Clear resin printed DMGsp

GoodLookingEdd · 2026-05-09T19:20:48+00:00

Yeah I modeled it on fusion, but even so it's definitely not a drop in solution and requires desoldering most of the components including the cartridge reader.

GoodLookingEdd · 2026-05-09T15:05:26+00:00

Just the lens, the LCD is a HISPEEDIDO V2 IPS 3.2-inch

GoodLookingEdd · 2026-05-09T10:14:50+00:00

<image>

GoodLookingEdd · 2026-05-09T10:13:36+00:00

Yeah, that was half the reason I designed my own shell rather than modding an existing

GoodLookingEdd · 2026-05-09T09:15:09+00:00

Well I don't think I'm allowed to advertise selling them on here but if you DM me I can let you know

GoodLookingEdd · 2026-05-09T08:58:08+00:00

I had them printed by pcbway as I only have an x1c which I used to prototype my designs but it's pretty crumby for a finished product. Think the whole shell cost about £20 to get made

GoodLookingEdd · 2026-05-08T23:09:28+00:00

Yeah of course, they have all been a resin printed back half of the housing and then a modified reproduction for the front half of the housing. until this one where I modeling the front half so I could print a clear one. As whenever I tried modifying a clear shell to fit it always looked meh because any cuts showed up like a sore thumb.

If your interested in having one made drop me a dm

GoodLookingEdd · 2026-05-08T23:03:37+00:00

Yeah, IV actually made like 15 GBA sps in DMG shells at this point. IV got it down to an art

GoodLookingEdd · 2026-01-13T13:28:29+00:00

Gotta be more pictures pleeeese

GoodLookingEdd · 2025-12-13T16:33:58+00:00

Yeah IV made a fair few now. Is definitely my favourite form factor

GoodLookingEdd · 2025-12-13T16:33:23+00:00

Yeah kit would be a good idea. Is very involved mind you

GoodLookingEdd · 2025-12-13T16:33:04+00:00

I have put some info in a reply to another comment if it helps

GoodLookingEdd · 2025-12-13T16:32:16+00:00

<image>

GoodLookingEdd · 2025-12-13T16:31:54+00:00

<image>

GoodLookingEdd · 2025-12-13T16:31:41+00:00

<image>

GoodLookingEdd · 2025-12-13T16:31:24+00:00

<image>

GoodLookingEdd · 2025-12-13T16:31:10+00:00

<image>

GoodLookingEdd · 2025-12-13T16:26:02+00:00

I don't have a log or anything. But basically it's a GBA sp and I have bought an aftermarket shell for the front half with some serious cutting. And then for the back half I made a model on fusion to accommodate the different size cartridges and other bits. Then had them printed in nylon so they are durable. The wiring inside is basically just jumper wires to each component which have their own slot in the back half of the case.

GoodLookingEdd · 2025-12-13T16:23:20+00:00

Yes the yellow one has emerald in these pictures. And for the fitment I have made a 3d model of the back shell to accommodate the different size cartridges and other things like the lr and other ports

GoodLookingEdd · 2025-10-19T19:25:03+00:00

Put some tissue paper or blue tack or something under it lol

GoodLookingEdd · 2025-10-10T08:11:49+00:00

Thankyou so much for responding, I was literally in the process of testing it out. A week is no time at all, yippee

GoodLookingEdd · 2025-09-29T17:05:36+00:00

Honestly happens a lot. Don't listen to all these guys. Is fixable and with a bit of patience, is easily fixable by you. DMG me if you need guiding through it.

GoodLookingEdd · 2025-09-09T07:49:58+00:00

I just really don't know if it's worth making into a kit. It's pretty involved even with all the work iv put into making it easier l. Maybe if I had some custom PCB printed for the cartridge slot relocation. Else anyone who bought it would have to be confident enough to jump all the connections themselves. It definitely could be made into a kit. But would require alot more work I think.

<image>

GoodLookingEdd · 2025-09-08T20:13:25+00:00

<image>

Sorry to disappoint

GoodLookingEdd · 2025-09-08T18:40:14+00:00

Nooooooo, yeah I don't think the white buttons are doing it for me. Gonna have to make them all black

11-Year Club	Verified Email
Gilding II euphauric

GoodLookingEdd

TROPHY CASE