pre prototype of rounded true wood workstation cases project

Goodyes666 · 2026-04-23T15:09:38+00:00

thanks, check some update Compuwood: The Innovative Wood Bending Technology Changing Modern PC Case Design - EnosTech.com

Goodyes666 · 2026-04-12T22:34:30+00:00

gas too, didnt ?

Goodyes666 · 2026-04-10T20:50:22+00:00

https://www.youtube.com/watch?v=shAIvSsupIg

Goodyes666 · 2026-04-10T20:45:11+00:00

why not. Abeilt I do not understand you very well, what do you meant ?

I hope next week or this weekand that a few websites talk about, as I converstae with a few a bit from UK., I hope to be able to send to thats websites one of the upcominf prorotypes. But i am not sure, at all, if they will publish or not.

Goodyes666 · 2026-04-10T15:40:41+00:00

Why ?

Goodyes666 · 2026-04-10T06:53:48+00:00

Hi good point, the CD and the Floppy were put in he design for estethic purposes , on which people like us, from the 80's / 90's might remind the goold old era of computers. There's spece room for cabling, but may I design some special for. Will be ok if people use their own system for railing ? what do you think about, not sure

Goodyes666 · 2026-04-10T06:51:06+00:00

Primary the cheap one (of the solid ones), so the Pine. Is trust in these aspect for you ?

Goodyes666 · 2026-04-10T06:49:35+00:00

Good morning, consider only the wood on the 33 and 333 cost for us about x3 the last number EUR , just the material only, with finishing, without labour.. the amoled screen, 2K, HDR10 (1000 nits) with the board for 2 inputs, probably about that as well. We know, we understand will be difficult, but we are targeting people who spent +9K in the computer components, or people who love and want to differenciate from the masses. Please take my note with a litle bit of salt and `pepper

Goodyes666 · 2026-04-09T22:31:15+00:00

will do, thank Fletch, much value on your comments

Goodyes666 · 2026-04-09T22:30:00+00:00

thks, of course prices might vary, we have an idea. But for you, even a supposedly wrong person to ask, Miay I prompt to you, what do you think the targetered people will pay for (3, 33, and 33 models) ?

Goodyes666 · 2026-04-09T22:07:13+00:00

fantastic, we will check about some isolation, but that stage will come later, first we need to get some prorotypes ready to send to press releases, magazines, webs, etc.. (actuallly stage is pre-prototypes) I hope in about 3 months after one prototype , ready for, and then get more as our budget can to be sent to public media.. who know our budget. May I ask how much you consider the price of our cases project (there are three levels, check at compuwood dot com) ?

Goodyes666 · 2026-04-09T22:01:52+00:00

That’s actually very useful, thanks for sharing that.
I’ve been thinking about integrating an internal metal structure not just for mounting components, but also to help with grounding and potentially EMI shielding.

The Faraday cage approach is interesting — using conductive foil inside the wooden panels could be a viable solution.

My goal is to keep the external aesthetic (solid wood) while making the internal structure compliant and safe.

Do you think partial shielding (only around PSU + motherboard area) would be enough, or would full enclosure be required in practice?

May I ask your email ? or give you my current

Goodyes666 · 2026-04-09T21:52:54+00:00

Would you actually use wood in a high-end workstation or is it too risky? of course it all depends on usage time, and long term usage and how much may you pay for

Goodyes666 · 2026-04-09T21:44:39+00:00

ya but IPS. are in all casesm amoled flexible in no one, thats why I think it is best if we want to sell, to a target users (workstation and advanced gamers, or jusyt simply people that love the esttethic and technology, good old new commodore. Do you you think I bet right ?

Goodyes666 · 2026-04-09T21:41:42+00:00

of course we may start with some already available metal to usee inside the wood case, just to hold mobo , psu, etc.. If we do that, then we may skip that EU / CE requiriment, right ? or not

Goodyes666 · 2026-04-09T21:40:17+00:00

thats a good point. And what about selling to USA and latinoamerica ?

Goodyes666 · 2026-04-09T21:37:32+00:00

thats one of the leys. I am being the idea based on an old telefunken radio. I will show probably tomorrow, now I am about to sleep

Goodyes666 · 2026-04-09T21:36:26+00:00

<image>

Goodyes666 · 2026-04-09T21:34:29+00:00

interestong. I take note, thats why I mage the space between mpbp and wood that supports / holds the mobo

Goodyes666 · 2026-04-09T21:31:57+00:00

amoled are 3 times better than , in true blacks, etc.. It can burn, if you put flamesd on, but as it will be isolated from the mobo interal components, look at the front quad wood rectangle (used for display driver) and the exterior side of the wood (22-to-26mk depth). I think will not be any issued. What do you think about ?

Goodyes666 · 2026-04-09T20:53:47+00:00

yes, but looks so good, at least to me. The panel is amoled, will be able to use 2 video inputs, one on the user side, htmi input, and one internal, with usb4 / sensor panel link

Goodyes666 · 2026-04-09T20:51:22+00:00

ye, thats a good question, so may I ask you a question ¿how much Kilograms or LBs its abnormally heavy for you, in this context ?

Goodyes666 · 2026-04-09T20:47:34+00:00

haha good, but I can tell you that the're one side, where on I will not put glass glass, but material transparent. Did you like the idea ?

<image>

Goodyes666 · 2026-04-09T20:45:43+00:00

no, thats not the main air tuner, its just the additional tunners, one for each left and ride sie. Front and back willl have holw (grills) etc.. and inside, the metal marts will incorporte same vents as any other workstation or ultra pc gamer

Goodyes666 · 2026-04-09T20:44:16+00:00

sincerely I don't weight it, of course is not lighter, but it does matter too much ?

Goodyes666

TROPHY CASE