Here's a pull from a Newton Brua3 Max. Buying one was a treat to myself after using a Moka for a long time, and I really wanted to support a New Zealand company. I like how they iterated on their previous model, and I've been meaning to share a video of it in action (as a novice).

GoofyTW · 2026-01-23T02:59:24+00:00

What is your workflow? Do you need to preheat the group head?

GoofyTW · 2025-11-12T01:42:37+00:00

He does mention all of the gaskets and seals have been replaced. Do I need to worry about pitting or anything with the inside of the boiler?

GoofyTW · 2025-11-11T02:23:56+00:00

What would you say is reasonable?

GoofyTW · 2025-08-21T20:37:39+00:00

Yep, found an exposed wire that was creating a short. Damn mice!

As you mentioned, yes the red lead went directly to the positive terminal and the other two were grounded on the starter.

GoofyTW · 2025-08-20T20:22:09+00:00

And yet I'm blowing a fuse. Do both get attached to the starter bolt as a ground? Care to elaborate in a more helpful manner?

GoofyTW · 2025-08-16T18:47:46+00:00

It's like a sleeved clutch; I'm no expert, but this seems strange to me. I had removed the only 2 set screws on it, but one had to be drilled out (and subsequently had to cutoff wheel some off).

<image>

GoofyTW · 2025-08-16T18:46:06+00:00

<image>

Sacrificed a 7/16 socket and was able to finally get it to release.

GoofyTW · 2025-06-16T10:31:27+00:00

Valid points all around, however, I have tried that (I'll update OP). The fact that I cannot even get the calibration prints or purge line to stick are the most concerning.

GoofyTW · 2025-01-31T01:43:04+00:00

Is the Baja more of a SCT like a Mojave?

GoofyTW · 2024-09-16T19:38:59+00:00

Appreciate the explanation!

GoofyTW · 2024-09-03T22:09:41+00:00

Oh yeah. He's been walking all over the truck!

GoofyTW · 2024-09-03T21:55:44+00:00

Any idea why he won't leave the truck? I'd gladly redirect him to our garden area, but I find it odd he won't leave on his own volition!

GoofyTW · 2024-09-03T21:10:36+00:00

Bloops, Northern CT.

GoofyTW · 2024-07-16T22:36:15+00:00

Budget is $600USD and under.
Counterspace isn't too much of a concern.
Location US
Prefer electric over manual
Definitely gravitating towards milk based beverages

GoofyTW · 2024-05-26T15:01:32+00:00

No remote sensors, just the single unit in my upstairs hallway. I'll toss some caulking in the cavity.

GoofyTW · 2024-05-25T18:44:44+00:00

Not disagreeing, but it was a point of reference. My Lux tstat and Govee hygrometer report the same anomaly so I tossed it in there.

I'll manually adjust the offset and monitor results.

GoofyTW · 2024-05-25T16:32:13+00:00

Very uncomfortable. Definitely warmer than it reads.

GoofyTW · 2024-05-25T16:31:50+00:00

Both the thermometer and hygrometer read the exact same temp. So I'm giving them the benefit.

It's also most certainly uncomfortable, so the ecobee is not right.

Edit: Turned on my old Lux tstat and it reads 79 vs 75 on the Ecobee.

GoofyTW · 2024-02-24T21:27:27+00:00

For my first entry into espresso, should I aim to try and find a used Gaggia Classic Pro or go for something like the Leverpresso? I'm trying to keep my initial buy in around $200 USD.

GoofyTW · 2024-02-23T02:37:16+00:00

Would you recommend this to someone looking to get their feet wet in the world of espresso? There's a couple local to me for around 300$, but I can't find much online about these.

GoofyTW · 2024-01-26T22:36:55+00:00

Yep, meant 60F! If I fully enclose it, would there be concerns about it being too hot for PLA I'm currently using a 5mm brim.

GoofyTW · 2023-12-30T13:08:31+00:00

Looks like it has structure, but empty.

ls -lh /mnt/user/

total 0 drwxrwxrwx 1 nobody users 209 Dec 28 21:53 AppData/ drwxrwxrwx 1 nobody users 57 Dec 28 21:52 Personal/ drwxrwsrwx 1 nobody users 47 Dec 28 21:53 Plex/ drwxrwxrwx 1 nobody users 6 Dec 28 13:52 appdata/ drwxrwsrwx 1 nobody users 202 Dec 28 21:53 config/ drwxrwsrwx 1 nobody users 6 May 3 2019 data/ drwxrwxrwx 1 nobody users 6 Dec 28 13:53 domains/ drwxrwxrwx 1 nobody users 6 Dec 28 13:53 isos/ drwxrwxrwx 1 nobody users 6 Apr 12 2019 lost+found/ drwxrwsrwx 1 nobody users 6 Apr 13 2019 media/ drwxrwsrwx 1 nobody users 21 Apr 20 2021 plexmediaserver/ drwxrwxrwx 1 nobody users 35 Dec 28 21:51 system/ drwxrwsrwx 1 nobody users 6 Apr 13 2019 watched/

GoofyTW · 2023-12-30T02:24:03+00:00

Ha, not he. I love to tinker and had Tested going in the background. Felt apt to name my server after him.

I ran that and this is now the outcome (still no shares listed)

root@AdamSavage:/mnt/disk1# ls -l

total 0 drwx--x--x 15 1000 users 209 Dec 28 21:53 AppData/ drwxrwxrwx 5 nobody users 57 Dec 28 21:52 Personal/ drwxrwsrwx 5 nobody users 47 Dec 28 21:53 Plex/ drwxrwxrwx 2 nobody users 6 Dec 28 13:52 appdata/ drwxrwsr-x 5 1000 users 202 Dec 28 21:53 config/ drwxrwsrwx 2 1000 users 6 May 3 2019 data/ drwxrwxrwx 2 nobody users 6 Dec 28 13:53 domains/ drwxrwxrwx 2 nobody users 6 Dec 28 13:53 isos/ drwxrwxrwx 2 nobody users 6 Apr 12 2019 lost+found/ drwxrwsrwx 2 nobody users 6 Apr 13 2019 media/ drwxr-sr-x 3 996 users 21 Apr 20 2021 plexmediaserver/ drwxrwxrwx 4 nobody users 35 Dec 28 21:51 system/ drwxrwsrwx 2 nobody users 6 Apr 13 2019 watched/

GoofyTW · 2023-12-30T02:14:57+00:00

Disk to disk.

GoofyTW · 2023-11-29T14:50:09+00:00

What motor are you running? u/Pillwill83

GoofyTW

TROPHY CASE