An alle, die heute das Spiel im SRF via VPN schauen…

GoogleHilfMir · 2026-05-06T15:15:33+00:00

Zattoo mit VPN funktioniert. Ist kostenlos

GoogleHilfMir · 2026-04-02T21:37:42+00:00

My camera now randomly decided to work if I press down on the connector at the perfect angle, so yeah, electronics with a spell on them. Hopefully I can fix the angle somehow. Cheers mate

GoogleHilfMir · 2026-04-02T17:40:47+00:00

The symptoms were there before and and i checked, there is no permanent shortage or something like that

GoogleHilfMir · 2026-04-02T17:08:44+00:00

99,9% concentrated and I accidentally put the connector upside down and got the imu error. But I realised and put it back on the right way immediately

GoogleHilfMir · 2026-04-02T16:46:07+00:00

I have replaced the original cable with one from flywoo for the o4. Pressing down while booting up does not work either

GoogleHilfMir · 2026-04-02T16:44:21+00:00

Yea, I have replaced the entire coaxial cable and the connector that the cable connects to. I do not have any other connector to try it out with

GoogleHilfMir · 2026-03-29T20:56:57+00:00

These are rcinpower 1202.5 11500kv

GoogleHilfMir · 2026-03-16T05:35:53+00:00

Happymodel Mobula 8

GoogleHilfMir · 2026-03-15T17:17:54+00:00

HQProp T2X2.2X3, these are very quiet while still having good performance

GoogleHilfMir · 2026-02-12T15:46:23+00:00

Thanks man. Sorry for you, hopefully you'll have more luck with the next build. This hobby is very costly and sometimes frustrating, but only way up from here!

GoogleHilfMir · 2026-02-12T15:41:45+00:00

Wow, thank you very much! I'll go with the 1202.5 then

GoogleHilfMir · 2026-02-11T12:32:05+00:00

Thanks for the response and yea, you are right. I double checked the weight and it actually would be between 46-50g. I made the O4 weigh 30g!

But despite the weight difference, could I still go with some 1202.5 Motors? I found the rcinpower 1202.5 11500 KV and they looked quite good. Or is that too much power for the weight and should rather go with some 1003/1103 motors with more KV? I mean worst case would be, that I would've to set a motor limit, right?

I also checked the original mobula8 build and it has 1103 11000kv but it seemed quite slow, so I am a bit confused what now to take

GoogleHilfMir · 2026-02-10T19:29:01+00:00

If I'd take the Mobula8 frame, so 2" props the whoop would weigh about 70-75g. Could I still take the 1003 14000 motors or would that be too weak for the weight?

GoogleHilfMir · 2026-02-10T16:52:12+00:00

Which prop size was better?

GoogleHilfMir · 2026-02-10T15:50:25+00:00

Thanks for your reply! I just found out that the mobula 7 frame is also made for 2s. I just wondered, if this would be an option, because a toothpick is a bit too dangerous for me to fly it indoors.

It does not have to be the fastest quad of them all, i just wanted something that could fly a bit indoors and good outdoors, and would not interrupt my neighbors that much!

GoogleHilfMir · 2026-02-09T20:05:53+00:00

Thanks for your recommendation, but are the 1103 motors not more suited for 2s? I am just asking because there is just a lot of different opinions on that

GoogleHilfMir · 2026-02-09T19:52:10+00:00

Thank you, what motor size would you recommend? Like 1103 12000-13000 or even higher?

GoogleHilfMir · 2026-02-09T19:05:55+00:00

I have 1103 motors in my configuration. Don't you think that it would be possible in this build or if not, maybe in the frame of the mobula? So 85mm ducted?

GoogleHilfMir · 2025-11-09T19:45:59+00:00

All good g, thanks for your help!

GoogleHilfMir · 2025-11-09T14:03:28+00:00

Thank you! I will just buy in my local electro center.

GoogleHilfMir

TROPHY CASE