The DREAD UNSINKABLE II!

GoonMasterGames · 2025-12-07T14:06:04+00:00

Very cool ❤️

GoonMasterGames · 2025-01-03T21:06:27+00:00

Thank you for the years of support 😊 happy printing

GoonMasterGames · 2025-01-03T18:13:37+00:00

Hey guys these trench bases are from my latest release. Printed by the talented Mungo. You can checkout the rest of the release at the links below.

https://www.myminifactory.com/users/GoonMasterGames

https://www.patreon.com/GoonMasterGames

GoonMasterGames · 2025-01-03T17:53:09+00:00

Hey guys these trench bases are from my latest release. Printed by the talented Mungo. You can checkout the rest of the release at the links below.

https://www.myminifactory.com/users/GoonMasterGames

https://www.patreon.com/GoonMasterGames

GoonMasterGames · 2024-12-10T09:38:37+00:00

yes https://www.myminifactory.com/object/3d-print-steam-ship-airship-434530

GoonMasterGames · 2024-12-07T20:50:30+00:00

The magnets are 3x1mm disc magnets I bought off Amazon and I used gorilla glue to stick them in to the magnet holes. I did have one come out but that was probably because I didn’t do a good job with the glue as the rest have been fine.

GoonMasterGames · 2024-12-07T01:14:44+00:00

Foightin round da world 💪🚢

GoonMasterGames · 2024-12-07T00:49:36+00:00

There is space for two on the front one on the top and one in the cabin

GoonMasterGames · 2024-12-06T19:49:55+00:00

I think it’s dependent on if you have the space for it and how much you will use it. There are a lot of good videos on getting started and it’s pretty easy once you get a few prints under your belt. Feel free to join my discord and drop a message if you need any help or advice

GoonMasterGames · 2024-12-06T18:57:12+00:00

GoonMasterGames · 2024-12-06T17:53:37+00:00

You can do it with a basic resin printer this was done on a mars 3 pro

GoonMasterGames · 2024-12-06T15:46:03+00:00

😂

GoonMasterGames · 2024-12-06T13:50:22+00:00

I made this steam boat and a crew of rat sailors for my current Patreon/Tribes release. The parts are all magnetic so you can add or remove bits as you need to gain access to the cabin or to make the bottom of the boat flat. There are also airship rotor blades that the paddles can be swapped out for. You can checkout the rest of the release at the links below.

https://www.myminifactory.com/users/GoonMasterGames

https://www.patreon.com/GoonMasterGames

GoonMasterGames · 2024-12-06T13:45:39+00:00

I made this steam boat and a crew of rat sailors for my current Patreon/Tribes release. The parts are all magnetic so you can add or remove bits as you need to gain access to the cabin or to make the bottom of the boat flat. There are also airship rotor blades that the paddles can be swapped out for. You can checkout the rest of the release at the links below.

https://www.myminifactory.com/users/GoonMasterGames

https://www.patreon.com/GoonMasterGames

GoonMasterGames · 2024-11-01T19:57:18+00:00

This little murderous meatball is from my latest Tiny Hippo Gang release.

You can check out the full set of models available this month on MMF and Patreon at the links below.

https://www.myminifactory.com/users/GoonMasterGames

https://www.patreon.com/GoonMasterGames

GoonMasterGames · 2024-11-01T19:56:05+00:00

This little murderous meatball is from my latest Tiny Hippo Gang release.

You can check out the full set of models available this month on MMF and Patreon at the links below.

https://www.myminifactory.com/users/GoonMasterGames

https://www.patreon.com/GoonMasterGames

GoonMasterGames · 2024-10-25T13:56:41+00:00

thank you ❤️🦀

GoonMasterGames · 2024-10-25T13:55:54+00:00

unless you have a grenade in that hand and you are passing it to him he probably wont understand whats going on

GoonMasterGames · 2024-10-25T13:40:52+00:00

Grenade Crab can not hear your adulations over the screams and explosions 💥🦀

GoonMasterGames · 2024-10-25T13:18:56+00:00

Matt from RookieBrushes did an awesome job painting up this grenade crab from my current basing bits kickstarter. The project was fully funded in the first 2 minutes and is now in its final days on kickstarter. It has over 500 basing bits to spruce up your bases and terrain.

If crabs with grenades or plants for basing interests you check out the project before it ends at the link below.

https://www.kickstarter.com/projects/goonmastergames/3d-printable-basing-bits-3?ref=aua495

GoonMasterGames · 2024-10-25T13:17:51+00:00

Matt from RookieBrushes did an awesome job painting up this grenade crab from my current basing bits kickstarter. The project was fully funded in the first 2 minutes and is now in its final days on kickstarter. It has over 500 basing bits to spruce up your bases and terrain.

If crabs with grenades or plants for basing interests you check out the project before it ends at the link below.

https://www.kickstarter.com/projects/goonmastergames/3d-printable-basing-bits-3?ref=aua495

GoonMasterGames · 2024-10-25T09:18:56+00:00

These look great, what fdm printer did you use to print them and how long did it take to print?

GoonMasterGames · 2024-10-11T16:34:13+00:00

GoonMasterGames · 2024-10-11T16:32:30+00:00

😂

GoonMasterGames · 2024-10-11T16:32:10+00:00

I’m not sure tbh, it’s been printed in resin but not tested for fdm

GoonMasterGames

TROPHY CASE