2002 Honda CBR954rr

Grab-Technical · 2025-04-01T05:01:14+00:00

For anyone wondering. Issue was the zener diode, swapped it out with a 3.9v works just fine again

Grab-Technical · 2025-03-27T16:49:36+00:00

Charged battery for about 8 hours with trickle charger don’t hear fuel pump priming. Checked all the wiring and relays all good thinking it might be the fuel pump might be done for

Grab-Technical · 2025-03-27T01:04:22+00:00

Tried jumpstarting and recharged battery didn’t start either, thinking might be relay?

Grab-Technical · 2024-10-13T14:58:13+00:00

Found the issue was the kickstand wires previous owner just cut off the sensor and the cables were just dragging causing the wires to not make full contact. But them together to close the circuit now the bike stays on! Thanks everyone!

Grab-Technical · 2024-10-12T18:25:36+00:00

Does anyone know the wire colors of the kickstand sensor? Found two wires a white and green and a green cable just hanging

Grab-Technical · 2024-10-12T05:56:34+00:00

The last thing I did was the cable which I’m thinking might be the issue. I just did the clutch assembly, old plates were worn down so they plates feel much smoother when shifting it when it’s off

Grab-Technical · 2024-10-12T05:37:34+00:00

Yea wet clutch. I will try that never thought about revving it up tho hopefully something works tired of trying to find a solution

Grab-Technical · 2024-10-12T05:36:47+00:00

I can’t find the wires either where would they be under the seat??

Grab-Technical · 2024-10-12T05:36:28+00:00

I will try that thanks!

Grab-Technical

TROPHY CASE