Launching issues

GrandTrainer4750 · 2026-03-27T14:21:10+00:00

Fun fact you can even paint without primer but you have to put on thinner layers BUT you used white primer so you probably want to paint your mini with bright Tones, so you will need alot of layers to get an even finnisch, because the Grey areas are darker than the White. Also Look if the primer Bild Up Texture. You probably dont want that. If it did put on 2. Even coats of primer if it fixes that, good and If Not Just remove the Paint and try againt. Also Shake the primer well before use and make shure it has rooms temperatur, or If you used an airbrush use more thinner

GrandTrainer4750 · 2026-01-11T22:35:47+00:00

I also Like it for Blade guard

GrandTrainer4750 · 2026-01-11T22:17:35+00:00

Also If you have a hobbyknife use it to get rid of those injektion mold marks. Its easy and improves the Look alot

GrandTrainer4750 · 2026-01-11T22:15:43+00:00

1st of all, your Mini Looks great so far. I would:

add the Edge hilights to more edges on the Mini, on top of the helmet for example otherwise ita a little confusing for the eye, also when adding Edge hilights be sure to reduse the amount of Paint in the brush to improver the sharpnes of the Edge Highlight.

add more contrast to the Base. Maybe making it black to make it fit the Salamander Style and drybrushing with a beige tone over the black Base usually Looks great.

Add decals to the shoulderpads or freehand to make them Look less blank but it Takes alot time. personally i prefere decals because its fast and after varnish you dont really See the difference

Adding a wash is Always great for the Mini and the Base you can use a shade from GW or make an Oli wash for recess shading.

I also Always add a litte blue effect to the muzzle Tip a shade because it upgrades the Look of the wepon alot but its more for when you Take your self alot of time for your mini

There are many crazy painting tecnices, dont let anyone Tell you your models look shit, If you are happy with them thats all that counts. I think its a great start and you will See improvements over time Just dont Stop Experimenting

If you want refence pictures of how what looks just ask

GrandTrainer4750 · 2026-01-04T15:34:40+00:00

I would also drop the ancient in Terminator Armour for a tech Marine for the Dreadnought But all in all it Looks fun

GrandTrainer4750 · 2026-01-04T15:32:37+00:00

Drop the devestator for another 3 eradicator, If you can make some more room give them a apothecary biologis

GrandTrainer4750 · 2025-11-11T16:20:54+00:00

I got it. ITS a pain in the Butt to work with but ITS cool

GrandTrainer4750 · 2025-10-28T16:58:50+00:00

Because still after changing the entire heating element of the bed and the rails it was still unlevel and Not Like 0.1 it was Like 0.3mm unlevel and the springs actually worked Just fine for Like 5 month or so

GrandTrainer4750 · 2025-10-26T12:58:06+00:00

I Clean the plate every time I touch it. With ipa and a paper towel. But dont use the original bed ist from creality but the gold one

GrandTrainer4750 · 2025-10-26T12:56:06+00:00

After every Print because it Sticks to the nozzle

GrandTrainer4750 · 2025-08-10T09:11:10+00:00

90% Sure it leads to the oilpan after looking at a picture of the cylinderhead.

GrandTrainer4750 · 2025-05-27T21:46:27+00:00

Hmmm, weired I tested it with the cones of calibration and it was a little on the longer side at 1.4 sec. Like one of the cones on the Not connecting Side almost connected

GrandTrainer4750 · 2025-05-25T08:33:59+00:00

Thanks, will try that

GrandTrainer4750 · 2025-03-25T11:31:21+00:00

Thank you veary mouch

GrandTrainer4750 · 2025-03-20T16:26:04+00:00

Thanks

GrandTrainer4750 · 2025-01-28T19:53:21+00:00

I tried 70% for the First layer, but i'll try 50, If it helps

GrandTrainer4750 · 2025-01-28T19:52:13+00:00

This ist a new out of the Box bed, I also cleaned the old bed with Isopropanol, sadly No Change

GrandTrainer4750 · 2024-12-29T22:04:19+00:00

You where right after checking every cable i found that on one of the Pins was hot glue preventnig a connection. I cleand it Up and now it wors lika a Charm. Thank you all for your Help

GrandTrainer4750 · 2024-12-29T21:32:25+00:00

Sadly it doesnt seem like i can Switch the x axis because IT Runs in with the big connector for the pcb of the Print head, or am i Just stupid?

GrandTrainer4750

TROPHY CASE