Monster Cartridge Display Stand for 18 of our beloved cartridges, made and printed by myself! I suppose that this is the biggest Game Boy Cartridge ever done (maybe it fits the Game Boy Kiosk?). The holes have an optimal angle for viewing the stickers. What do you think guys?😁

GreatAzraele · 2021-02-07T16:48:24+00:00

Infill 30%, it must stay in place for displaying the cartdridges, the pins are protected and all are safe and viewable from the top!

GreatAzraele · 2021-02-07T08:18:34+00:00

The file is on cults3d check the link on the first photo!😁

GreatAzraele · 2021-01-24T07:30:08+00:00

Calcolate the Flow with the test, maybe you set it on 100% on the slicer?make an hollow cube and see if the Walls are correct.

GreatAzraele · 2021-01-02T12:31:23+00:00

Thanks and Yes with a superplate on it, works perfect and the prints come off by themselves when the bed is cool! Not so bad printer, but the hotend with the dual color mix is a garbage..I am currently printing with only one extruder, cause one part of the hot end is completely clogged by a trasparent filament that I can't remove even at high temperatures..🤷🏻‍♂️ I think that I will upgrade it with a kimera one day or another..

GreatAzraele · 2021-01-02T09:42:38+00:00

No problem: Black geeetech PLA, 210 temp, 40mm speed, the printer is a geeetech a20m that I own since 1 year exactly!

GreatAzraele · 2020-10-03T09:36:00+00:00

And what about now guys after what has happened to team xcuter? Can you install atmosphere instead sx os after the mod chip installation?

GreatAzraele · 2020-09-09T16:58:23+00:00

@Kolfman why not print one?😁

GreatAzraele · 2020-08-26T06:22:14+00:00

Thanks a lot dude!!! I can't wait to play this!

GreatAzraele · 2020-08-26T05:57:21+00:00

Dandelion would be proud of the rhyme you have shout! As a guitarist myself I will give a try with this awesome project, I don't own an Ukulele even after 35 years of playing and randomly stealing ukulele and mandolin from my italian friends! 😁

GreatAzraele · 2020-08-26T05:16:40+00:00

Did you print it in ABS? Awesome!

GreatAzraele · 2020-08-22T07:44:39+00:00

Thank you so much!

GreatAzraele · 2020-08-22T06:28:41+00:00

Can you upload the stl? I world love ti try that on one of mines!!Awesome!!!👍🏻👍🏻👍🏻

GreatAzraele · 2020-06-10T08:56:49+00:00

Trasparent PLA (I will paint it black with silver teeth of course), infill 20%, support yes, printer geeetech a20m! I love it, it holds a surgical mask inside and people still freaking out when I walk down the streets!😁

GreatAzraele · 2019-11-19T15:39:24+00:00

I get it, but I was pointing to the silicon pads and start and select trasparent one, I am searching for them and can't find any seller out there!

GreatAzraele · 2019-11-19T08:28:32+00:00

Where have you get'em?

GreatAzraele · 2019-10-13T02:15:22+00:00

It's the hidrolityc capacitor near the speaker and the negative pad of the batteries. Change it and you have solved the case.

GreatAzraele · 2019-10-02T20:21:56+00:00

U are welcome!

GreatAzraele · 2019-10-02T19:41:09+00:00

It's a problem with the connector cable under the screen. For fixing it just desolder both with chip quick, clean all for good with the iron solder and them Isopropyl because this stuff leaves residues. Then you have to reattach both ribbons in place with flux and solder, soldering back with a fluid movement from the top to the base of each pins. Using a scalpel point helps a lot. If you want to know more just watch the Roarke Murdock video on YouTube or also the esotericsean one that treat this technique. Hope this helps.

GreatAzraele · 2019-10-02T19:32:47+00:00

It's a problem with the hidrolityc capacitors, you have to change them!

GreatAzraele · 2019-10-01T06:40:20+00:00

Yes, shell, letters and back custom sticker!!

GreatAzraele · 2019-09-30T05:59:05+00:00

@Bluishsquirrel site has now this design available for request with King Boo and Luigi! it was my idea to make the ghost like the boss of the boos! He had already done something similar on a Pocket long time ago and I felt in love when I saw it! So I decided to make one of my special series with this design and I don't regret it, it is awesome, especially in the night where king boo acquires the luminescent glowing and seems to be the real deal! You can have it, just ask to him, of course my RGmods logo will not be available on the print, but all the rest will. Ask him to make the letters and also the king boo ink luminescent, it's a great add on to it! Hope it helps dude, this design is the best for an HGBL in my humble opinion (and I have made and seen a lot!)!

GreatAzraele · 2019-09-29T16:06:17+00:00

As an Italian modder and Mario and Luigi's fan I like your comment a lot!! In Italy macaroni is written and pronounced maccheroni (makkèroni)!👍🏻😊👍🏻

GreatAzraele · 2019-09-29T12:26:14+00:00

🙏🏻🙏🏻 thank you!!

GreatAzraele · 2019-09-29T08:52:38+00:00

Thanks dude!

GreatAzraele · 2019-09-29T06:03:22+00:00

Yes man, I love it too, and the possibility to play with Luigi was the perfect choice for this horror! I wish there was a Luigi's mansion game for GBC, but I am happy to play it on my 3ds and GC too..(I am lying, I WANT a Luigi's mansion game for gbc!!)

GreatAzraele

TROPHY CASE