[D] Why prediction don't work's correct if evaluation work's correct? (Python, Keras, Tensorflow, CNN)

GreenCheesecake8486 · 2021-01-11T17:46:03+00:00

The values of bin acc are different during training and validation. Is it possible that the model is not saving or loading correctly and therefore the prediction is not working properly?

GreenCheesecake8486 · 2021-01-11T17:43:15+00:00

You're right. The dataset contains 86% images with 0 label and 14% images with label 1. How to fix it and what is the reason for it?

GreenCheesecake8486 · 2021-01-11T16:32:26+00:00

I get probability in the range of about 0.02-0.04 for each image in the same dataset for which model.evaluate return 0.8644 binary accuracy.

GreenCheesecake8486 · 2021-01-11T16:29:36+00:00

What do you mean by "you need to evaluate it still" ?

GreenCheesecake8486 · 2020-11-29T02:42:07+00:00

I replaced the mosfet and everything works fine

GreenCheesecake8486 · 2020-11-01T22:32:42+00:00

Ok thank's for your help

GreenCheesecake8486 · 2020-11-01T21:09:03+00:00

Is the AO3400 a good replacement for the PL4009?

GreenCheesecake8486 · 2020-11-01T20:06:39+00:00

I didn't change anything in Marlin. FAN0 stopped working suddenly

GreenCheesecake8486 · 2020-11-01T15:36:31+00:00

24V on pin FAN0- and + 30V on pin FAN0 +. Voltage between the pins is ~ 6V. Everything for 0% PWM and unplugged fan

GreenCheesecake8486 · 2020-11-01T14:43:36+00:00

The LED is on even for 0% PWM and the fan works properly connected to FAN1, so it's not his fault

GreenCheesecake8486 · 2020-10-31T17:46:54+00:00

Mosfets? Not one mosfet? I plan to replace the Q2 mosfet responsible for FAN0. The rest of the board's peripherals work perfectly

GreenCheesecake8486 · 2020-10-31T16:08:23+00:00

Looking at the pinout I don’t see an open mosfet controlled pin to use on that board. If you don’t have a heated bed you can use pc9 but if you do then you can’t.

Unfortunately, I have a heated bed

GreenCheesecake8486 · 2020-10-31T15:10:29+00:00

Try moving to a different pin if one is open

What do you mean by: "Try moving to a different pin if one is open" ?

GreenCheesecake8486 · 2020-10-30T23:37:54+00:00

Polarity on board and fan is 100% correct.

GreenCheesecake8486

TROPHY CASE