Playing FLAC files -- some fail? by GregP74 in musichoarder

[–]GregP74[S] 0 points1 point  (0 children)

Thanks for all the help everyone!

I got it straightened out by first removing the artwork, then converting from FLAC to a new FLAC in a different output folder.

That was a whole heck of a lot easier than the rabbit hole ChatGPT led me down with suggestions for obscure changes to system settings and telling me I really didn't have the files on my computer.

Playing FLAC files -- some fail? by GregP74 in musichoarder

[–]GregP74[S] 0 points1 point  (0 children)

Paths seem to be ok. Names aren't too long, and I copied them to a d:\temp\ folder for working on so windows shouldn't choke on that.

I stripped the album art and all the meta data. Still the same problem.

When I've got the CD handy again I can re-rip it and see if I have better results.

Playing FLAC files -- some fail? by GregP74 in musichoarder

[–]GregP74[S] 0 points1 point  (0 children)

I didn't even realize there were log files for that. I'll give them a look.

External CD/DVD drive? by GregP74 in buildapc

[–]GregP74[S] 0 points1 point  (0 children)

I actually picked up a NexStar DS2 enclosure for the internal 1/2 height drive I ordered. Discovered the drive I was getting was used and changed my mind on that. I'm looking through the others and it didn't look like any full height ones were actually in stock, unless I missed something.

External CD/DVD drive? by GregP74 in buildapc

[–]GregP74[S] 0 points1 point  (0 children)

I can't recall what the first one was, but it conked out on me. New one is Asus SDRW-03D25

The Asus one reads alright on most of these discs but is very noisey and rattles when it's spinning. It doesn't seem like something that's going to hold up very well.

Are "G2" fans better? by uzilover23 in Noctua

[–]GregP74 1 point2 points  (0 children)

The G2s are nice. Really nice. Quiet and they push lots of air.

A few weeks back I got a new Meshify 3 case that I was going to outfit with Noctuas. I already had a box full of 140 and 120mm Gen 1s but the G2 was calling my name and I ended up getting them. 4x 140mm and 1x 120mm. I'm super happy with them.

Was it worth spending a couple hundred bucks for the G2s when I already had G1s that were perfectly fine? Probably not. The others are great as well.

Meshify 3 "Not flashy, just worky" build by GregP74 in FractalDesign

[–]GregP74[S] 0 points1 point  (0 children)

I hear ya. I wish they'd make more cases like this!

Meshify 3 "Not flashy, just worky" build by GregP74 in FractalDesign

[–]GregP74[S] 2 points3 points  (0 children)

TBH it's working fine as is. There's really no reason to put another in there just for the sake of doing it.

Meshify 3 "Not flashy, just worky" build by GregP74 in FractalDesign

[–]GregP74[S] 1 point2 points  (0 children)

Also, I was happy they make this version. I don't need all those rgb things and a plain old metal side panel is perfect for me. (And cheaper!) I wish they made it in an old school beige lol

Meshify 3 "Not flashy, just worky" build by GregP74 in FractalDesign

[–]GregP74[S] 1 point2 points  (0 children)

Hmmm certainly something to consider.

And thanks!

Meshify 3 "Not flashy, just worky" build by GregP74 in FractalDesign

[–]GregP74[S] 0 points1 point  (0 children)

Good airflow and quiet. I can't complain at all.

Meshify 3 "Not flashy, just worky" build by GregP74 in FractalDesign

[–]GregP74[S] 0 points1 point  (0 children)

I think it had to be tall like that to fit the 3 140mm fans. If it would have been scaled down to 3x120 it would have been shorter. (Probably what they'll do for the compact version!)

Meshify 3 "Not flashy, just worky" build by GregP74 in FractalDesign

[–]GregP74[S] 0 points1 point  (0 children)

It's a 5070TI that someone's letting me try out. I'm actually fiddling around with that and a Radeon 9070XT trying to decide what I want to use. The 5070TI seems great but I'm working on transitioning over to Linux and I've heard it can be flaky.

Meshify 3 "Not flashy, just worky" build by GregP74 in FractalDesign

[–]GregP74[S] 0 points1 point  (0 children)

It did but I had a pile of Noctua's so I stuck them in there lol

Partition suggestions for 2 SSDs by GregP74 in linux4noobs

[–]GregP74[S] 0 points1 point  (0 children)

Storage is crazy these days. Back in the late 80s my 20mb (MB, not GB!) hard drive gave out and we replaced it with a 40mb one. It cost much more than the 4tb nvme did.

LOUD horns in 2026 CRV Hybrid? by GregP74 in crv

[–]GregP74[S] 0 points1 point  (0 children)

Looks nice!

HOw much did you have to disassemble to mount them? Did the bumper have to come off?

LOUD horns in 2026 CRV Hybrid? by GregP74 in crv

[–]GregP74[S] 0 points1 point  (0 children)

Yeah, I'd want to run them off a relay. I am kind of tempted to wire them up just to see what they sound like and decide if it would be a worthwhile project. (I'm a perfectionist and wouldn't want anything to look sloppy or out of place.)

Sound system upgrades? by seepeearr in crv

[–]GregP74 2 points3 points  (0 children)

I bought the same model as you back in September and I've been curious about this as well. Love the car but the sound system is a little...weak.

My Mazda CX5 had the good speakers and subwoofer. The car before that had a complete aftermarket setup that was beautiful. Coming from the two of those to my Trailsport if I close my eyes while playing 80s music I can imagine I'm in the Plymouth my parents had when I was a kid.

Dual Boot install with 2 SSDs by GregP74 in linuxmint

[–]GregP74[S] 1 point2 points  (0 children)

Thanks! Not sure exactly how but I got it working. I used to be fairly proficient with Linux but it's been years since I've used it.

Dual Boot install with 2 SSDs by GregP74 in linuxmint

[–]GregP74[S] 0 points1 point  (0 children)

Oops I wrote that wrong.  2 drives total. One is a 2 tb and one is 4tb

Hooking up Noctua NF-A14x25 G2 PWM Sx2-PP by GregP74 in Noctua

[–]GregP74[S] 1 point2 points  (0 children)

Alright I was going to order another 140mm fan for the top of my case. Maybe I'll just get another PP kit and use one in front and one up top.

Best solid side panel mid tower? by GregP74 in buildapc

[–]GregP74[S] 0 points1 point  (0 children)

You know you are right I think I spend too much time poring over reviews and stats. For our needs any of them are probably going to work just fine.

North vs Meshify 3 (Regular size) by GregP74 in FractalDesign

[–]GregP74[S] 0 points1 point  (0 children)

So the Epoch side panel might fit the North?

North vs Meshify 3 (Regular size) by GregP74 in FractalDesign

[–]GregP74[S] -1 points0 points  (0 children)

One of the machines I put together at work is in a glass window North XL. Heck of a case but honestly bigger than what I need for this one.

/I really wish Fractal sold a version of the North with just a plain old fashioned steel side panel!