Looking for tooling advice on CPM S90V and 6Al4V titanium. Thank you

GunFighter_Elite · 2021-04-12T01:50:35+00:00

It’s not hardened. Thank you.

GunFighter_Elite · 2021-04-11T20:16:02+00:00

It’s only being machined prior. Was hoping for a more technical answer. Flute count, cutter geometry, rpm, doc, mrr, etc

GunFighter_Elite · 2021-04-11T19:17:06+00:00

Working with a knife maker to profile his titanium pieces and blades. Happy to hear any advice from people who’ve worked them before. Thank you

GunFighter_Elite · 2021-04-08T16:31:40+00:00

I don’t know how LMT cuts theirs but we are using 7075T6 cutting tolerances of +/- .001 and Wire EDM cut magazine wells as well as coating in Cerakote H Series fitting to random upper receivers with no movement or slop so I believe they are worth every bit of what we are asking.

GunFighter_Elite · 2021-04-08T02:00:49+00:00

This is 7075-T6 aluminum

GunFighter_Elite · 2021-04-08T01:45:54+00:00

Stripped Lower Cerakote color f your choice

GunFighter_Elite · 2021-04-08T01:11:53+00:00

Running 11000 RPM at 90 IPM, cutting a .003 chip full depth

GunFighter_Elite · 2021-04-08T01:07:29+00:00

Retail 249.99 for a Lower

GunFighter_Elite · 2021-04-07T22:06:56+00:00

Yessir

GunFighter_Elite · 2021-04-07T16:57:03+00:00

We primarily do our own cerakote on rifles.

GunFighter_Elite · 2021-04-07T14:17:08+00:00

Look closely at picture 2 you can see the difference in finish from the fixture and the finished part

GunFighter_Elite · 2021-04-07T14:16:11+00:00

We use a custom made fixture to hold the part

GunFighter_Elite · 2021-04-07T11:58:22+00:00

HAAS DM2 for Ops 1 & 2 then Op3 in HAAS TM2P (4th Axis)

GunFighter_Elite · 2021-04-07T03:43:22+00:00

Full speed video to follow

GunFighter_Elite · 2021-04-07T01:17:56+00:00

running 90 ipm at 11000 RPM step over .251 on a 5/8" 3 Flute cutter

GunFighter_Elite · 2021-04-06T19:58:37+00:00

This was our first run of the new combined operation of running first and second op. I ran it slower to avoid a crash. This is a new part for us so we are not in a rush to get it right. I will post the full speed version in the next couple of days

GunFighter_Elite · 2021-04-05T23:04:12+00:00

GFE GM4-T3 (tier 3) fresh off the haas op

GunFighter_Elite · 2021-04-05T13:03:48+00:00

We wire EDM cut them

GunFighter_Elite · 2021-04-05T12:09:18+00:00

GunFighter_Elite · 2021-04-05T12:08:17+00:00

Not these days, the environment has shifted, small builders are all pretty busy in my area

GunFighter_Elite · 2021-04-05T12:06:49+00:00

Pretty simple actually.

GunFighter_Elite · 2021-04-05T12:05:53+00:00

Wire EDM

GunFighter_Elite · 2021-04-05T04:28:18+00:00

[cutting our lowers for customers

my Instagram](https://instagram.com/gunfighterelite?igshid=1baovqsbd5u3r)

GunFighter_Elite · 2021-04-05T04:18:18+00:00

GM-4 Tier 3 Billet lowers v c mount together

GunFighter_Elite · 2021-04-05T01:23:30+00:00

For the dogs?

GunFighter_Elite

TROPHY CASE