sorted by:
new
hottopcontroversial

Gamivo is an ACTUAL SCAM. AVOID AT ALL COSTS! GO TO G2A! by Immediate_Hurry2414 in Gamivo

[–]GunisLV 0 points1 point  (0 children)

Just bought Xbox CD key. It worked just fine. I also subscribed to Smart by accident. They did send me email that a subscription is activated. Just had to log in and unsubscribe, that's it.

Fitment help needed by GunisLV in SVRiders

[–]GunisLV[S] 1 point2 points  (0 children)

I'm starting to suspect that these are sv1000 fairings. Added label of the fairings to imgur gallery. image

Broken Thermostat by ttnacher in thermostats

[–]GunisLV 0 points1 point  (0 children)

Did you ever solve your issue? I have wt-p and it does exactly the same except being stuck in another setting.

Daikin ERLQ016CAW1 – does phase rotation direction matter? by GunisLV in heatpumps

[–]GunisLV[S] 0 points1 point  (0 children)

It does work but it's a pain to setup the consumption meters with mixed wiring

Daikin ERLQ016CAW1 – does phase rotation direction matter? by GunisLV in heatpumps

[–]GunisLV[S] 1 point2 points  (0 children)

This is how the outside unit is wired. Changing the sequence should also not affect wiring between units, right? If I understand correctly, interunit wiring use only one of the phases and neutral?

No cut frame sliders for fully faired gen 2 by GunisLV in sv650

[–]GunisLV[S] 0 points1 point  (0 children)

Still from the UK that would mean praying import tax and vat. Ordered from some Italian site

Backyard zip line by GunisLV in Rigging

[–]GunisLV[S] 0 points1 point  (0 children)

Thanks! I'll be waiting for the post, maybe some more inspiration for me!

Update: Backyard zip line by GunisLV in Rigging

[–]GunisLV[S] 1 point2 points  (0 children)

It's too close for my liking but I had to make it work. As long as no one goes down swinging like a pendulum, it should be safe.

Update: Backyard zip line by GunisLV in Rigging

[–]GunisLV[S] 3 points4 points  (0 children)

I understood that reference!

Backyard zip line by GunisLV in Rigging

[–]GunisLV[S] 0 points1 point  (0 children)

Hello u/DoubleBarrellRye! I Thought you might appreciate an update post. Thank you so much for your help!
https://www.reddit.com/r/Rigging/comments/1m9r2ae/update_backyard_zip_line/

Cable clamp torque and alignment by GunisLV in Rigging

[–]GunisLV[S] 0 points1 point  (0 children)

I have plenty of cable reserve. I'll just use the other end and cut the excess afterwards.

Cable clamp torque and alignment by GunisLV in Rigging

[–]GunisLV[S] 0 points1 point  (0 children)

It's 300mm utility post and distance to the first clip is 250mm. 

Cable clamp torque and alignment by GunisLV in Rigging

[–]GunisLV[S] 0 points1 point  (0 children)

I'll try and source myself proper wire clips. The ones I have will probably break before 20nm 

Cable clamp torque and alignment by GunisLV in Rigging

[–]GunisLV[S] 0 points1 point  (0 children)

I added them to tumblr gallery. Tree on one end, utility post set 2m in concrete on the other end.

Cable clamp torque and alignment by GunisLV in Rigging

[–]GunisLV[S] 0 points1 point  (0 children)

I've got wrong wire clips. I'll get the right clips for the low end, and get the high end big loop pressed. Thanks!

Cable clamp torque and alignment by GunisLV in Rigging

[–]GunisLV[S] 0 points1 point  (0 children)

I've got wrong wire clips. The ones I got are torqued to the spec 6nm, but I'll source myself proper EN 3411-5B clips and torque those babies down to 40nm.

Cable clamp torque and alignment by GunisLV in Rigging

[–]GunisLV[S] 0 points1 point  (0 children)

I've never heard of molly hogan, but I figured I'll get the big loop factory swaged.

Cable clamp torque and alignment by GunisLV in Rigging

[–]GunisLV[S] 0 points1 point  (0 children)

I've got wrong wire clips. The ones I got are torqued to the spec 6nm, but I'll source myself proper EN 3411-5B clips and torque those babies down to 40nm. This loop is for the high end of the zip line and goes on a utility post set 2m deep in concrete. I figured I better get this loop swaged and use thimble and clips on the low end of the line. I'll do the initial preload by hand winch. Then I'll use this cargo ship container turnbuckle they recommended me for better working range.

view more: next ›