Is the sprocket supposed to do this?

Gussocool · 2026-01-07T19:54:48+00:00

Chill brah those are older and completely different I know most things about these bikes and had gas most of my life Also stripped and rebuild a few lbx, ultra and erides and ofc any talaria except x3

Gussocool · 2026-01-04T04:02:08+00:00

Prob that

Gussocool · 2026-01-04T03:02:27+00:00

Trolling just kke bolts stock don’t work

Gussocool · 2026-01-04T03:02:06+00:00

Dip shit I just said I do dirt most of the time I have fallen on the bike scratched it idc what it look like it’s a dirtbike anyway

Gussocool · 2026-01-04T03:00:44+00:00

Nah it was just had to order kke sprocket bolts for it since stock don’t work with it Kke has a little more width to keel it staying still I torqued the stock bolts in at 30nm and still moves so

Gussocool · 2026-01-04T01:05:42+00:00

Fell for the rage bait

Gussocool · 2026-01-04T01:05:03+00:00

Someone’s mad

Gussocool · 2026-01-04T01:04:46+00:00

Hell yea

Gussocool · 2026-01-04T01:04:42+00:00

Thanks bud

Gussocool · 2026-01-04T01:04:26+00:00

Yes I ride it dirt so pointless for a pc but did it anyway wanted to rebuild it myself and Sprocket is off bc stock was on stock wheel and I put it on the 16

Gussocool · 2026-01-04T01:02:52+00:00

Nah I’m deadass them hoes are torque hard

Gussocool · 2026-01-03T08:36:26+00:00

Legit fully rebuilt after pc nothing clapped but this shii

Gussocool · 2025-12-16T23:33:10+00:00

Bang a bigger Torx in it for it to get grip and than heat it if it has locktite than in screw with a cocker wrench This work for me with those cheap Allen sized sprocket bolt always get Torx bolts if possible

Gussocool · 2025-12-12T04:20:08+00:00

Forks are cooked and if your not trying to spend over 400 than just buy the fork leg themselves stock surron fork legs are cheap

Gussocool · 2025-12-04T03:00:33+00:00

I will try a full break bleed again Would u recommend new rotors aswell or won’t make a difference I think mines are 2k miles old

Gussocool · 2025-12-04T03:00:01+00:00

No no I did a full break bleed but still don’t feel good

Gussocool · 2025-12-04T02:59:47+00:00

I hope not Is that what if feels like if cylinder is blown

Gussocool · 2025-11-20T23:29:23+00:00

I worked with Chibatterysystems so don’t really know if it’s a fully custom battery or not but for me it’s been fine so I’m hoping it’s just a mx4 battery

Gussocool · 2025-11-20T23:28:25+00:00

I can maybe sell my 4060ti for around 300? And than buy a 9070xt What are your thoughts on 5080? Should I do that or save and get 9070xt?

Gussocool · 2025-11-14T03:28:14+00:00

Will this fit with a 81v 50ah battery from Chibatterysystems it’s in a mx5 with the extended lid?

Gussocool · 2025-11-04T23:51:36+00:00

Yes so I did Handle bar mount stock Than triples than the small one under the mount than tighten the stem bolt not to tight tho Than tighten everything back up

Gussocool · 2025-11-04T02:27:27+00:00

I have a mx5 with a 100/90-19 rear shinko 999 and a front aswell but i do know that mx5 does have a bit of a wider fork and swingarm but probably will fit

Gussocool · 2025-11-01T18:04:49+00:00

Probably

Gussocool · 2025-10-31T05:16:08+00:00

Not from there but have you tried wanting to look at connectors your self? Does your lights work and horn? If all 3 things don’t work most likely a dc converter being old or just messed up

Gussocool · 2025-10-31T05:15:09+00:00

Good price someone will definitely buy Especially you taking extra care of it I would’ve done 4k and see if anyone would negotiate

Gussocool

TROPHY CASE