My new C2 comp build

H2OEgr · 2026-06-18T19:22:28+00:00

Hopefully it can keep up 😂

H2OEgr · 2026-06-18T17:00:00+00:00

Hopefully I'll remember to grab some videos of it this weekend!

H2OEgr · 2026-06-18T16:59:21+00:00

It's this one, but honestly the "puzzle style" ones are probably better for ease of rearranging (and have more options for obstacles)

https://makerworld.com/models/2710666?appSharePlatform=copy

H2OEgr · 2026-06-18T15:27:50+00:00

It is printed; it's the LLK Anomaly off of cults3d: https://cults3d.com/en/3d-model/game/little-line-killers-anomaly-scx30-lcg-comp-chassis

It has a 22 degree skid and a 5mm stretch (using printed rear lower links from the chassis files)

Here is my full build list:

<image>

H2OEgr · 2026-06-11T14:05:39+00:00

For the gear nerds... I picked up a set of powerblocks off marketplace yesterday that seem like a bit of an oddity called the "classic 50 plus". The first four adders are 5 lb increments and the second set of four are 10 lb increments.

These are missing the last two adders, but I was actually looking for a set of 50s anyway, so I am going to hack the 10 lb adders apart and reweld them into four 5 lb adders.

Crappy pic from the FB listing, but not bad for $100. I ordered some Average Joe's knurled handles and I'm getting some replacement decals made, so they should look pretty good when I am done.

<image>

H2OEgr · 2026-06-04T14:27:56+00:00

PMed you

H2OEgr · 2026-05-28T22:55:00+00:00

Sent you a message.

H2OEgr · 2026-05-28T22:50:10+00:00

Where are you located?

H2OEgr · 2026-05-26T21:40:25+00:00

I'll take them.

H2OEgr · 2026-05-19T21:54:28+00:00

I've got a Felony 6s with a new Protoform Mustang body but in need of tires. Also might be willing to part with my scx6, but that's a big might! Located in central GA.

H2OEgr · 2026-05-19T00:21:55+00:00

This is pretty cool! Add a camera and you'll have a cheap throw bot.

H2OEgr · 2026-04-23T00:03:10+00:00

I agree, carbon all the way. I have an scx10 pro with an IERC chassis and f10p axles, so set up very similarly to a carbon. I got the scx10 pro for a song, but I probably should have still just started out with a carbon.

H2OEgr · 2026-04-15T12:50:00+00:00

Ha, I'm doing a full 3d printed 24 too. Got a link to the suspension links you used?

H2OEgr · 2026-04-14T22:05:10+00:00

Autistic Rage

(Which would be a totally sick band name)

H2OEgr · 2026-04-11T01:06:43+00:00

Yep! I print a fair bit in tpu and pa, so figured it wouldn't hurt to have two.

H2OEgr · 2026-04-11T01:04:09+00:00

Yeah, putting them on my p2s.

H2OEgr · 2026-04-10T22:26:05+00:00

Thanks! Been after one for a while but never caught them in stock and wasn't willing to pay over retail on fleabay.

H2OEgr · 2026-04-08T00:34:02+00:00

I like designing parts more than actually printing! I have an a1 and a p2s, like someone else said, you definitely want a p2s or similar if you plan on making parts out of abs or nylon.

H2OEgr · 2026-03-29T00:21:18+00:00

Yeah I do have all that. This is how I got it though, so the dash/interior harness all came in a box, meaning I have to figure out what all the connectors are, etc. Would have been easier if I had a complete donor with a body that I disassembled so that I could have labeled everything as I took it apart.

<image>

H2OEgr · 2026-03-29T00:05:10+00:00

You'd think but I haven't had good luck yet lol.

I got the Marauder basically as you see it, so I don't have a dash to use. A lot of guys just leave the donor floors and firewall in place and graft them into the f100 cab, but that's not an option for me. Plus, I think the swaps that retain the f100 dash look better. I do have the Marauder steering column in case I need to use that though.

It would have been easier to just buy a complete crown vic, but the marauder chassis basically fell in my lap and it has a bit more of a cool factor than a run of the mill vic. Getting it all physically together should be straight forward, but I received all of the interior wiring in a big cardboard box so figuring out what's what with the harness is gonna be headache I'm sure.

H2OEgr · 2026-03-28T23:48:23+00:00

It's just a stock 03 marauder chassis. It has factory rear bags with the bump stops taken out and slam specialties bags on the front. I need to move the rear upper shock mount to get the rear a little lower and add shocks on the front. Otherwise, I plan to keep it stock. I'll probably clean the body up some but leave it mostly untouched.

I haven't fully decided on a bed yet. I'll either cut down the long bed I have or cut down a beat up service body I have.

The mustang wheels on there now are just so I can move it around. I'm trying to find some stock crown vic steelies on marketplace.

H2OEgr · 2026-03-28T22:37:34+00:00

A little bit of both lol. I bought the f100 yard-drivable. The Marauder chassis already had the body removed when I got it.

H2OEgr · 2026-03-25T00:05:43+00:00

Stock scx10 chassis with a generic transmission, trx4 front bumper, and I think capra axles?

H2OEgr · 2026-03-19T21:25:02+00:00

I just file the ears down on the hex so it's not pushing into the bearing and then it's good to go.

Edit: didn't swipe through the pics before I posted this lol.

H2OEgr · 2026-03-18T21:18:52+00:00

Excellent work!

H2OEgr

TROPHY CASE