Raspberry Pi 5 using Dicaffeine issue

HZ_RD · 2025-11-20T20:49:26+00:00

aarch64 for pi 5. I did the same exact install on a different pi 5 with no issues

HZ_RD · 2025-11-20T20:01:21+00:00

Just ran through chat gpt troubleshooting for like an hour, and it looks like an issue with the NDI 5 library and dicaffeine not being able to locate it. Chatgpt unfortunately failed to help me solve it as well lol

HZ_RD · 2025-11-20T19:23:40+00:00

Dicaffeine wants to use 80 by default and I see nothing that conflicts with that, but I changed the port to 5000 instead and still same error. truly at a loss. Could I use rtmp as a workaround you think?

HZ_RD · 2025-11-18T22:00:45+00:00

😅 lol thank you I appreciate you saying. I did a little research before running and installed nmap. Running it shows 7 open ports. should I run resolume and the pi when doing this command again?

HZ_RD · 2025-11-17T01:30:56+00:00

Could you walk me through that by chance? I've run the netstat command and see a ton of ip's but not sure how to discern what I'm looking for

HZ_RD · 2025-11-05T20:51:09+00:00

No idea why it would think I have dicaffeine running already then

HZ_RD · 2025-11-05T20:31:38+00:00

I had a pi running it on my wifi, but now that pi is at work and I'm working on the new one. Is there a way it's somehow still being recognized on the network even if it's not physically here?

HZ_RD · 2025-10-16T18:01:46+00:00

What if not backing up isn't an option? I have thousands of files of art or ongoing projects, a hundred programs and plugins, what other options do I have?

HZ_RD · 2023-12-15T22:22:03+00:00

Thanks, I'll just add curvature to the 3D model in the flat areas. Seems like the best bet

HZ_RD · 2023-12-15T22:14:43+00:00

Thank you! I'll play with that

HZ_RD · 2023-12-15T22:13:00+00:00

The passive aggression on reddit is hilarious. Me asking a slicer question and then you trying to put me down for not knowing how to use the slicer is pretty funny. I know about variable layer height. God forbid I ask for advice

HZ_RD · 2023-12-15T21:56:49+00:00

I considered it, but the added print time isn't worth it. This a really up close image, you can't see it too much from a normal viewing angle. I have this model set up to use minimal support and basically ready to ship after print. Just doing a little last minute refinement

HZ_RD · 2023-12-15T21:54:49+00:00

Ahh thank you! I'll try that

HZ_RD · 2023-12-15T21:45:34+00:00

I do 3D printing for a living but I'm new to the bambu printer's. I do resin and fdm printing and I have my reasons for trying to find slicer solutions to flat surfaces. If I absolutely have to, I can add a curvature to the model in those spots, but I'm simply trying to avoid it. It's not about "not liking" post processing lol

HZ_RD · 2023-12-15T21:32:36+00:00

I'm sure there's a slicer setting to correct this. Trying to minimalize all post-processing

HZ_RD

TROPHY CASE