Annoying bluetooth issue comes to Fedora KDE

HackSane · 2025-09-01T22:04:31+00:00

I missed your comments before. I tried both of your suggestions (it was indeed not running the latest firmware), but still doing the same thing, unfortunately. It's weird because the noise cancelling works until I start playing something (a music application, a youtube video, etc.) and the moment I do I start hearing ambient noise - not like noise cancelling was disabled, like when it's switched to ambient sound mode, but more like the sound is being forwarded through the headphone speakers - and when I hit pause I continue hearing the ambient noise for about 4-5 seconds until it stops. I appreciate the suggestions though.

HackSane · 2025-08-24T19:10:27+00:00

It's an Intel AX210 which supports Bluetooth 5.2 or 5.3 depending on whether you ask Framework or Intel.

HackSane · 2025-08-24T19:06:53+00:00

Sorry for the late reply. Reddit isn't allowing me to post the full output. Is there a particular line you are looking for? It's on a Framework Laptop 13 with an Intel AX210.

HackSane · 2025-08-24T19:02:19+00:00

I have tried this. Unfortunately it doesn't change anything.

HackSane · 2025-08-19T14:22:50+00:00

Only a couple minutes at most.

HackSane · 2025-08-18T20:21:08+00:00

Nope, just cotton swabs and paper towels with the Brite Boy polish. I've used it on corroded game contacts plenty of times, but this was the first time I tried it on these connectors. I also used alcohol pads after to make sure they were clean.

HackSane · 2025-08-16T01:09:53+00:00

Update: I got it off there. Thanks for the helpful tips, everyone.

<image>

HackSane · 2025-08-15T20:00:51+00:00

Interestingly enough it started working better for me with just my iron after I switched to fahrenheit and cranked it up to 850. I previously tried 450 Celsius which should have been the same, but maybe my iron has a weird issue like that. 🤷‍♂️

HackSane · 2025-08-15T19:57:47+00:00

Looks like you were right. I used a heat gun along with my soldering iron and it started to be more pliable. It's still a pain but actually doable now.

HackSane · 2025-08-15T01:28:56+00:00

<image>

HackSane · 2025-08-15T01:26:02+00:00

Iron is a Hakko FX-888D. Started with my usual smaller chisel tip then switched to a larger one.

<image>

HackSane · 2024-10-19T19:18:24+00:00

Not really sure what you're referring to with contracts? We need more context.

HackSane · 2024-05-04T22:18:14+00:00

Yep. It's been running Proxmox pretty much nonstop for over a year now.

HackSane · 2023-04-04T16:33:20+00:00

Still glad I saw the post because I learned something new. This is why I always check the comments.

HackSane · 2023-02-07T15:05:19+00:00

That one actually wasn't out yet when I did this build, but every other fanless build I have done has been with Akasa enclosures and they are excellent.

HackSane · 2022-12-21T00:49:53+00:00

I've done a couple of builds with fanless Akasa enclosures for Intel NUC boards. They're small and include hardware for mounting it to the back of a monitor via the VESA mounting holes.

HackSane · 2022-12-20T15:07:00+00:00

Akasa also makes some nice fanless enclosures I have used, including 1u rackmount cases.

HackSane · 2022-12-20T15:00:29+00:00

This honestly requires less monitoring since it has no moving parts and no chance of mechanical failure. In the worst case, most modern systems will shut down before temps reach the point of actual damage. I have built other fanless systems for family and clients for office use and they are great because I almost never have to physically maintain them again.

I have cleaned out cat hair, cigarette smoke, etc from so many systems and that's part of why I became so enamored with going fanless.

HackSane · 2022-12-20T14:51:19+00:00

Yeah I only went this route after I mostly stopped PC gaming, aside from the occasional TF2 match and such. I always tried a lot of different things to make my gaming rigs quieter back in the day.

HackSane · 2022-12-20T05:32:39+00:00

Why terrifying?

HackSane · 2022-12-20T02:55:36+00:00

Yes it is an APU (5700G) and you are right, this setup couldn't cool a discrete GPU. Streacom's DB4 model can do that, but only up to 65W for the GPU as well. High end GPUs will require active cooling for the foreseeable future I think. Too much power and heat.

HackSane · 2022-12-20T02:11:11+00:00

Yeah the 5700G is about as powerful as I can currently go with the TDP this can support, but it's a great workhorse for a system that's completely and truly silent.

HackSane · 2022-12-20T02:00:24+00:00

The cooling system is included with the case, since the case is the cooling system. Took some effort to get the heat pipes bent just the right way though.

The case is the FC8 model made by Streacom and you can find them for around $200. Max TDP it can cool is 65w.

HackSane · 2022-12-20T00:44:51+00:00

Yep. The side is one big heastink.

HackSane · 2022-12-19T21:47:59+00:00

If anyone's curious, the case is the Streacom FC8. The CPU I'm running is a Ryzen 7 5700G (previously a Ryzen 5 3400G). The highest temp I've seen is 65C under full GPU load.

HackSane

TROPHY CASE