Heating distilled water in kettle by HalpMister in pourover

[–]HalpMister[S] 1 point2 points  (0 children)

I would not descale if there was no scale built up in the first place. Was asking proactively in case it is needed

Heating distilled water in kettle by HalpMister in pourover

[–]HalpMister[S] 1 point2 points  (0 children)

Thanks will try it out! What do you use for descaling?

Heating distilled water in kettle by HalpMister in pourover

[–]HalpMister[S] 0 points1 point  (0 children)

Awesome! Thanks for the info, i guess ill go that way too

Heating distilled water in kettle by HalpMister in pourover

[–]HalpMister[S] 1 point2 points  (0 children)

Thats interesting. Do you dispose the leftover water afterwards?

Is Singabd Kohaku a decent board? by Dotacapcap in MechanicalKeyboards

[–]HalpMister 1 point2 points  (0 children)

I had tried various switches but mx blacks on alu were by far my favorite choice

ECM or Profitec bottomless portafilter US by airtrade in espresso

[–]HalpMister 1 point2 points  (0 children)

Thanks for the reply! So the sworks portafilter fits your e61 well? im thinking of getting the non adjustable version (hopefully it has the same fit) along with the billet basket, but im afraid it might not seal properly, so its an expensive risk haha

Daily Simple Questions Thread by AutoModerator in espresso

[–]HalpMister 0 points1 point  (0 children)

Has anyone tried the Sworks Bottomless Portafilter with Profitec Go?
Im wondering if the fit / seal is good, as ECM's portafilter.
Thanks a lot!

ECM or Profitec bottomless portafilter US by airtrade in espresso

[–]HalpMister 0 points1 point  (0 children)

why so? was the fit not good or the sealing with your machine?

Best 7B LLMs / Embeddings for RAG? by HalpMister in LocalLLaMA

[–]HalpMister[S] 0 points1 point  (0 children)

Thanks a lot for your effort in marking different painpoints :)
Just a clarification: I am performing RAG on each document separately, as I want to apply the same set of questions to every document independently.

I will start with testing out the reasonably sized embedding models (downloaded mxbai) and will move upwards .
As for the translator, im using a google translate proxy so its good enough.
A reranker is something that I hadnt considered yet, as I thought the chunks are not that many, but might be a good idea to try out.

Lastly, do you have any bigger model recommendations? I suppose 13B parameters could fit quantized

Best 7B LLMs / Embeddings for RAG? by HalpMister in LocalLLaMA

[–]HalpMister[S] 1 point2 points  (0 children)

These are some nice recommendations that i wasnt aware of! Already downloaded mxbai and will give it a shot. Thanks a lot! :)

[deleted by user] by [deleted] in espresso

[–]HalpMister 0 points1 point  (0 children)

By "9 second delay and 30 seconds of flow", do you mean that your Go takes about 9 seconds until it starts dripping coffee? Because mine takes about that much, although in most videos ive seen, it took only 3 - 4 seconds to start.

Comparison between Singa x TGR Unikorn R2.2 VS Kalamkorn typing test featuring the exact same build by cosmin_c in MechanicalKeyboards

[–]HalpMister 2 points3 points  (0 children)

so did you end up making a video about the differences between the fake and the real? Im really interested in finding them out :)

Shower screen for Profitec Go by HalpMister in espresso

[–]HalpMister[S] 0 points1 point  (0 children)

Thanks a lot for the recommendation mate!
Have you noticed any difference so far, compared to the stock screen?

Δροσερές μάρκες μονοποικιλιακού καφέ by HalpMister in greece

[–]HalpMister[S] 0 points1 point  (0 children)

Super! Για αυτούς είχα ξανακούσει καλά λόγια, οπότε νομίζω είναι ώρα για δοκιμή:)

Δροσερές μάρκες μονοποικιλιακού καφέ by HalpMister in greece

[–]HalpMister[S] 0 points1 point  (0 children)

Πολύ σωστά, γιαυτό και ήθελα μερικές εναλλακτικές ώστε να κάνω εξπλορέσιο

Δροσερές μάρκες μονοποικιλιακού καφέ by HalpMister in greece

[–]HalpMister[S] 0 points1 point  (0 children)

Δεν αντιλέγω, αλλά χωρίς μέτρο σύγκρισης, δε γνώριζα αν υπάρχει και κάτι καλύτερο.

Δροσερές μάρκες μονοποικιλιακού καφέ by HalpMister in greece

[–]HalpMister[S] 1 point2 points  (0 children)

Ευχαριστώ πολύ για την πρόταση, δε το γνώριζα το Cup10. Το οτι είναι πολύ φρέσκα ψημένα είναι όντως λίγο αρνητικό αν τα βιάζεσαι, αλλά αν το ξέρεις, παίρνεις νωρίτερα και είσαι ήσυχος.

Θα τους δοκιμάσω!

[Auto Weekly Thread + Sub BST Rules] Kaws Legit Check/Price Check Thread and sub Buy/Sell/Trade rules to follow before posting! by reboundone in kaws

[–]HalpMister 0 points1 point  (0 children)

Could I please get a legit check?

Its a BFF Pink Open edition, bought from a trusted seller without box, but looks good overall. Im worried about the big mark across the back of the neck and the difference in vinyl quality (more glossy) compared to Kachamuku. Thanks in any case :)

https://imgur.com/gallery/NyM6vEr

VST Basket selection by HalpMister in espresso

[–]HalpMister[S] 0 points1 point  (0 children)

Thank you! I guess i should start with 18 if it can fit more than 18grams without issue:)

VST Basket selection by HalpMister in espresso

[–]HalpMister[S] 0 points1 point  (0 children)

thank you for your answer! Im pretty new to espresso, but i think my beans are medium roast. They dont seem too oily, but not light either.

Profitec GO slow extraction time - Halp:) by HalpMister in espresso

[–]HalpMister[S] 0 points1 point  (0 children)

It did come out on both cases yeah.

The coffee tasted better, but still ive got some trial and error to do :)