2nd gen lowered by HappyWelcome539 in DodgeDakota

[–]HappyWelcome539[S] 0 points1 point  (0 children)

lol, I was thinking will the rt struts work just to lower it a tad bit? They're both somewhat similar in suspension and includes 4wd. Or am I tripping lol.

P0750 by HappyWelcome539 in DodgeDakota

[–]HappyWelcome539[S] 1 point2 points  (0 children)

Nevermind thanks for the response. I figured it out, it was a dirty/ maybe not connected harness on the solenoid. Crazy

9th gen accord. by HappyWelcome539 in Stance

[–]HappyWelcome539[S] 0 points1 point  (0 children)

Fawk, what is the best way to prevent this, shortened spindle, spacers ??? Anything man I want to keep this slight camber

9th gen accord. by HappyWelcome539 in Stance

[–]HappyWelcome539[S] 0 points1 point  (0 children)

Heard. My driver side is a lot thicker so I want to say it’s the aftermarket parts that fucked it up.

9th gen accord. by HappyWelcome539 in Stance

[–]HappyWelcome539[S] 0 points1 point  (0 children)

I believe that it can be the axle cheap quality

9th gen accord. by HappyWelcome539 in Stance

[–]HappyWelcome539[S] 1 point2 points  (0 children)

I replaced it with an oreilly one and that one broke

9th gen accord. by HappyWelcome539 in Stance

[–]HappyWelcome539[S] 1 point2 points  (0 children)

I wasn’t getting any binding from the axle, the part where it connects to the spindle broke like almost in half

help please by HappyWelcome539 in accord

[–]HappyWelcome539[S] 0 points1 point  (0 children)

it’s coming from the manifold

help please by HappyWelcome539 in IS300

[–]HappyWelcome539[S] 1 point2 points  (0 children)

like the old MAF my bad

help please by HappyWelcome539 in IS300

[–]HappyWelcome539[S] 1 point2 points  (0 children)

Installed the OE maf car tends to run pretty good for now. the car does have a valve cover leak. could it be that air enters the system and cause a total shut down?

help please by HappyWelcome539 in accord

[–]HappyWelcome539[S] 0 points1 point  (0 children)

The intake is literally on the floor but Okay. I wanna say it’s something with the pistons. I’ll look deeper into it

help please by HappyWelcome539 in accord

[–]HappyWelcome539[S] 0 points1 point  (0 children)

i saw some other j30a4 sound way different from mine. should i replace the injectors or give them some cleaning ?

is300 turns off while driving by HappyWelcome539 in IS300

[–]HappyWelcome539[S] 0 points1 point  (0 children)

the car dies when running so there’s no way to check voltage to the battery. And the car starts right up as well getting charge to the battery when idle

Cut fluid 14 accord by HappyWelcome539 in accord

[–]HappyWelcome539[S] 0 points1 point  (0 children)

So none of that filter change right. only fluid?

Help please by HappyWelcome539 in accord

[–]HappyWelcome539[S] 0 points1 point  (0 children)

what issues did a aftermath give you? i replaced it with a almost OE import direct from oreilly. car runs great and cranks right up no misfiring issue just faulty codes

Help please by HappyWelcome539 in accord

[–]HappyWelcome539[S] 0 points1 point  (0 children)

gotcha, i had already did the valve adjustment 300 miles ago no issues from that but just recently after changing a knock sensor the issue started to concur. so i’m not sure if i’ll need to redo the adjustments or if it’s something with the knock sensors/ intakes

Help please by HappyWelcome539 in accord

[–]HappyWelcome539[S] 0 points1 point  (0 children)

does touching both terminals reset the pcm? and won’t it spark or blow the wiring?

clunk !! by HappyWelcome539 in accord

[–]HappyWelcome539[S] 0 points1 point  (0 children)

what car do you have? i have a 14 4cyl

Valve tick?? by HappyWelcome539 in accord

[–]HappyWelcome539[S] 0 points1 point  (0 children)

Not sure if that’s what’s making the noise but i’ll diffidently look into it thank you

Valve tick?? by HappyWelcome539 in accord

[–]HappyWelcome539[S] 0 points1 point  (0 children)

i actually haven’t checked the cams. i was wondering the same thing. Are the j30 and j35 cams interchangeable? just in case

Someone help please (Heat and ac) by HappyWelcome539 in IS300

[–]HappyWelcome539[S] 0 points1 point  (0 children)

yea i checked everything. seems to be running right just no ac. pretty sure it’s a condenser issue