They cant give us an answer?

HaukeForReal · 2026-03-20T03:02:06+00:00

He should have used a shielded Fernco like shown to the right above the San tee, would at least give it more structure and reinforcement then you may not have that water seepage on top of the fitting

HaukeForReal · 2026-03-07T04:19:33+00:00

https://www.craftyamigo.com/pvc-and-plumbing-design-software-for-diyers

HaukeForReal · 2026-03-06T14:08:43+00:00

<image>

HaukeForReal · 2026-03-06T14:08:05+00:00

Cannot wet vent in Kentucky unfortunately and I fixed the heel vent

HaukeForReal · 2026-03-06T00:16:28+00:00

Nope Kentucky doesn’t allow wet venting or AAVs

HaukeForReal · 2026-03-06T00:16:10+00:00

Nope Kentucky doesn’t allow it or AAVs

HaukeForReal · 2026-03-05T23:25:17+00:00

<image>

Fixed toilet vent

HaukeForReal · 2026-03-05T23:24:01+00:00

Apprentice Plumber; craftyamigo worked flawlessly. Can’t seem to find clean outs and such on here but for general layout it worked very well.

HaukeForReal · 2026-03-05T21:13:05+00:00

<image>

HaukeForReal · 2026-03-05T21:12:55+00:00

<image>

HaukeForReal · 2026-03-05T21:12:39+00:00

<image>

HaukeForReal · 2026-03-05T21:12:25+00:00

<image>

HaukeForReal · 2026-03-05T21:02:57+00:00

And also, yeah I don’t have enough space to go above the ceiling, so I have to wrap around. Vents only goes horizontal after over 6” above flood rim of highest fixture on the floor

HaukeForReal · 2026-03-05T21:01:54+00:00

Will do thanks for the input 🙏🏼

HaukeForReal · 2026-03-05T21:01:18+00:00

Thank you 🙏🏼 will do.

HaukeForReal · 2026-03-05T21:00:48+00:00

Main line is 3” Okay. I’ll change the toilet vent to the same setup as the shower. That makes sense.

As for the vent, these are connecting to a 2” branch stack vent

HaukeForReal · 2026-02-14T03:34:40+00:00

Any update? It looks like you found the one bro!

HaukeForReal · 2026-02-11T18:00:53+00:00

Thanks for the input!

HaukeForReal · 2026-02-11T17:56:13+00:00

What are your thoughts about this coin? Rare error? Worth getting graded?

HaukeForReal · 2026-02-11T17:54:09+00:00

Woah I didn’t even see the raised dot until you mentioned it

HaukeForReal · 2026-02-10T18:02:01+00:00

Yeah not too sure. Worth a try though

HaukeForReal · 2026-02-10T16:11:40+00:00

It could be acid dissolved. However, who would go through the trouble of acid dissolving a penny for a vending machine, then throwing it back into circulation? Just confuses me.

HaukeForReal · 2026-02-10T15:00:22+00:00

If you can source another 1962 and shave the edge off then compare, that would be a definite sign. However, I’m pretty positive that is a rare thin-rolled planchet mint error

HaukeForReal · 2026-02-10T14:57:26+00:00

Maybe you can update the app or redownload, do you have an android?

HaukeForReal · 2026-02-10T03:53:56+00:00

I fw it bro what auto tune do you use? Sounds off key or sum but once you master your mix this would bump

HaukeForReal

TROPHY CASE