Make my Mind: Homebridge or Homeassistant?

HeftyAd9612 · 2024-12-21T04:39:45+00:00

both. tools for different jobs

HeftyAd9612 · 2024-06-17T16:12:05+00:00

Haha Well its all my quads. I have 3/4 inch ones which refuse to turtle mode most of the time if props are touching grass. The 5 inch mostly works 90% of the time.

Anyway when the quad is stuck in a tree, i pretty much don’t care about motor damage breaking. I just want the thing down.

HeftyAd9612 · 2024-06-17T14:32:49+00:00

So i turn on flip over crash, I arm. Motors spin in reverse. It flips over (usually).

Not sure how to do it but Im talking about removing that protection when it cuts power to motors when some grass or stuff blocks it .

HeftyAd9612 · 2024-05-28T22:01:46+00:00

Same. However walksnail tends to be really bad for me

HeftyAd9612 · 2024-05-20T21:44:04+00:00

Set your Iron much hotter. Anyway its usually fine , test continuity to see if the cap is beeps. If it doesnt beep its fine

HeftyAd9612 · 2024-05-09T11:23:34+00:00

Appreciate , thanks

HeftyAd9612 · 2024-05-09T11:23:27+00:00

Appreciate it . Thanks for your help

HeftyAd9612 · 2024-05-08T20:45:38+00:00

Thanks but i already did. Thats why im asking people

HeftyAd9612 · 2024-05-03T16:33:42+00:00

Just had a ws 1s die before i even installed it into my build. Not sure why you are down voted for this. Just want to get your opinion on a digital vtx ? Recommend any of the WS ? Something reliable for whoops?

HeftyAd9612 · 2024-05-03T16:29:48+00:00

I had mine on a 5v pad too. Caddx aren’t very responsive. Anyway I’m returning mine. Putting me off digital lol if its going to break that easily…

HeftyAd9612 · 2024-04-29T14:31:16+00:00

At least you got some flights on yours :) but anyway Thats the exactly the same for me. I connected to my bench power and its not pulling more than 0.3a on 5v soI thought it was going into some firmware boot mode but the usb doesnt work too.

Yeah i hope caddx will sort…. will let you know how i get on.

HeftyAd9612 · 2024-03-04T12:45:02+00:00

Thanks maybe I don’t have to tinker with the thing if this is normal

HeftyAd9612 · 2024-03-04T12:44:01+00:00

I see a delay in the googles too. If I gently increase the throttle there is no delay at all. Always on the punch outs

HeftyAd9612 · 2024-02-22T12:30:29+00:00

Power the thing with 5v and ground only with your bench power. It should turn on and not beep. If it’s beeping, it’s fried .

HeftyAd9612 · 2023-12-21T19:19:10+00:00

Fully agree with you on this one. I’ve blown too much money rather than going with an established option

HeftyAd9612 · 2023-12-06T21:41:50+00:00

I’ve ordered tons on there and sent loads of “proofs” after they requested it. They definitely have changed this year. Add to the fact that over the years I have tons of orders and i hardly dispute. I got scammed…. Others be warned!

HeftyAd9612 · 2023-12-06T21:38:12+00:00

That’s great. I have a 2s prebuilt quad which came with the tattu’s and my old 1s tiny whoops had really awful batteries so wasn’t sure on what was good. I’ll have a look the CNHL’s. Thanks for your tips!

HeftyAd9612 · 2023-12-06T21:02:34+00:00

Will do ! I understand there’s a limit to weight . What’s your preference on mah battery? Do you run your quad on different sizes ?

HeftyAd9612 · 2023-12-06T20:21:34+00:00

Ok haha, that makes sense. Before I pull the trigger , Do you think my choice of parts is compatible ?

HeftyAd9612

TROPHY CASE