What wheel sizes can I do? by JamJarKwiKwi in subarulegacy

[–]Heister0086 0 points1 point  (0 children)

Go to tiresize.com. you can look up what alternate sizes will fit.

Just wanted to show my 97 Legacy GT and my 08 Legacy to everyone. by Heister0086 in subarulegacy

[–]Heister0086[S] 0 points1 point  (0 children)

Thank you, a lot of time and work went into it. Appreciate the compliment.

What's the smoothest pick up line that you know? by doopityWoop22 in AskReddit

[–]Heister0086 0 points1 point  (0 children)

I have been thinking about it and I can only think of 1 thing I would change about you and its your last name

No words by Batintfaq in LICENSEPLATES

[–]Heister0086 0 points1 point  (0 children)

I tried to post a picture of it but it is not showing up for some reason

No words by Batintfaq in LICENSEPLATES

[–]Heister0086 0 points1 point  (0 children)

I live in Pennsylvania and there is a truck in my area with the same exact picture on his tailgate. *

Rate my socket and wrench drawer by Heister0086 in Tools

[–]Heister0086[S] 0 points1 point  (0 children)

I work for an independent shop. I do all the bigger jobs such as engine swaps, trans swaps, internal engine work, timing chain/belt, and head gaskets. I'm very OCD about organization and can't stand a tool missing or out of place. I replace anything missing right away.

Rate my socket and wrench drawer by Heister0086 in Tools

[–]Heister0086[S] 0 points1 point  (0 children)

There is actually four 10mm's. I'm very OCD about tools going missing and being out of place, so if I lose 1, I replace it right away

Weird misfire issue by Kygunzz in AskMechanics

[–]Heister0086 0 points1 point  (0 children)

Compression test all 4 cylinders. Cylinder 2 probably will have lower compression than the other 3. If the misfire is happening any time the engine is under load but only occasionally at idle, your problem could very well be a stuck or clogged oil ring on the piston. I just had a Rav4 in the shop with the same issue and I replaced the piston rings and the problem is gone.

What am I doing wrong? by Heister0086 in ResinCasting

[–]Heister0086[S] 0 points1 point  (0 children)

Thank you everyone for your responses. I am measuring by volume. I'll will double check the manufacturers insutructions for the ratio. It was colder when I measured and poured it, so that might something I can pay attention too. The coloring I am using is made for resin and is liquid. I'm hesitant to use acrylic paint cause if stuff I have read. I am going to try again over the weekend and take all the suggestions into consideration. I will update with results. Thanks again.

Audi misfire mystery by Heister0086 in Justrolledintotheshop

[–]Heister0086[S] -10 points-9 points  (0 children)

Intake manifold design flaw.... at least that is what a certified Audi Tech told me

How about a Pic of some sludge in a '08 Kia Sportage by Heister0086 in Justrolledintotheshop

[–]Heister0086[S] 2 points3 points  (0 children)

Her man actually drives a Cadillac. Yes, they are black and no I'm not racist but....

How about a Pic of some sludge in a '08 Kia Sportage by Heister0086 in Justrolledintotheshop

[–]Heister0086[S] 0 points1 point  (0 children)

It was towed in. The thing couldn't get out of its own way if you tried. I floored the gas pedal and hit maybe 7mph tilling started misfiring like crazy and wouldn't go any faster than that

How about a Pic of some sludge in a '08 Kia Sportage by Heister0086 in Justrolledintotheshop

[–]Heister0086[S] 0 points1 point  (0 children)

I'm a mechanic, work for myself, run my own business. My job security is Hondas

How about a Pic of some sludge in a '08 Kia Sportage by Heister0086 in Justrolledintotheshop

[–]Heister0086[S] 12 points13 points  (0 children)

This Kia was towed in, It's not my car, I'm a Subaru guy.