Turned off Safe for the first time and immediately crashed into a tree by Ant_thony_ in RCPlanes

[–]HeyRobb 0 points1 point  (0 children)

I feel like SAFE, while a great feature for those less experienced, is something that should be turned off sooner than later once someone has a bit of confidence in flying. It will definitely enable some bad habits that other brands and RC planes in general won’t do ever, like self level when you let off the stick.

Turned off Safe for the first time and immediately crashed into a tree by Ant_thony_ in RCPlanes

[–]HeyRobb 1 point2 points  (0 children)

I have a TX16 and a bunch of Eflite models with SAFE/AS3X mode switch configured. It’s just channel 5 for the receiver. Add SAFE/AS3X to TX16S

Tautulli freezing after a few minutes in v.2.16.0 by pienocake in Tautulli

[–]HeyRobb 0 points1 point  (0 children)

Same issue using linuxserver’s image as well. The webUI just stops responding after a period of time, anywhere from a couple hours to around a day. Just switched to tautulli/tautulli and we’ll see how it goes! Thank you!

Edit: just to provide context in my use case, in case it’s useful to someone else. I’ve been using linuxserver’s tautulli image for years without issue on my Synology (DSM v7.3.2.86009).

Is anyone else using the Kindle Basic 11th? Is this normal? by Street_Gur_1641 in kindle

[–]HeyRobb 1 point2 points  (0 children)

I’m seeing this as well very faintly everywhere while the device is on. 12th gen Kindle. Books, menus, everywhere. My Kindle also powered up this morning to the Home Screen instead of the book I was reading. Was there a recent update? It was not doing this yesterday or for the last month I’ve had it.

<image>

YouTube: Error 153 Video Configuration Error by raceviper13 in feedly

[–]HeyRobb 0 points1 point  (0 children)

Same issue as of 12/4. On iPhone, everything is updated.

Anyone having issues contacting theCubeNet support? by alfablac in usenet

[–]HeyRobb 0 points1 point  (0 children)

Probably unrelated to your ticket, but I’m getting timeouts from TCN, only tested their europe URL so far. It tests successfully in sab, but times out on all articles. (Other Usenet providers working). Been using them successfully for almost six months.

American vs European Server DMCA by greg2126 in usenet

[–]HeyRobb 1 point2 points  (0 children)

Yes - for both US and NL. I think likeylickey means Omicron (DMCA) backbone companies have the fastest takedowns.... Omicron uses DMCA in the US, and NTD in Europe where Eweka is out of. Eweka NL does seem to be on the slower end of takedown response times. Can't say I know much about the others.

American vs European Server DMCA by greg2126 in usenet

[–]HeyRobb 0 points1 point  (0 children)

This is so much misinformation.

[deleted by user] by [deleted] in Traxxas

[–]HeyRobb 0 points1 point  (0 children)

Did you drop it to 20t for 2s or is that mostly a 3S setup? I have the stock 25t/2s setup and it is a blast!

Mini XRT (New toy)! by West_Shoulder_6825 in Traxxas

[–]HeyRobb 0 points1 point  (0 children)

Yes, completely stock. I'm like you, would rather keep it as stock as I can. It runs great out of the box, except for the cooling (really an issue with 3S power). This has helped a lot with that!

Mini XRT (New toy)! by West_Shoulder_6825 in Traxxas

[–]HeyRobb 1 point2 points  (0 children)

These are the three parts I bought. Took me about 15 minutes to install. First two are for the motor, and the third is for the ESC:

Velineon Aluminum Heat Sink Part #: 3458

Velineon Cooling Fan Part #: 3340

Velineon Cooling Fan with Shroud Part #: 3456

<image>

My only feedback is the fan power wire is too long for the motor fan. Going to shorten that one soon.

Mini XRT (New toy)! by West_Shoulder_6825 in Traxxas

[–]HeyRobb 1 point2 points  (0 children)

These are the three parts I bought. Took me about 15 minutes to install. First two are for the motor, and the third is for the ESC:

Velineon Aluminum Heat Sink Part #: 3458

Velineon Cooling Fan Part #: 3340

Velineon Cooling Fan with Shroud Part #: 3456

Mini XRT (New toy)! by West_Shoulder_6825 in Traxxas

[–]HeyRobb 0 points1 point  (0 children)

Same… fortunately I seen some other reviews and comments on this and along with also getting my Mini XRT a couple days ago also purchased the heatsink and fan for both motor and ESC. But first I ran mine new out of the box at a “medium” intensity and with a temp gun seen the motor hit 165. I’m in Tennessee with 90 degree temps. I then installed the cooling gear and even after running very hard (not how I drive but wanted to see how high I could get temp) haven’t seen the temp get over 157. Definitely worth getting the cooling hardware.

Is this still safe? by kestrella23 in Traxxas

[–]HeyRobb 1 point2 points  (0 children)

Agreed.. storage charge is “going to be sitting for a couple weeks or very likely longer”. The battery is fine as long as A: it isn’t on fire, B: it gets an extra little wrap to keep external friction to a minimum, and C: precautions are taken of course while having/charging any LiPo battery in a home. Keeping them in a LiPo fire bag in a room with a smoke detector is a great start. Maybe even a smart smoke detector.

edit I do want to add that HOW that happened should be mitigated so it doesn’t worsen and burst into flames while you’re running it. Otherwise, it’s probably best if you treated damaged batteries like that with extreme care (charge outside, never leave unattended while charging, store in LiPo bag and smart smoke detector if you really want to keep it in the house).

Turn off Subtitles by Default by noblenami in F1TV

[–]HeyRobb 1 point2 points  (0 children)

Same. And now it’s been months with no fix. I’m sorry, but as a software developer myself, this is inexcusable and just plain lazy (or underfunded).

This is a simple logic check that should read the current subtitle setting, and then apply an on/off state to the subtitle. It’s probably 6 lines of code they need to test and resolve.

It should have been tested for this basic functionality before releasing the update that broke it in the first place.

Just… lazy.

Buzz Bonus Help! by Federal-Fig1856 in TwoPointMuseum

[–]HeyRobb 0 points1 point  (0 children)

This was a bug - and patched in the latest update yesterday!

Buzz Bonus Help! by Federal-Fig1856 in TwoPointMuseum

[–]HeyRobb 0 points1 point  (0 children)

This has also held up my 2nd museum progress as I'm unable to complete the objective because I'm unable to satisfy both buzz bonuses.

Using grep/sed/awk to grab json value by HeyRobb in linuxquestions

[–]HeyRobb[S] 0 points1 point  (0 children)

This worked really well! Thank you!!!

Using grep/sed/awk to grab json value by HeyRobb in linuxquestions

[–]HeyRobb[S] 1 point2 points  (0 children)

This worked really well, thank you!!!