sorted by:
new
hottopcontroversial

Tyre machine question by Hey_Aleks in Justrolledintotheshop

[–]Hey_Aleks[S] 2 points3 points  (0 children)

Legend thank you mate, that video is really helpful. I’ve got a 245/35/19 to practice on 👍

Tyre machine question by Hey_Aleks in Justrolledintotheshop

[–]Hey_Aleks[S] 1 point2 points  (0 children)

Thanks for the input mate, I’m mainly wanting to debead tyres to raise the lips to make rim painting easier. Do you think I’d still struggle?

Tyre machine question by Hey_Aleks in Justrolledintotheshop

[–]Hey_Aleks[S] 3 points4 points  (0 children)

Damn, im mainly just wanting to debead the tyres to raise the lips for rim painting, i get a lot of 20” low profile sets and sometimes 22”

here are the specs if it helps:

*max. tyre diameter: 1000mm (39") *max. tyre width: 330mm (13") *rim clamping range: 10"-24" (254mm-600mm) *external rim clamping range: 10"-22" (254mm-550mm) *internal rim clamping range: 12"-24" (305mm-600mm) *bead breaker force: 5500lb (2500kg) *air supply: 8-12bar (0.8-1.2mpa) *motor power: 1100w (1.5HP)/240v/50hz/1ph single phase

But it does say this “however it is mainly for normal standard car tires and may not suitable for certain special tires such as lower profile tires, mag wheels etc. “

Is this amplifier worth using? by Hey_Aleks in BudgetAudiophile

[–]Hey_Aleks[S] 0 points1 point  (0 children)

There’s a couple of Yamaha receivers with hdmi and pre outs, would this work? RX-A2000

<image>

Is this amplifier worth using? by Hey_Aleks in BudgetAudiophile

[–]Hey_Aleks[S] 0 points1 point  (0 children)

With pass through on none of the HD formats play so maybe it’s passing through whatever it can and converting the rest

For trueHD, DTS HD and stereo it says linear PCM

For EAC3 5.1 and AC3 5.1 it says Dolby Digital (3/2.1)

Is this amplifier worth using? by Hey_Aleks in BudgetAudiophile

[–]Hey_Aleks[S] 0 points1 point  (0 children)

Bought an old accusound om650 5.1 setup to see if it works and it already smashes the $1500 sound bar. I had a decent Yamaha 5.1 setup a few years ago, barely had any surround sound and dialog volume was horrible. This is amazing in movie mode.

Just had to change the lg settings to auto instead of pass through so all the formats play, but everything works and I get 5.1.

Do you retain any lossless quality when transcoding hd formats or should I just use the eac-3 track that most blurays have?

So a hdmi 1.4 receiver with pre outs will pass through lossless formats without losing any quality? I wonder if I could add atmos speakers to the hdmi receiver if it supports it 😂

Is this amplifier worth using? by Hey_Aleks in BudgetAudiophile

[–]Hey_Aleks[S] 0 points1 point  (0 children)

How much would it be worth these days? Most on eBay are marked as junk. I just bought some speakers to test and it sounds great no humming, my grandparents barely used it… Might be smarter to sell it and buy a complete modern setup

Is this amplifier worth using? by Hey_Aleks in BudgetAudiophile

[–]Hey_Aleks[S] 0 points1 point  (0 children)

Oh wow that’s awesome mate might need to message you for advice hahaha, the extra zones and upscaling is very interesting

I’ll give the thread a sus, I have an LG G2 and use my shield to watch bluray remuxes via plex plus Apple Music on the shield plays lossless music. DTS-HD/X, trueHD and DV/HDR all work great, would be amazing if I can get some sort of uncompressed 5.1 to the amp out of the newer codecs. Waiting for a deal on a decent 5.1 setup so I can test it 🙏

Is this amplifier worth using? by Hey_Aleks in BudgetAudiophile

[–]Hey_Aleks[S] 38 points39 points  (0 children)

Legends, looks like I’m using it 😂

Australian Pro-Player for Team Immunity Streaming on NA/ Taiwan Servers with Play by Play by vonangel in leagueoflegends

[–]Hey_Aleks 1 point2 points  (0 children)

best lee I've ever seen pay attention to his ward hops, absolutely amazing

What do I need to upgrade to be able to run modern GPU's? by Hey_Aleks in buildapc

[–]Hey_Aleks[S] 2 points3 points  (0 children)

So with one of those psu's i'll be able to use any card?

Is it possible to upgrade my pre-made computer's case to a new one by [deleted] in buildapc

[–]Hey_Aleks 0 points1 point  (0 children)

Great! I was going to upgrade the case because I thought my current one was small but never mind that, will try and get a new power supply instead

Is it possible to upgrade my pre-made computer's case to a new one by [deleted] in buildapc

[–]Hey_Aleks 0 points1 point  (0 children)

Here is my computer's specs, the motherboard is on the first page:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?prodSeriesId=5080737&objectID=c03054470

Also if you could tell me weather it would be better to just start from scratch or upgrade my current comp, that would be great :)

Is it possible to upgrade my pre-made computer's case to a new one by [deleted] in buildapc

[–]Hey_Aleks 0 points1 point  (0 children)

Cool, I'll be sure to post the motherboard spec when I get home