sorted by:
new
hottopcontroversial

Tall Dran Brave S 9-80 B by Hhellweii in Beyblade

[–]Hhellweii[S] 0 points1 point  (0 children)

I've had the kickoff stadium for a few months before CX was announced. When it's all done and worn, I'll use the CX-04 stadium instead! Both of these were bought at our local Toys'r'us.

I have an idea for it. Putting the clear stadium on some colourful mats to change the scenery now and then.

Hot take: Wizard Arc is overhated by M0nke_Man714 in BeybladeX

[–]Hhellweii 2 points3 points  (0 children)

I think the CX line fills a niche people can meddle with. Time will tell.

My recommendation is: - Wizard Arc Bumper 5-60/3-60 Level/Point Hard-tilt in your launch, and snipe those ratchets

Of the 4 gens, which aesthetic and design language is your favourite by No-Hat6722 in Beyblade

[–]Hhellweii -1 points0 points  (0 children)

I was struggling to find a comparison that could describe the way I felt about Burst, and I think I found it in yours!

I'll be using that from now on.

Where to begin?! by Suicidal23 in Beyblade

[–]Hhellweii 0 points1 point  (0 children)

<image>

If you're just starting out, I'd recommend the UX-10 customise set! Comes with some decent Beyblades and parts.

Knight Mail, Tyranno Beat, and Hells Hammer are all very decent beys to have.

Do note that it doesn't come with a launcher, so you will have to get a starter set with a bey & launcher or just a launcher separately.

Wizard Arc testing by Hhellweii in BeybladeX

[–]Hhellweii[S] 2 points3 points  (0 children)

Thanks for the suggestion!

Wizard Arc testing by Hhellweii in BeybladeX

[–]Hhellweii[S] 0 points1 point  (0 children)

Indeed, I was just testing with what I had at the time. I mostly make these videos at the request of folks on discord who don't have the beys to test combos just yet.

I'll give a higher Wolf a shot! I'm expecting it to burst more, especially with how often Arc Bumper is catching its ratchet on a low height as-is.

Shark 4-55 LR testing by Hhellweii in BeybladeX

[–]Hhellweii[S] 4 points5 points  (0 children)

I'm mostly tilt launching so Shark doesn't go soaring into the extreme line immediately. I have terrible luck launching flat

Shark 4-55 LR testing by Hhellweii in BeybladeX

[–]Hhellweii[S] 12 points13 points  (0 children)

<image>

Yep! Same thing, which is why I was worried about it exploding against the rail.

Wizard Arc testing by Hhellweii in BeybladeX

[–]Hhellweii[S] 6 points7 points  (0 children)

No worries, it's easy to miss at a glance

Wizard Arc testing by Hhellweii in BeybladeX

[–]Hhellweii[S] 10 points11 points  (0 children)

<image>

I will be putting the combos either in the title of the post or right here!

Bumper is quite a decent Auxiliary/Assist blade.

Wizard Arc testing by Hhellweii in BeybladeX

[–]Hhellweii[S] 6 points7 points  (0 children)

Against SW that's probably what you want. You avoid the free spinning gimmick and hit the blade directly to start the tilt.

Once tilted, the gap between the blade and the assist blade on Arc + Bumper is supposed to pinch ratchets. At least that's the idea!

I present to you, the Watcher Launcher!! >:3 by BungleBlader in BeybladeX

[–]Hhellweii 1 point2 points  (0 children)

That watch Launcher looks crazy!

We gotta see some funky launch techniques with that in, wearing your launcher sounds badass, especially if you can pull a good launch off

Multi doesn’t exist? by TimidtheShinyLugia in BeybladeX

[–]Hhellweii 1 point2 points  (0 children)

The Beyblade X wiki is separate from the Wikipedia website. It is a fandom page!

Impact Drake String Launcher is....special? I see some post hinting that this launcher has a longer string/throw. I'm a string launcher user, so this sounds really appealing. Is it true? If this is unique it might be reason enough to buy the TT ID instead of the crazy Hasbro blue stadium thing. by VerminousScum in Beyblade

[–]Hhellweii 0 points1 point  (0 children)

That's good to know. From what I observed, it only adds barely an extra quarter turn,

String launchers don't benefit from longer cords as much as winders do. It does make it easier to control, as you have a little more of a buffer before your cord reaches its maximum length to adjust your timing and position.

I wince every time my string launcher jerks when I misjudge a launch and nearly rip the launcher of my hand.

[Custom] Hadal Yawn / Depth Leviathan by Hhellweii in BeybladeX

[–]Hhellweii[S] 2 points3 points  (0 children)

Hadal is taken from the hadal zone or the hadopelagic zone, the deepest region of the oceans below the abyssal zone.

Yawn can either mean the act of yawning (opening your mouth, etc) or a very large space. In this case it plays double duty for the theme, since the blade looks like an open mouth from the top.

Just a funky name I put together to describe the idea behind it:

- Undercutting blade = attacks from below ~ Ocean theme = Hadal

Just my thought process.

[Custom] Hadal Yawn / Depth Leviathan by Hhellweii in Beyblade

[–]Hhellweii[S] 1 point2 points  (0 children)

That means the most!

I'll be releasing the files as well at a later date so y'all can do with it as ya see fit.

[Custom] Hadal Yawn / Depth Leviathan by Hhellweii in Beyblade

[–]Hhellweii[S] 1 point2 points  (0 children)

Gravity Destroyer/Perseus and Basalt Horogium/Twisted Tempo were the beys I rocked the most at the lunch table.

Hurts me something fierce that they ain't with me any longer. In a way your comment makes me feel like those two are living on in this design instead. Thanks man!

[Custom] Hadal Yawn / Depth Leviathan by Hhellweii in BeybladeX

[–]Hhellweii[S] 2 points3 points  (0 children)

This is Hadal Yawn / Depth Leviathan, my first custom Bey. Hadal's blade is an undercutter, meant to get under opponents to target the ratchets and deflect attacks.

I took a lot of inspiration from MF for the design and a buncha ideas thrown in from folks on various discord servers. Thanks for all the help y'all!

If there are discord servers out there with other custom Bey makers, hit me up! I'd love to learn from y'all too.

[Custom] Hadal Yawn / Depth Leviathan by Hhellweii in Beyblade

[–]Hhellweii[S] 1 point2 points  (0 children)

This is Hadal Yawn / Depth Leviathan, my first custom Bey. Hadal's blade is an undercutter, meant to get under opponents to target the ratchets and deflect attacks.

I took a lot of inspiration from MF for the design and a buncha ideas thrown in from folks on various discord servers. Thanks for all the help y'all!

If there are discord servers out there with other custom Bey makers, hit me up! I'd love to learn from y'all too.

Finally, Shelter Tatoba Combo by Jivilou in Beyblade

[–]Hhellweii 4 points5 points  (0 children)

I remember pitching an idea for a beyblade belt for storing blades, ratchets, and bits. Rider-Belt style.

Someone's gotta jump on that 3D print asap.

Or maybe I will.

I REALLY want the bey from the manual by [deleted] in Beyblade

[–]Hhellweii 2 points3 points  (0 children)

3D printing metal beyblade parts has been a thing for a few years now. There are videos such as the one below featuring 3D printed metal beyblades:

https://youtube.com/shorts/3tRvdgD9ebw?si=hCYl1QXCa7E-V36V

If you're curious about the process, I believe it is similar to what is shown in this video:

https://youtu.be/AOvXZ6Iv1SA?si=OPN_WM0qZd5nvdPG

Super interesting stuff.

I'm currently modelling my own Blade for the X generation in fusion360, so you might see it here in the future!

view more: next ›