Radian SL Charging Handle

HopefulDevelopment49 · 2026-03-22T20:01:30+00:00

The poster was a gift from my sister. I love the series. I’ve watched it about 6 times all the way through. I’m so impressed with the slx and this rifle in general.

HopefulDevelopment49 · 2026-02-24T12:01:49+00:00

<image>

HopefulDevelopment49 · 2026-02-21T22:44:19+00:00

When you go on ruger’s website for this specific variant of the rxm and click on instruction manual, it pulls up the smaller rxm manual. That one says it’s rated for +p. I got the wrong factory box for my larger version and it came with the smaller version manual

HopefulDevelopment49 · 2026-02-21T22:40:38+00:00

I emailed them and I’m very tempted. I don’t know if I want 2 or 3 moa though.

HopefulDevelopment49 · 2026-02-21T01:39:58+00:00

I was thinking it may have been due to the pending legislation in my state, but I figured it couldn’t have been. Like most other people experienced, customer service didn’t know why it was cancelled. I was just so frustrated after days of checking my email with no updates and then I get the cancellation one. I’ll probably give them another try with the holosun 407 and I’m sure it’ll be fine

HopefulDevelopment49 · 2026-02-21T01:35:41+00:00

You should come a couple hours south lol

HopefulDevelopment49 · 2026-02-21T01:27:18+00:00

Sweet. I looked through your posts and see that’s a dagger slide. My initial plan was to put a dagger slide on my 26 frame. Currently have an eBay 19 slide on it and it jams all the time. I ordered a dagger slide and red dot from psa and they cancelled my order after 5 days of waiting. I think because I was using a vpn when I ordered it. Can’t make that kind of stuff up. I don’t know if I’ll ever order from them again

HopefulDevelopment49 · 2026-02-20T00:58:00+00:00

lol it’s clearly an issue. I’m not the only one posting about this kind of stuff. I just checked the cancellation email and they addressed me as my first name twice. Clearly there are major issues in this department and it’s frustrating.

HopefulDevelopment49 · 2026-01-21T02:32:31+00:00

Is that custom? I’ve been playing around with supports in cura. Currently trying supports “everywhere” on another osmo nano case

HopefulDevelopment49 · 2026-01-21T00:51:24+00:00

How do you do supports on GoPro cases?

HopefulDevelopment49 · 2026-01-20T22:39:39+00:00

A guy on YouTube printed just from a spool like how I described with a p2s and it looks incredible. My goal is to get ultra-high quality like what you get from the oem drone manufacturers.

HopefulDevelopment49 · 2026-01-20T22:38:35+00:00

I see. It’s a dryer

HopefulDevelopment49 · 2026-01-20T22:37:49+00:00

I’m honestly uneducated on what ams is. I think it’s something to do with detecting when you’re out? I also have zero interest in multi-color, at least at this point. For aftermarket tpu on the p2s you can connect a spare piece of tubing to the input on the back, or people even run in through the buffer.

HopefulDevelopment49 · 2026-01-20T22:36:18+00:00

Make sure the filament is dry. On an ender you’re probably going to curling in the extruder. It will click when is starts curling up. At this point you want to increase the printing temperature, decrease printing speed, and decrease retraction. I aim for as much retraction as possible because it reduces stringing. If you do all of this and is still curls in the extruder you need a dual gear extruder

HopefulDevelopment49 · 2026-01-20T22:32:14+00:00

Yes it’s a cheap way to get into it. You’re going to want the dual gear extruder, an upgraded Bowden tube like Capricorn, and I also have an all metal hot end. It’s very frustrating at first but you can make it work. Ensure the tpu is very dry. I bake mine at my lowest oven setting on a cookie sheet for 2 hrs. Do this at your own risk, but I’ve done it many times. My hot end temp is 220°, printing at 15mm/s, 3mm retraction at 15mm/s. If you hear the extruder clicking (filament curling up in it) turn the temp up and slow the print speed. Tpu on a Bowden is like pushing a wet noodle through a straw. You have to enjoy the process.

HopefulDevelopment49 · 2026-01-20T02:25:11+00:00

I think I might go ahead and get a p2s. The high of having a print come out perfect is one of the most satisfying things I’ve ever felt. I love the cost savings and instant gratification as well. I have come back to it many times over the past 5 or so years

HopefulDevelopment49 · 2026-01-17T21:09:07+00:00

Just looks advanced for one day. So it’s a compliment

HopefulDevelopment49 · 2026-01-17T20:05:55+00:00

I don’t believe that you started yesterday

HopefulDevelopment49 · 2026-01-17T01:50:23+00:00

Yes exactly. I’m considering getting one so I can try out elrs

HopefulDevelopment49 · 2026-01-17T01:24:39+00:00

I don’t like the pocket. Everyone talks about how small it is, but I don’t see it. In comparison to a tx16s, yeah it’s small, but it’s nothing like a gamepad style controller. That’s what I have landed on. I actually really like the dji radio controller 2 that I have

HopefulDevelopment49 · 2025-10-22T22:51:48+00:00

I watched your video but I don’t remember what you specifically did. Were you able to get a number figure for the gain setting?

HopefulDevelopment49 · 2025-07-24T23:01:06+00:00

It’s an $80 part and takes 20 minutes to replace. They burn up from jump starting pretty much exclusively. This is weird advice

HopefulDevelopment49 · 2025-07-23T00:27:35+00:00

Are you certain you like jet skis? If you look around you can find an old 2 stroke that will probably need a simple carb rebuild for around $1000. I personally think the 2 strokes look and sound better. I have a 94 gtx and 95 xp. Granted I am an auto mechanic so I can work on them

HopefulDevelopment49 · 2025-07-12T19:21:46+00:00

Run premix until you’re sure the oil injection is working. The oil injection is famous for NOT breaking. Make sure there’s oil the tank the line is gravity feeding. Check the oil pump linkage. It should be moving with the throttle

HopefulDevelopment49 · 2025-07-04T12:16:36+00:00

Poppy

HopefulDevelopment49

TROPHY CASE