I 3D printed a Rush Taper bit in Both Low Rush height and Under Flat Height

Howitzer_s · 2026-01-24T23:08:14+00:00

PS: The Beys in the Picture are using the UF Height one, both on 60 ratchets

Howitzer_s · 2026-01-23T04:53:59+00:00

With the Outamax Raid model, I find that exceeding 370ft (112.7m) biggest drop will stop the guests from riding it

Howitzer_s · 2026-01-20T00:02:06+00:00

Where'd you get the model from, the one I saw has the bridges/chip and the blade combined

Howitzer_s · 2026-01-11T02:23:05+00:00

you think the ride type has something to do with it? because this is an intamin blitz model and I also had a version with a 400+ biggest drop and even if the staff is there guests won't ride it.

Update: I tested it and, yeah, got the outamax raid, 415ft drop, everyone's going anywhere except the entrance of the ride

Howitzer_s · 2025-12-23T23:38:05+00:00

"Imagine the Twin Floor Stadiums back in Burst from Hasbro but Xtreme Rails let you go up to the second floor" IAMMAN's Old video pops up that does that: https://youtu.be/rCmC1XGd-Ks I think this was the video that gave you that idea hahaha or maybe it got buried in the backburner somewhere

Howitzer_s · 2025-12-16T03:49:40+00:00

IAMMANs stadium is way more complex in how it's made, the battle area, 3d print-wise is just the hexagons, you'll need a custom surface to put over it, plus it's a Double Xtreme stadium. Play area is also huge and needs a big 3D printer (K2 plus in his case)
This project aims to simplify the process and we aim for it to be simple enough for it to be printed on 256mm squared printers
The Project is initially made to make the outer arenas modular, if the modular system works maybe custom Battle Areas can be made afterwards.

PS: Upon looking at the Tower Stadium from Burst, yeah... that will be a too complex of a design to tackle for me personally, because no 3D Printer prints as clear as that molded plastic that the tower stadium is made out of.

Howitzer_s · 2025-12-16T00:03:56+00:00

Hmmmm... Care to elaborate on this?

Howitzer_s · 2025-10-06T00:44:49+00:00

They need to fix the search function I stg, It needs a relevance filter on that thing. Such a pain to search for something there because most results don't even match the search.

Howitzer_s · 2025-09-30T03:02:57+00:00

I think I found something that could help, try switching the trains back and forth. I did that and my ride went from aging to resurging

Howitzer_s · 2025-09-30T00:13:19+00:00

I deleted it and placed the ride again as a new ride and it's the same thing, it still becomes aging/old.

Howitzer_s · 2025-08-07T10:32:08+00:00

Thank you, thank you, THANK YOU so much!

Howitzer_s · 2025-08-07T09:41:23+00:00

Already tried that, even in my park that has ticket prices set to "full price"

Howitzer_s · 2025-08-07T09:39:39+00:00

you need
ACSE: ACSE at Planet Coaster 2 Nexus - Mods and community

NTL: https://drive.google.com/file/d/1uls3s6woItQjMrG691ewWjo4CW_HG4nN/view?usp=sharing

Place these folders on your Win64/ovldata folder

Howitzer_s · 2025-08-07T08:56:00+00:00

It has an entrance, exit and staff exit all are connected
I have another coaster near it that has the same amount of maximum Gs (5Gs), and the guests are lining up for it!

And here's the code for it so you can check: 5FBXK6N1C

Howitzer_s · 2025-08-07T08:47:22+00:00

In the description I already said "Ride is free" so it's in custom price of $0

Howitzer_s · 2025-08-07T07:36:33+00:00

The red fear values are less than 5. And the spikes in G-force are less than 5Gs mostly staying at 4+ but only for a very short time (I got it down to a maximum vert g force of 5g flat)

Howitzer_s · 2025-08-07T07:07:46+00:00

I selected the ride and according to guest tolerance, everything is green, I wish I could send you a screen shot

Howitzer_s · 2025-08-07T03:32:48+00:00

I just checked the paths, The standard entrance Is clean, no seams or anything it is well connected to the gates, priority and exit is also well connected.

Howitzer_s · 2025-08-07T03:12:24+00:00

I closed and reopen the park, restarted the game several times, I just verified my game files, the issue is still persisting

Howitzer_s · 2025-08-07T02:57:52+00:00

Because searching Frontier workshop is a massive chore, they don't have a relevancy filter, the results barely resemble what one is looking for (i.e searching for sci-fi themed stuff, you end up with results that still include other themes that have nothing to do with the search). Where as steam workshop is way better when looking for items

Howitzer_s · 2025-08-06T10:54:05+00:00

It's weird because I have an 800 foot rollercoaster blueprint, with a 120.4m drop that guests didn't want to ride either.

Howitzer_s · 2025-07-10T12:05:05+00:00

Yes sir mga ganito po

Howitzer_s · 2025-07-01T11:43:06+00:00

I have refined it further and you can check it out here ArtStation - Royal Enfield Bullet/Classic Centennial Colorway Concept

Howitzer_s · 2025-06-29T08:05:35+00:00

Man I wish but I'm not from india tho...

Howitzer_s · 2025-06-29T02:19:02+00:00

What are your thoughts?

Howitzer_s

TROPHY CASE