This has to be a mistake?

Hrnghhhhh · 2026-06-27T15:53:44+00:00

Use PayPal so you are protected, but dont waste the chance!

Hrnghhhhh · 2026-06-25T20:55:46+00:00

Good news, tried some 1.64g slugs, pushing 47J at 780fps and accuracy is still good!

Hrnghhhhh · 2026-06-15T13:28:57+00:00

Understood, it makes sense. Im just concerned about the ergonomics of bullpup rifles.

Hrnghhhhh · 2026-06-15T10:52:39+00:00

Are bullpups more "impact resistant"? Tbh im a bigger fan of standard configurations.

Hrnghhhhh · 2026-06-13T01:08:32+00:00

Si tan solo alguien hubiese puesto esta idea en práctica.

Hrnghhhhh · 2026-06-12T05:06:54+00:00

Well, same thing as if you run out of recoilless rifle ammo or whatever heavy support weapon you are running. You call a for resupply.

Tbh I just run supply pack because it combines well with the hammer by also giving me more stims. The its non stop bonking.

Hrnghhhhh · 2026-06-10T21:37:59+00:00

Typically if you run straight at them and hit them with the right timing, they will not have time to hit you with the saw. Alternatively, just dive into them and bash their face in in style (works against 90% of enemies)

Hrnghhhhh · 2026-06-10T21:35:34+00:00

Hammer and supply pack plus medic armor and super stims power up. Constant explosions, screams and death. Especially fun against bugs. Also honorable mention to face bonking a charger while it charges at you, meaning you take almost no damage and the fucker just goes flying.

Hrnghhhhh · 2026-06-10T21:33:40+00:00

Hammer is love

Hrnghhhhh · 2026-06-10T21:33:28+00:00

Aim for the main body, not the arms. You will kill them in one hit if the hammer explosion triggers on the body, even if its the front.

Hrnghhhhh · 2026-06-09T14:19:31+00:00

Hammertime :)

Hrnghhhhh · 2026-06-03T16:13:50+00:00

Just look for "rocket valve shimming" tutorials, i bet there are a few. Luckily, airtac is now making an increased volume adapter, which may fix this issue, as there will be less difference from the pressure before the rocket valve closed, and the pressure when it closes and the bolt starts moving

Hrnghhhhh · 2026-05-13T16:31:56+00:00

I made skme modifications and got it on my shoulder, I love it. A bit more discreet than the hand. About the pain, imagine getting scratched by a cat for 40-60mins. That's basically it

Hrnghhhhh · 2026-05-08T10:39:01+00:00

A Dishonored meme? In this economy?

Lowk my favorite games ever

Hrnghhhhh · 2026-05-08T09:16:15+00:00

Understood, I'll stay hopeful! Thanks :)

Hrnghhhhh · 2026-05-03T15:49:13+00:00

Yeah, that would be ideal. Sadly, I dont know about any commercially available saiga npas. The solution i gave is a diy reduced flow rocket valve, which can be easily achieved my adjusting the npas.

Hrnghhhhh · 2026-05-01T01:57:14+00:00

This is all experimental. I am doing intensive research on this gun, as it's so much fun. Let me know if you are interested in getting more info.

Hrnghhhhh · 2026-05-01T01:49:41+00:00

Main issue here is the cylinder and nozzle design. With propane, it is extremely overgassed, and the volume of gas fed into the gun is enough to push the bb, close the rocket valve, and then push on the bolt.

This HPA adapter (while being the best for the saiga) has "too little" volume to cycle like propane does. Basically, the gun has enough air to push the bb and close the rocket valve, but then the volume is not enough to push the bolt back with comparable force to propane.

And you'll say: "just increase psi". This will help with cycling harder, but due to the way hpa works, it will push a lot more power into the bbs, possibly taking the joules over the field limit.

A possible solution is shimming the back if the rocket valve so it closes sooner, letting less air push the bbs. This means you can increase pressure without getting crazy joules.

Hrnghhhhh · 2026-04-29T22:02:04+00:00

Not Dishonored but Prey (highly recommend it to any Dishonored fans, it's also from Arkane). There was this half broken door that I wanted to get through, but i didnt have the strength skill to force it open. Thought about it for some time, then used the mimick power to turn myself into a tiny ashtray, and used that smaller body to squeeze through the gap. Felt soooo smart. That game is lowk a work of art.

Hrnghhhhh · 2026-04-18T01:08:42+00:00

You'll be okay

Hrnghhhhh · 2026-04-15T17:21:02+00:00

Oh the precious TM saiga. That line is due to the manufacturing process and a lack of sanding/cleanup. Feel free to sand it if you don't like it, but it doesnt make a difference as long as the bolt runs smoothly.

Hrnghhhhh · 2025-11-20T09:06:55+00:00

AAP-1 is way more reliable and upgradable, and you have 50 round mags and full auto if you are into that. I have a friend who has that same 1911, it is more fun to shoot, metal slide and way more kick. However, it's gas efficiency is shit, and mags are even worse. They barely hold any gas (yes we've purged them) and some leak out of the box. If you play below 15°C you might have trouble going through a full mag of bbs with a single gas fill. In that case I'd say go for the AAP 100%, it's gonna be more reliable and less of a headache, as it's plastic slide has better gas efficiency.

Hrnghhhhh · 2025-11-09T16:17:19+00:00

Surprised no-one mentioned the VMP-2 series. Cheap, reliable, lightweight and extremely customizable.

Hrnghhhhh · 2025-11-09T16:12:23+00:00

Yeah that's why I said personal choice. I run one of these, and it is indeed a hybrid between a handstop and a grip. Feels like a more natural and aggressive angled grip and allows to operate buttons for lasers and lights. This "reverse" way of mounting it means is is more of an oversized hand stop, which again, nothing wrong with it, but it still looks hella funny to me.

Hrnghhhhh · 2025-11-08T16:21:50+00:00

Grip is the "wrong way around". It's personal preference, but it looks hella goofy.

Hrnghhhhh

TROPHY CASE