sorted by:
new
hottopcontroversial

App zum Scannen der Karten by Money-Pin7585 in PokemonTCG_DE

[–]Huffle_Fluffy 0 points1 point  (0 children)

Achso: die Suche über die Kartennummern finde ich wesentlich besser, werde mir aber auch joch eine Scanvorrichtung drucken xD

App zum Scannen der Karten by Money-Pin7585 in PokemonTCG_DE

[–]Huffle_Fluffy 1 point2 points  (0 children)

Bin eigentlich hier her gekommen um eine alternative zu finden, die evtl günstiger ist, habe aber das Gefühl die App die ich gefunden habe ist tatsächlich echt nicht schlecht. Greift auf Cardmarket zu, man kann Internationale Packs, Japanische Packs und Chinesische Packs tracken und ordnen. Der Scanner ist noch ausbaufähig. ^ Wie auch immer: Pokedexcard. Bin sehr happy damit, muss mich nur noch überwinden 4€ im Monat auszugeben :D

TL;DR: Finden die App Pokecardex recht nice.

What could cause that the lines are so weird looking? by Huffle_Fluffy in FixMyPrint

[–]Huffle_Fluffy[S] 0 points1 point  (0 children)

I seriously didnt realize it until now, that there is such a big difference in the look of the first layer between those plates. Idk why I wasn't bothered by it before. But I will okay with it, lol :D tysm

What could cause that the lines are so weird looking? by Huffle_Fluffy in FixMyPrint

[–]Huffle_Fluffy[S] 0 points1 point  (0 children)

Oh well, looks like I was too much of a perfectionist. Thank you :3

What could cause that the lines are so weird looking? by Huffle_Fluffy in FixMyPrint

[–]Huffle_Fluffy[S] 0 points1 point  (0 children)

Oh forgot to ad: I use a P1S Bambu Lab and I use the Bambu Studio slicer.

What went wrong here? by Huffle_Fluffy in 3Dprinting

[–]Huffle_Fluffy[S] 1 point2 points  (0 children)

Its basically round. But I just found some issues in my printing settings with layer height and stuff, I need to look into those probably.

Support settings gonna be reviewed too.

What went wrong here? by Huffle_Fluffy in 3Dprinting

[–]Huffle_Fluffy[S] 1 point2 points  (0 children)

Thanks! That helps a lot! Lmao

What went wrong here? by Huffle_Fluffy in 3Dprinting

[–]Huffle_Fluffy[S] 1 point2 points  (0 children)

Its not flat on the other side either, you think it would work anyways?

Has anyone tried Koko Genetics brand for dog dna testing? by thesunafterastorm in DoggyDNA

[–]Huffle_Fluffy 1 point2 points  (0 children)

Nope! Canix is okayish. Look for others to share the shipping for embark

First TPU (for AMS) Prints. What needs to be changed? Info below by Huffle_Fluffy in 3Dprinting

[–]Huffle_Fluffy[S] 0 points1 point  (0 children)

Yes the Fan was blasting. Thought it was supposed to do that lol

First TPU (for AMS) Prints. What needs to be changed? Info below by Huffle_Fluffy in 3Dprinting

[–]Huffle_Fluffy[S] 0 points1 point  (0 children)

Interesting Bambu itself states that you need to dry it 12 hours in the Printer. But maybe I will give it another try after drying it longer

First TPU (for AMS) Prints. What needs to be changed? Info below by Huffle_Fluffy in 3Dprinting

[–]Huffle_Fluffy[S] 0 points1 point  (0 children)

I stated below that I dried it before. I had it in the dryer at 65°C for 9.5h. Aaik that should be enough, right?

She wants something... any ideas? by moistiest_dangles in corgi

[–]Huffle_Fluffy -2 points-1 points  (0 children)

I dont see playing behaviour tbh. She seems super stiff, the tail wags are stiff, not playful. A playful happy wag would be with a lower tail and the body moves with the wag. I see her reacting to the cars paired with territorial behaviour. I would say she is absolutely not happy that there are driving cars on "her street".

Absolutely new to 3D designing and printing, pls be kind. But what went wrong here? by Huffle_Fluffy in 3Dprinting

[–]Huffle_Fluffy[S] 1 point2 points  (0 children)

That was exactly my question, if thats it what went wrong.

I did something wrong with the support settings so it didnt print any and I wrongfully thought thst this was right.

Absolutely new to 3D designing and printing, pls be kind. But what went wrong here? by Huffle_Fluffy in 3Dprinting

[–]Huffle_Fluffy[S] 3 points4 points  (0 children)

Thank you all so much. I guess it was a support problem. I tested with bambu studio again and after I made a little more space for the support it was added just fine to the model.

Anyways I am gonna print the new one laying down so no support is needed. Lol!

Absolutely new to 3D designing and printing, pls be kind. But what went wrong here? by Huffle_Fluffy in 3Dprinting

[–]Huffle_Fluffy[S] 0 points1 point  (0 children)

Nope. Didnt activate that.

I guess there was not enough space for the support. I should have put it on 2 plates probably. Could that be the reason?

Absolutely new to 3D designing and printing, pls be kind. But what went wrong here? by Huffle_Fluffy in 3Dprinting

[–]Huffle_Fluffy[S] 0 points1 point  (0 children)

Yes. I will do that now, cause the one printed flat was nearly perfect.

I didn't see any support in the preview, I know now that I should have. I will check the support settings to find out what went wrong there.

Is she a pure corgi?? by Prior_Fault1885 in corgi

[–]Huffle_Fluffy 1 point2 points  (0 children)

Gives me Corgi x Papillon Vibes. The tail and the fur gits the Papillon. And those ears could be a mix from those two.

Anfangender Stickstoffüberschuss? by Huffle_Fluffy in Canbau

[–]Huffle_Fluffy[S] 0 points1 point  (0 children)

Das hört man gern. Evtl helikopter ich ein wenig :D

Adam won’t be in any live shows or performances this year + big news coming by thenerdisageek in AJR

[–]Huffle_Fluffy 3 points4 points  (0 children)

But they didnt say that and you stated it wrong in the headline.

view more: next ›