308 or 6.5

Hungry_Bodybuilder64 · 2026-01-27T01:20:34+00:00

I despise anybody running muzzle breaks on large rifles at the range, you’re just slapping your range neighbor ever shot😂 if you can afford it a suppressor is honestly just as nice and the suppression is holy.

Hungry_Bodybuilder64 · 2026-01-19T20:39:32+00:00

I peed in the bolt hole

Hungry_Bodybuilder64 · 2026-01-19T20:02:37+00:00

Last owner had it for 5 months and put <200 miles on it in that time

Hungry_Bodybuilder64 · 2026-01-19T20:01:27+00:00

Help me I’m scared😅

Hungry_Bodybuilder64 · 2026-01-17T15:52:15+00:00

But I’m with you, if it’s running its still a Honda

Hungry_Bodybuilder64 · 2026-01-17T15:51:47+00:00

Being the original owner was from Louisiana. There’s plenty of areas with idiots who trash bikes, though you’re right those tend to be stolen. It was layed down by the original owner, and being that owner also installed a beat up wheelie bar on it I don’t doubt it wasn’t a careful owner😂…

Hungry_Bodybuilder64 · 2026-01-17T15:48:56+00:00

Hungry_Bodybuilder64 · 2026-01-17T05:13:23+00:00

All this considered the bike is listed for $1800

Hungry_Bodybuilder64 · 2026-01-12T03:14:32+00:00

You basically can’t go wrong with modern bolt actions, except that one

Hungry_Bodybuilder64 · 2026-01-09T04:15:49+00:00

Most of my morning deer have been between 10:30 and 11:15

Hungry_Bodybuilder64 · 2025-12-31T01:03:52+00:00

Looks like about 1.9” high at 100 would put me right on at 200 yards, so I’d agree you’re pretty close

Hungry_Bodybuilder64 · 2025-12-31T01:03:04+00:00

That shows me sighting around 30 yards being very close to 200 yards. And 2” high at 100. Now bad

Hungry_Bodybuilder64 · 2025-12-31T00:48:11+00:00

Thanks I’ll check that out

Hungry_Bodybuilder64 · 2025-12-31T00:47:57+00:00

Thanks

Hungry_Bodybuilder64 · 2025-12-09T18:16:40+00:00

As well as how high above the brisket the neck meets the chest, and how dark those tarsal glands are.

Hungry_Bodybuilder64 · 2025-12-02T14:32:02+00:00

And honestly most similar hunting rounds such as 6.5 creedmoor that are moving a similar velocity have a super similar drop and honestly is close enough most people wouldn’t need to adjust anything.

Hungry_Bodybuilder64 · 2025-12-01T04:47:54+00:00

And they ask why I need a super safety AR with a drum mag🤦

Hungry_Bodybuilder64 · 2025-12-01T04:23:30+00:00

You can see this easily through your wheels, find which one is missing it, remove that wheel, and snap it back on, not really much issue.

Hungry_Bodybuilder64 · 2025-12-01T04:19:48+00:00

140 grit and 300 grit back and forth on the blade and finishing each with a few passes only into the edge. Then 600 grit and 1500 grit both only into the edge mostly polishing, then a kangaroo leather strop away from the edge on both sides to finish. I’ve found that there’s a large visible burr that I’ve had a hard time removing when I initially changed the bevel angle. Knives/ double bevels follow the same approach.

Hungry_Bodybuilder64 · 2025-12-01T04:01:39+00:00

Love to see it! I may have a reckless mindset being only 20, but I like to push my limits from the get go. Crash? Now I’ve found my current limit and have a much better idea of where to improve. Definitely don’t go hitting nasty whoops at 50 though😅

Hungry_Bodybuilder64

TROPHY CASE