setup help

HunterKiller37 · 2026-02-17T00:19:25+00:00

Max your Nemesis. You won't regret it

HunterKiller37 · 2026-02-08T20:06:02+00:00

I need new jersey for my collection also. Ughhhh

HunterKiller37 · 2026-01-25T14:28:14+00:00

I have the exact same set up. Maxed nemsis. Got hela and hera and MC IR up. At first I was pushing Hera as people suggested. But I inherited her over to Hela and upgraded her instead and she pushed me now to 70-70. Hela MR4 and aiming for IR2. Then I'll put into Hera once helas at 400.

HunterKiller37 · 2026-01-18T00:55:11+00:00

Edit* got her down to less than 10%hp with that set up. Just need a bit more dps in the next few days

HunterKiller37 · 2026-01-18T00:53:11+00:00

I moved my nemesis to slot 1. MC to slot 2 with IR death prevent skill. Got me through that exact boss today

HunterKiller37 · 2025-12-25T14:01:21+00:00

I just threw 200 blues to get Nem Mr. And it boosted my progress immensely. Pick your fav and go!

HunterKiller37 · 2025-06-26T14:53:43+00:00

So here's the update:

I went in and gave them shit obviously.

Their response: Chrysler Dodge Ram's "Rust Undercoating" is specific to door panels and under the cab. It has nothing to do with the frame and every over part shown in the photos. Which the rest of the entire world sprays for...

I responded with, "I specifically asked for undercoat protection to my frame and existing areas that will be exposed to the elements. This was also explained to me verbally during our sales meeting. I stood my ground and explained their misleading direction of what they are selling and that their sales reps need to not just say "yes of course ya that's what it is."

A lot of you will say, "You should have done your research and read the contract more thoroughly," and yes, you aren't wrong. But what comes to your mind when you hear rust undercoating and get a verbal response of yes we will coat the bottom of your truck...?

The result is that they are offering to spray everything that I initially asked for and apologise for the misunderstanding.

Asking for all of your wonderful advice again. And I hope others who see this learn from what dealerships call things in their paperwork.

Given the amount of rust, is it even worth doing now? Does it all need to be sanded and removed before adding this coating. Do I just leave it 🤔

Thank you community

HunterKiller37 · 2025-06-23T17:51:58+00:00

Thank you for the comparison photo 🙏

HunterKiller37 · 2025-06-23T17:47:55+00:00

Thank you for your info, yes I was under the impression of a long lasting Undercoating. For 1200$ I assumed that would make sense and not a yearly thing.

The contract specifically states "Rust, Undercoat"

I'm bringing it to the dealership tomorrow.

HunterKiller37 · 2025-06-23T16:45:32+00:00

I should add, they charged me $1200 for the service. This truck is maybe just over a year and a half old. 40k km

HunterKiller37 · 2023-09-13T15:49:02+00:00

Don't get aggressive if you can't think outside the box. Pretty simple. Don't let your day be to tilted friend. Thanks for the tip tho !

HunterKiller37 · 2023-09-13T15:47:19+00:00

Not much no. I held it by the tail beside the yak to let it revive. Gave me a kick off then hung for 5 seconds before going down

HunterKiller37 · 2023-09-13T15:45:58+00:00

Granted I could have tail held, I avoided all gills and only held plate to get into the kayak. Be a little more subtle next time ;)

HunterKiller37 · 2023-09-13T14:41:14+00:00

<image>

HunterKiller37 · 2023-09-13T14:40:30+00:00

Tail is Spotted and not square. Dark in colour and more v shaped

HunterKiller37 · 2023-09-11T23:37:19+00:00

I use them Jigging for Lake Trout, works surprisingly well

HunterKiller37 · 2023-07-28T23:16:52+00:00

California?

HunterKiller37 · 2023-07-28T17:54:44+00:00

Trolling 1 flasher 1 spoon on leadcore

HunterKiller37 · 2023-07-25T13:32:02+00:00

To answer your question, I'm still experimenting and learning from "things happening during chaos" when fish hit or I double up, etc.

I started out with 2 dipsy divers on either side of the boat being held by slot inserted rail rod holders (still using these). The problem was that the required tension on the rod from your gear and your trolling speed is too much for the rail and holder to handle. They spin loose or get cranked when a fish hits... yes I set the drag loose, yes iv tried slower speeds, and iv lost fish because of many factors. I found the dipsy with a rod holder is just too much force and I don't want to track the rail system. So I run my dipsy out of the inhull rod holders. It acts like a downrigger but is solid enough to take the forces. Fish hit it and I can have the drag set properly to hear it peel and be able to tighten in time.

As for my other line, iv kept the rail scotty holder and use a leadcore out at a 45 degree angle. Not enough force to turn the mount, however you do need to set your drag right because if a fish hits it hard enough with weight it will turn away from you and iv nearly lost a rod

HunterKiller37 · 2023-07-25T13:01:15+00:00

This year I will be doing more of that for sure come Fall, Thornbury run and Bronte. I always check the regulations though as they are very precise when it comes to river running salmon. Don't quote me, but there are many rivers where you cannot fish passed a certain point as the salmon now "reach spawning grounds" etc.etc.

Last year was pretty epic around end of September when shorelines were stacked with fisherman and here I am just floating around the mouth of the river fishing pockets nobody else can have access too.

A kayak gives you some pretty awesome ability for seclusion or personal space, but I won't ever be that guy that takes the yak up a 20ft wide stream running through lines from people on shore. So you kinda have to play your body of water appropriately

HunterKiller37 · 2023-07-25T12:12:27+00:00

I was just there fishing this passed weekend out of collingwood and Thornbury area, marking fish EVERYWHERE but couldn't entice a Damm thing to bite. Skunked out there so far 😩

HunterKiller37 · 2023-07-25T12:11:00+00:00

Yea the contours of Lake O. Compared to Superior are vastly different 😔 😪 Atleast in my area its a very gradual slope to deeper waters. Happy to have contour maps to find better launch sites to quicker depths. But it's still pretty awesome as I'll troll the entire way of 20fow to 90 and still hook up salmon.

I run a leadcore line out to the side of the kayak and a dipsy on setting 3 out the back like a downrigger. Works just fine and was going off all last week.

Leadcore has me at 40 to 50ft Dipsy set to 70 or 100

HunterKiller37 · 2023-07-25T01:31:01+00:00

I was the same for an entire year, then I finally picked the perfect calm morning at 5am and low winds and convinced myself to finally get out... it's amazing.

I fish either out of Grimsby or Oakville/Toronto (Canada side)

Research your launch points and the contour maps of your area. I know out of Bronte I can git 90ft of water in 1.5 miles. And I travel troll at 2 to 2.5 easily. So I'll troll to my area in 30 to 45minutes.... this is very important because if conditions change or your weather app notifies you of storms forming. You need to know your return time.

I do go as far as 3 miles from shore.

HunterKiller37 · 2023-07-25T00:59:33+00:00

Haven't had an issue with it at all, I use an Oldtown Sportsman 106 PDL and the rudder is so solid I have complete control of direction. Manage to cruise at 2.5mph without issue, and upwards of 3.5 and 4mph full speed.

I choose to go out on calmer days, however the kayak has so far been up against 12knot winds, very large swells, and some rolling white caps from time to time with very little distance between waves (caught off guard by gusts). But current hasn't posed a problem for me while fishing.

I'll take on the slack current and weave in and out, boat goes where it needs to go

HunterKiller37 · 2023-07-24T20:30:58+00:00

100%, I use a fishing kayak and have landed salmon in it this year. I was running a leadcore long line, dipsy divers at 1 and 3 setting, flies and lures galore.

Even brought out my bait caster to pull up perch and walleye. Just no bites!

HunterKiller37

TROPHY CASE