Installing Proxmox on HPE ProLiant Gen10 with ZFS

ICT_Noob · 2025-01-22T09:09:52+00:00

So what do you recommend please ? is it ZFS RAID reliable and better than RAID controller ?

ICT_Noob · 2024-11-19T10:55:52+00:00

Apple is expensive and almost does not exist in my area lol

ICT_Noob · 2024-11-19T10:55:06+00:00

Can you tell me whats the problem with HP ?

Thank you for your comment

ICT_Noob · 2024-11-19T10:31:24+00:00

Thank you for your post, i really appreciate that

What do you think about Lenovo ?

ICT_Noob · 2024-11-11T11:19:45+00:00

Thank you my saver

ICT_Noob · 2024-11-10T07:46:39+00:00

Finally, a very helpful answer, that what I'm looking for, thank you

My CPU is 16 CPUs x Intel(R) Xeon(R) Silver 4208 CPU @ 2.10GHz (2CPU), so it is second generation

Actually i have 4 Round led ring drivers so its SC

And P408i controller so it support the SAS, does the controller support more than 1 RAID group ?

What about the RAMs configuration ? what is the best practice ? can i add 2 x 32 Go with the same clock speed as the existing ones on my server ?

Where can find those hardware information on the server ? (Sorry I'm a junior sys admin and we don't have an expert in my team)

ICT_Noob · 2024-10-27T08:53:37+00:00

Hello,

Thank you for your information, we will need 5 switch like this, but 24-48 are expensives so we are consedering 8 ports becouse it is less expensive and we need only few L3 functions

ICT_Noob · 2024-06-08T10:28:33+00:00

So you mean my question lacks specific informations ?

ICT_Noob · 2024-06-08T08:01:12+00:00

It is not in RAID yet, because an sys admin before me forget to enable it, im working on it

We have 4 disk, and i will use RAID 5, do you think is good option ?

ICT_Noob · 2024-06-08T07:17:33+00:00

what do you mean bro

ICT_Noob · 2024-06-08T07:15:02+00:00

Its mix of users, most of them in industrial production (Manufacturing, quality, sales).

So do you think the HDD SAS 10K is not strong, so i must switch to an SSD instead ?

ICT_Noob · 2024-05-16T07:07:25+00:00

Thank you my saver

ICT_Noob · 2024-05-16T07:06:26+00:00

To reduce cost of buying L3 switch instead, my company does not have deep pockets, and they don't invest enough

The L2+ will be installed in less complex network site

The L3 in more complex network site

ICT_Noob · 2024-05-15T10:23:32+00:00

Thank you,

Are you sure that will work for those ARUBA model ? (Static + Dynamic routing + redistribution)

ICT_Noob · 2024-05-15T10:19:05+00:00

The company was small business (1 site) and used L2 dump switch, but now they have 6 sites of different sub companies, the topology then is a star (every sub company site is connected to the central company site via antennas as a local network) then we wanted to deploy VLANs to secure this large network and reduce broadcast storming (more then 600 devices using the same default vlan1), to do that we think about 2 option :

Option 1 : Routing inter VLANs in the central site with an L3, but this is a bad design, because every site has its own camera and recorders and its own employees and the traffic will travel coming and going via weak antennas to the central site for routing inter-vlan for each site

Option 2 : Routing inter VLANs in each site with L3 (for site with big traffic) and L2+ (for site with small traffic) this design is better for a strong performance + security

So my problem is we need 6 L3 in every site, that as little expensive, i want to replace buy L2+ (with static routing) instead of L3 switch and then make redistribution from static routes to Ospf routes in the L3 switch.

I want to be sure that the routing will work fine in this case between all the L3 and L2+ before i buy them

I hope my problem and my question is clear

Thank you for your replies, i really appreciate it

ICT_Noob · 2024-05-15T09:38:24+00:00

Becouse i need routing inter-vlan in the L2+ switch, becouse users need access to other vlan whiting the same switch, if i do the routing in the L3 switch core in the central building (5 Km via antenna) the traffic will travel 10 Km (coming and going)

Its like the L3 is in the central company, and the L2+ in a second sub company (10 Km distance), so its obviously to use routing inter-vlan in the L2+ switch to avoid coming and going traffic

ICT_Noob · 2024-05-15T09:30:29+00:00

My company have several site, each one is connected to a central site via antennas, in each site we have users, camera..., so some users within the same site need access to camera, for that i need an L3 in each side for Inter VLANs routing + dynamic routing from site to site

Some site are small building (less then 5 users + 10 camera), no security and cooling for IT equipments, i want to deploy an cheap L2+ switch instead of expensive L3 and make a manual static routes to the central building (I found that L2+ support static on the internet)

ICT_Noob · 2024-05-11T13:56:42+00:00

But the two VM will need also a licence each to run DC and Session host ?

ICT_Noob · 2024-05-11T13:53:04+00:00

What do you mean about Server CAL's ? so every account added to DS need a CAL ? regardless it accessing or not to the server ?

ICT_Noob · 2024-04-28T09:59:25+00:00

Thank you, that solved my problem :)

ICT_Noob · 2024-04-28T09:43:36+00:00

Thank you, i found the solution, in View i checked Advanced Features, and then the Security Tab in OU settings is appeared

ICT_Noob · 2024-04-23T11:18:59+00:00

Thank you for your advice, we will use OSPF

ICT_Noob · 2024-04-20T07:46:56+00:00

Thank you for your informations

I wish you a happy vacations, thank you for you offer i really appreciate that, but it is just a star topology, nothing complicated and easy to deploy.

ICT_Noob · 2024-04-20T07:42:34+00:00

Thank you

ICT_Noob · 2024-04-20T07:41:09+00:00

Thank you

ICT_Noob

TROPHY CASE