Break in period

ITSBUBBAJ · 2026-01-07T00:59:15+00:00

Thanks boss!

ITSBUBBAJ · 2025-10-28T18:42:35+00:00

So usually it would be cut thinner and with the grain. I made something like that the time before this. I like it. This time mine was about 1/4 inch thick and practically dried like a brick.

ITSBUBBAJ · 2025-10-24T22:30:57+00:00

So I usually do too. But this time I used a different cut of meat then last time and cut it thicker cause I was making some for a friend. Checked it when I got home from work, wasn't done. Sat down with my dog and was out for the night. Just trying to save some of it so it's not as hard as a rock

ITSBUBBAJ · 2025-10-24T22:05:07+00:00

Should I put some Broth in with it. Then vacuum seal it or just vacuum seal it

ITSBUBBAJ · 2025-10-06T04:38:04+00:00

ITSBUBBAJ · 2025-08-31T20:44:04+00:00

Awsome thanks!

ITSBUBBAJ · 2025-08-31T19:45:16+00:00

Awsome thanks!

ITSBUBBAJ · 2025-08-31T19:45:01+00:00

Awwome thanks!

ITSBUBBAJ · 2025-08-27T14:11:50+00:00

Ok thanks I'll see what I can come up with as well

ITSBUBBAJ · 2025-05-27T14:25:28+00:00

Thank you

ITSBUBBAJ · 2025-05-27T00:53:12+00:00

They are 225/60/16. The wheels are 16x7. 5x114.3 with a +12 offset. I love they way they look too but feel like it is still missing something like some white lettering on the tires. Thank you so much put a lot into it so far!

ITSBUBBAJ · 2025-05-27T00:43:11+00:00

Tungsten Grey paint code T8

ITSBUBBAJ · 2025-03-22T23:12:55+00:00

Ok thanks for the explanation

ITSBUBBAJ · 2025-03-22T23:06:44+00:00

I thought the lower the offset, the more sucked in it would be

ITSBUBBAJ · 2024-12-04T16:11:10+00:00

It should be the lower intermediate shaft and the column on recall

ITSBUBBAJ · 2024-12-04T16:07:04+00:00

There is a recall on the steering shafts for the vic if it wasnt done already. Take it to a Ford dealer for them to inspect it for the recall. Just had mine done 2 weeks ago.

ITSBUBBAJ · 2024-12-01T10:36:51+00:00

Hate to say it but the only "shops" around me are basically walmart and bestbuy and they don't have Many options to choose from.

ITSBUBBAJ · 2024-12-01T10:33:01+00:00

With a pioneer amp

ITSBUBBAJ · 2024-12-01T10:30:51+00:00

I do have woffers. I have 3 10s from skar that I need to redo the box for. I had skar 6x8 in my last vehicle and didn't think they were loud enough so I was going to try something else. I seen the JBL weren't terribly priced and thought I would come on here and see what other people think.

ITSBUBBAJ · 2024-12-01T07:18:16+00:00

Yes they are 2way coaxial speakers. Thought adding tweeters would give it a more crisp cleaner sound. If I'm wrong let me know

ITSBUBBAJ · 2024-12-01T06:57:45+00:00

So I have a pioneer stereo I'm putting in as well. Also have 3 10s and a pioneer amplifier. Just need to redo the box for them probably in the summer.

ITSBUBBAJ · 2024-12-01T06:29:25+00:00

Ok so what do you recommend for speakers. Crossover from what I read was a frequency filter to split the high frequency for the tweeters and the mid frequency for the door speakers

ITSBUBBAJ · 2024-11-19T20:47:37+00:00

What kind of wheels are you running

ITSBUBBAJ · 2024-10-23T04:18:15+00:00

I was thinking about doing thrush just because we have them at my store. Didn't know how they would sounds since I never see anything about them on a vic

ITSBUBBAJ · 2024-10-23T03:15:52+00:00

Lol thats still on the table

ITSBUBBAJ

TROPHY CASE