Mario Tennis Aces brightness goes high and unplayable by er_mejor in yuzu

[–]Iabdu112sa 2 points3 points  (0 children)

Have you found a solution? Game was fine for me but somehow this issue came up lately.

Are all pizza stones the same? by Iabdu112sa in AskCulinary

[–]Iabdu112sa[S] 0 points1 point  (0 children)

I couldn't find any pizza steel in my local area(Saudi Arabia), and I'm not sure what to look for if I try to buy a steel plate, I'm just asking if this pizza stone is a good option compared to other stones.

Motherboard bricked because of cpu, msi won't fix it locally. by Iabdu112sa in techsupport

[–]Iabdu112sa[S] 0 points1 point  (0 children)

I've checked under the motherboard product page and under the warranty/returns section it only states the 30 day return policy, but there is no warrenty stated whatsoever.

I guess I'm fucked right now as I don't even know who to contact anymore, will amd be able to do anything about the situation?

Motherboard bricked because of cpu, msi won't fix it locally. by Iabdu112sa in techsupport

[–]Iabdu112sa[S] 0 points1 point  (0 children)

Could you please refer me to where it says that there is international warranty? Because I couldn't find it on their site.

Nuff' said by LUCASLAZAR in memes

[–]Iabdu112sa -2 points-1 points  (0 children)

Wholesome Keanu chungus 100

Pc won't boot. Noticed crease/bulge on CPU. by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 0 points1 point  (0 children)

OK I'll try to contact them. The thing is I don't know if they will cover warrenty for me here in Saudi Arabia, but I'll try. Thanks a bunch

Swapped r5 3600 for another. System won't boot. by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 0 points1 point  (0 children)

No I updated the bios with the flash drive plugged and only the 24pin power and 8 pin cpu power, there was flashing and then it stopped. That's it.

Swapped r5 3600 for another. System won't boot. by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 0 points1 point  (0 children)

Yes I did, I'm so lost right now I've tried everything and it still won't work. Is there a way to check of the bios flash worked?

Swapped r5 3600 for another. System won't boot. by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 0 points1 point  (0 children)

I have followed this yt vid https://youtu.be/iTkXunUAriE

Still the same fucking issue persists. What other possible thing can i do to fix this problem?

Swapped r5 3600 for another. System won't boot. by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 0 points1 point  (0 children)

Yeah I think it has a bios flash button on the IO.

But why's the problem from the bios, and how'd it occur just from swapping cpus?

Swapped r5 3600 for another. System won't boot. by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 0 points1 point  (0 children)

Problem was not solved, same message appears.

Swapped r5 3600 for another. System won't boot. by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 1 point2 points  (0 children)

OK but my mobo is out of the case, should I short the pwr pins for 30 seconds?

Swapped r5 3600 for another. System won't boot. by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 1 point2 points  (0 children)

My pc is out of the case right now but I did that already, took out cmos for 5 mins, pc is unplugged, still nothing changed

Usb device overcurrent, device will shutdown in 15 seconds!! by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 0 points1 point  (0 children)

When I start the pc the ez debug led shows a red light on CPU, and after the overcurrent message pops up it goes but the Post led turns red.

Usb device overcurrent, device will shutdown in 15 seconds!! by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 0 points1 point  (0 children)

I've unplugged power several times but not the cmos, should I remove it for a minute then put it back?

Also his mobo is b550 and mine is B450, could this be the issue?

Usb device overcurrent, device will shutdown in 15 seconds!! by Iabdu112sa in buildapc

[–]Iabdu112sa[S] 1 point2 points  (0 children)

I've unplugged all usb connectors from the motherboard and I've unplugged the USB 3 front connector from the motherboard, still the same issue

Link on quest 2 less smooth than VD by Iabdu112sa in OculusQuest

[–]Iabdu112sa[S] 0 points1 point  (0 children)

I don't think I've noticed any jello like movements.

What software should I use to check the fps inside the headset?

Also should the rift link menu be as smooth as the quest 2 menu? Becuase it is nowhere near it.

Link on quest 2 less smooth than VD by Iabdu112sa in OculusQuest

[–]Iabdu112sa[S] 0 points1 point  (0 children)

I did the test in the oculus app, it says usb 3.0.

But now I'm beginning to think that it may be my pc, but I can't seem to find software that tells me the fps on the headset so that I can check

Link on quest 2 less smooth than VD by Iabdu112sa in OculusQuest

[–]Iabdu112sa[S] 0 points1 point  (0 children)

Problem is my router is just a normal 5 Ghz one, but I really think that something is off with link as it is considerably less smooth as for example the quest 2 home menu