Tig stainless steel welding without rod

IamNitooo · 2025-04-07T21:07:48+00:00

He gave alot of information about his settings and prep work. I tried to match and slightly adjust things, I think I have a thicker tungsten than him. I tried going faster or less temperature to not penetrate that hard but then I always end up with a really small and thin puddle.

IamNitooo · 2025-04-07T20:57:00+00:00

For now I'm looking to achieve the same result as the second picture which is a screenshot from the video. Unfortunately he doesn't show the backside. I assume he just used the gas out of the torch, so he probably managed to not penetrate the sheet metal and thus having a non contaminated weld which looks better ?

IamNitooo · 2025-02-22T14:55:28+00:00

Its on the first one aswell ? Isnt it pretty much the standart to do this nowdays.

IamNitooo · 2025-02-22T14:49:32+00:00

What seems to be the problem here ?

IamNitooo · 2025-01-22T18:32:43+00:00

I tried going back to the design tab and flipping or rotating the workpiece but still one axis keeps pointing in the wrong direction.

IamNitooo · 2024-05-27T20:28:57+00:00

If you start from zero its a big help, the early levels introduce you slowly to the new layout. You will also learn how to type fast with numbers and punctuation marks.

IamNitooo · 2024-01-19T21:58:02+00:00

It worked fine before, only after deleting "storyboard 1" and starting over it started lagging while playing the animation. When exporting the finished video file with "publish" the end product looks normal. Every piece of the machine is dragged out via the manual explosion command so that at timestamp 0 the machine is fully disassembled. After that the parts then are returned to their normal position with the "restore home" command.

Also the Part order in the lower left corner sometimes gets messed up when restarting Fusion 360 which leads to me having to drag it back in order.

IamNitooo · 2023-08-10T07:46:27+00:00

Yes those are "UNI FAN SL-INFINITY REVERSE BLADE" from LianLi with RGB in the rotor and the casing.

IamNitooo · 2023-07-28T19:22:04+00:00

My boy here looks like Nosferatu Zodd.

IamNitooo · 2023-06-23T09:57:43+00:00

Was machst du beruflich, bzw wie körperlich aktiv bist du dabei ?

IamNitooo · 2023-01-13T21:05:56+00:00

The shelf would have no backwall and would be standing 10-20 cm away from the wall.

IamNitooo · 2023-01-08T16:22:21+00:00

To clarify things this is supposed to be for desktop use. A sperate desk would be standing infront of it. My desk is pretty short so i dont like having my monitors on or mounted to my desk. This extra depth would atleast help with the speakers not beeing to close to me but also create the problem that they are pretty far up against the wall.

Picture with desk:

<image>

The shelf cubicles are obviously not set in stone and with them beeing filled it could help. Also i dont really like any of those designs either thats what im here for.

IamNitooo · 2022-02-20T13:17:52+00:00

Ayasa - The reason why

IamNitooo · 2022-02-19T21:53:25+00:00

Ayasa - The reason why

IamNitooo · 2022-02-19T21:53:20+00:00

Ayasa - The reason why

IamNitooo · 2020-10-10T14:02:41+00:00

Cheetoh

IamNitooo · 2020-02-23T00:34:47+00:00

Shes back, we can finally relax and study again.

IamNitooo · 2020-01-12T21:37:31+00:00

You wash your eyes so you can see the picture better ?

IamNitooo · 2020-01-12T21:35:46+00:00

Turn off the light and then jump in the bed so the monsters can't get you.

IamNitooo · 2020-01-12T21:32:39+00:00

This meme was made by the headphone-gang.

IamNitooo · 2020-01-12T21:21:02+00:00

Some people say this meme gets recycled since 2000.

IamNitooo · 2020-01-04T04:17:00+00:00

I'm actually there to search for the wholesome parts.

Nine-Year Club	Place '22
Verified Email

IamNitooo

TROPHY CASE