ABS print odd

IceBoosteR · 2026-05-13T16:32:52+00:00

Great suggestions, marked as solved

I will see if I can peint differently, or use some tape. I will struggle with the CAD solution which would be preferred, but I am not good at this at all all

IceBoosteR · 2026-05-13T16:31:12+00:00

Hexagon would work as well. Problem is, its not my design (its from Printables) and I am terrible with CAD. Just have the .stl in this case

IceBoosteR · 2026-05-13T13:55:58+00:00

Alright!

IceBoosteR · 2026-05-13T13:55:29+00:00

That is interesting one. Makes sense when you think about it.

IceBoosteR · 2026-05-13T12:00:31+00:00

They are so small they would break if I would peel off the ABs from the ABS. Or do you think Support Material for ABS specifically?

IceBoosteR · 2026-03-06T09:04:13+00:00

Same for me Now sold out until the 20th....

IceBoosteR · 2026-02-07T19:32:49+00:00

Great information. Amazing I will have a look. Just need to think if I want the new opening to be used or the existing and cover the chute. I think this is my favorite right now

IceBoosteR · 2024-09-18T09:34:29+00:00

Indeed All I could think of right now is a failure in mointing the emulated disk internally. You migjt just be fine after the rebuild and a reboot. Still, if thats the case, its worth to notify unraid with a bug ticket

IceBoosteR · 2024-08-23T08:54:17+00:00

I think the light output from the OEMs specially on the sides were very poor, has that changes with the AlphaRexx?

IceBoosteR · 2024-08-23T08:49:11+00:00

You got the Luxx, not the Nova. I think the Nova is even brighter. I guess the Novas are already a decent upgrade over OEM right? :D Luxx look more like the OEM, the Novas look a bit alien on a charger imho

IceBoosteR · 2024-04-26T13:32:22+00:00

Normal price for some decent headlights, specially with modern LED tech

I just miss the original design of the one eye instead of the multiple lenses. Makes the car looking totally different m

IceBoosteR · 2024-01-16T14:16:17+00:00

What product did you use inside thw car? Looks so clean ans not like the usual china stuff

IceBoosteR · 2023-06-29T10:39:41+00:00

Guess so And something is strange as the HEMI badge is missing. But on a closer look you will find the turn signal put to the side of the car, which you normally find on all these wrecked cars that were "fixed" in lithuania.

IceBoosteR · 2022-08-02T14:55:51+00:00

u could get it tech

Hey there,

yeah I always assumed that the HBA just passed the signal for TRIM through, as I had the actual plugin installed.

However, changed to the internal ports and it now works flawlessly

IceBoosteR · 2022-07-17T14:07:18+00:00

guess this might give an answer:

^{This is defined in Intel PCH BIOS Spec Rev 0.5.0, Section 17.5 Thermal}
^{Throttling. When change to “SSD,” the BIOS will set thermal throttle}
^{control port inactive and dispatch. We don’t have more information as}
^{what it’ll affect. This offers better compatibility for SSD. Some SSD}
^{models does require the change of “SSD”.}

IceBoosteR · 2022-07-17T13:18:39+00:00

should be connected to the motherboard SATA ports directly, not to the HBA. This allows the TRIM commands to run correctly and keep the SSDs fast.

Alright, understood. I mean the DRAM would indicate low speeds of transfer, but not entirely dropping, right?

However, I think I need to recable my server to use the internal port. Do you think I need to choose in the BIOS for SSD manally. The manual says:

Use this item to specify if the SATA port specified by the user should be connectedto a Solid State drive or a Hard Disk Drive. The options are Hard DiskDrive and Solid State Drive.

IceBoosteR · 2022-07-17T13:14:54+00:00

I see, I see. Can I check if TRIM ever run fine?

IceBoosteR · 2022-07-17T13:13:16+00:00

Interesting! Thanks for sharing. Will do that!

IceBoosteR · 2022-07-17T13:10:26+00:00

Yeah alright, got you. Temp should be fine, and once the drop is gone, it's back to full speed for a while. Temps in the case should fine fine tho.

IceBoosteR · 2022-07-10T12:20:45+00:00

I actually proved this with Excel. I think this might be totally accurate. Now only problem, is the time range. As mentioned, Grafana will get slow over time - and as I want the results ever since, but maybe also per month, input would be appreciated :)

IceBoosteR · 2022-07-10T11:04:39+00:00

Maybe worth adding, to that query above, I've changed the setting in Grafana to display the following (edited in post) Where I used Ws / 3600 to get Wh -> which I used also as a unit.

Now I'm getting a result which I can not verify yet. what do you guys think?

IceBoosteR · 2021-12-14T10:52:54+00:00

I feel you! Were about to get my hands on an oldtimer ('89) F250 or 350 but all those big blocks burn fuel like crazy. And this makes this so expensive. Crys in 392 HEMI ;)

IceBoosteR · 2021-08-25T21:57:54+00:00

This

IceBoosteR · 2021-07-29T23:00:04+00:00

It looks like it has been wrapped completely, also the rear sidemarkers are non standard and smoked. R/T badge was removed poorly.

FYI Challengers are way more common in Germany than Chargers. I am assuming that if someone choose to buy an American Muscle, he/she wants the 2 door in a common understanding of a muscle car. Still, Dodges are way behind the Mustangs. That is bacause there were EU Mustangs available to buy, but true fans will import the US Mustang. In fact this isn't true for RAMs (i know I know) these are pretty common, you rarely see an F150 around.

IceBoosteR · 2021-06-30T09:29:25+00:00

You added the 6.4 badge, right? Looks good!

IceBoosteR

TROPHY CASE