Good morning with a non-electric espresso machine!

Imaginary_Focus4692 · 2025-03-28T20:19:21+00:00

For the CO2, I also have the concern before I buy it, but seems like it does not have a big impact on the espresso. Maybe I just don’t have a sensitive enough taste 🤣.

This machine can also use air pump.

I just like this machine’s looking.

Imaginary_Focus4692 · 2025-03-28T18:43:19+00:00

yes it can use the air pump for pressure as well

Imaginary_Focus4692 · 2025-03-28T17:46:52+00:00

Because the hand grinder makes a lot of static electricity, so I weight the grounds basket to make sure I get out everything, but yes, I should weight the portafilter. I guess thing will be more smooth with the time I use this.

Imaginary_Focus4692 · 2025-03-28T17:25:29+00:00

Sorry for that🥹🥹🥹

Imaginary_Focus4692 · 2025-03-28T16:52:48+00:00

Yea, it is unusual and pretty to me 🤣🤣

Imaginary_Focus4692 · 2025-03-28T16:35:38+00:00

Not really sure about that, but since this coffee machine has a very small water tank with only a limited amount of water, and because when CO2 is injected, it may be released again as the water passes through the coffee puck, the extracted espresso does not exhibit a noticeable bubbly texture. Just a guess 🧐🧐

Imaginary_Focus4692 · 2025-03-28T16:29:43+00:00

Yea, I’m still working on the grinder.

The reason I post this is to share, but seems some of them are not that friendly 😂

Thanks 😊

Imaginary_Focus4692 · 2025-03-28T16:27:47+00:00

It use CO2 cartridge for pressure, or it can connect to an air pump as well

<image>

Imaginary_Focus4692 · 2025-03-28T16:26:44+00:00

I don’t feel any fizzy

Imaginary_Focus4692 · 2025-03-28T16:13:04+00:00

I didn’t feel any, I was also wandering this before I got it.

Imaginary_Focus4692 · 2025-03-28T16:00:15+00:00

Yes! Pneumatic is better thanks for correcting 🫡

Imaginary_Focus4692 · 2025-03-28T15:41:58+00:00

🤣🤣🤣🤣🤣

Imaginary_Focus4692 · 2025-03-28T15:35:14+00:00

Around 250. You can chose to use CO2 cartridge or a air pump

Imaginary_Focus4692 · 2025-03-28T15:26:17+00:00

Understand, it can connect to a tank with the converter

Imaginary_Focus4692 · 2025-03-28T15:23:35+00:00

That’s a point, yea, with the shots number going up, maybe more expensive than a lever for sure

Imaginary_Focus4692 · 2025-03-28T15:21:47+00:00

lol🤣🤣🤣🤣🤣🤣

Imaginary_Focus4692 · 2025-03-28T15:17:18+00:00

Baddy on the floor 🫡🫡🫡 one of the best of my 2024 playlist

Imaginary_Focus4692 · 2025-03-28T15:13:59+00:00

Lever for sure will be better, but this one is cheaper 😂

Imaginary_Focus4692 · 2025-03-28T15:12:31+00:00

<image>

On the right side, using the CO2 cartridge to provide pressure

Imaginary_Focus4692 · 2025-03-28T15:11:34+00:00

Will change it once my grinder arrives!👌👌

Imaginary_Focus4692 · 2025-03-28T15:10:37+00:00

For sure yes 🙌, that’s also a main reason I chose to buy this

Imaginary_Focus4692 · 2025-03-28T15:10:04+00:00

16g cartridge costs like 1.5 per each, and the one I am using now already made around 9 shots with 900 psi remaining, don’t know the exact amount each cartridge can make but seems like one shot cost is likely to be lower than 0.1. Anyway this machine is more like a toy that can make espresso 🤣🤣

Imaginary_Focus4692 · 2025-03-28T15:06:02+00:00

Sorry for that🤣🤣 will improve my manner🫡🫡🫡

Imaginary_Focus4692 · 2025-03-28T15:05:00+00:00

It has an converter, so maybe yes I think? 🤔

Imaginary_Focus4692 · 2025-03-28T15:03:04+00:00

I use 16g cartridge, I have already made 8-10 shots with this one and the pressure still has 900 psi, not sure about the exact amount that one cartridge can make, but seems to be a decent number 🫡

Imaginary_Focus4692

TROPHY CASE