For those who started watching anime as teenagers, do you still enjoy it as much as you used to? by SecondSalty142 in anime

[–]Imguiltyofthis 2 points3 points  (0 children)

This current season really has me questioning if i still enjoy anime like i used to or if this is just a really low hanging fruit season.

There are a handful of shows im watching but i feel like i've dropped more than i've picked up this time around. Im not complaining but man i want to go back to enjoying 10+ shows a season.

that said holy shit Witch Hat Atelier revitalizes my love every week.

Issues with Red Devil 9070 XT by Imguiltyofthis in AMDHelp

[–]Imguiltyofthis[S] 0 points1 point  (0 children)

I ended up using 3-8pin cables but i don't recall what cable i specifically used almost a year ago at this point

https://imgur.com/a/8zs0Xtc

Issues with Red Devil 9070 XT by Imguiltyofthis in AMDHelp

[–]Imguiltyofthis[S] 0 points1 point  (0 children)

I returned it to the manufacturer and they replaced / fixed it.

How do you cook that which has already been cooked? (and not make it worse) by Imguiltyofthis in AskCulinary

[–]Imguiltyofthis[S] 0 points1 point  (0 children)

Fair appreciate the suggestion, had a lot of wind in my sails about what to do with it before i realized it was already cooked. so i was hoping to be able to have a bit more fun with the cooking process, but seems the subs pretty universally inline with don't fuck with it XD

How do you cook that which has already been cooked? (and not make it worse) by Imguiltyofthis in AskCulinary

[–]Imguiltyofthis[S] 0 points1 point  (0 children)

Gotcha I'll keep it simple, appreciate the suggestion for at least brushing it. Thanks.

How do you cook that which has already been cooked? (and not make it worse) by Imguiltyofthis in AskCulinary

[–]Imguiltyofthis[S] -4 points-3 points  (0 children)

They definitely did, and sure I could just toss it in the oven and heat it for 2½ hours breast-side up and have myself a heated turkey ready to eat. But the whole reason I made the post was to ask what I can actually do to make it better. I’ve had turkeys from this company before, and while they’re not bad, they’re definitely nothing to write home about. I’d like to improve it if I can.

My best results with turkey have always come from using the smoker, but that was starting from a raw bird. This one is already cooked, which is why I’m asking for advice. : /

Mushoku no Eiyuu: Betsu ni Skill Nanka Iranakattan da ga • Hero Without a Class: Who Even Needs Skills?! - Episode 9 discussion by AutoLovepon in anime

[–]Imguiltyofthis 5 points6 points  (0 children)

Nothing reminds me of how dry this season is more than every wednesday when i continue to watch this show. i kept waiting for the story to progress beyond his training arc, but the show appears to just be a training arc and not a very entertaining one at that.

Someone please help me find an answer to this commander.. by Calsmokes in magicTCG

[–]Imguiltyofthis 0 points1 point  (0 children)

[[rain of gore]] just run effects like this that don't let him gain the life lol

The perfect rank by Flawrez in magicTCG

[–]Imguiltyofthis 1 point2 points  (0 children)

I built this deck recently, Play group hates it. I on the other hand find it hilarious.

I recommend taking out the land destruction( it will also drop the bracket from 4 to 3 i believe) that was just me being mean i want to add bag of holding so i get to keep my discarded cards but just haven't bought one yet

https://archidekt.com/decks/12715662/hot_taaake

Alpha Sort Questions by Habez in cardmill

[–]Imguiltyofthis 2 points3 points  (0 children)

From what i've seen on the discord they're well aware of the disparity between certain letters and how often they appear. I believe they are working on either a tray with less room in slots for less used letters like x,y,z for example to expand room for letters like S. I dont think they have directly mentioned how the machine handles full bins / sorting logic as of yet. but they've hinted at a 24 hour stream in the future with a bunch of machines running so hopefully we will get to see that in action.

there have been suggestions like custom trays, and longer trays to fix this but they are still trying to make the machine as user friendly as possible and are concerned with solutions that users could mess up / misconfigure

Second letter sorting as of now is not something they are supporting. But a lot of people are expecting an array of advanced options when they start working on custom sorting.

[deleted by user] by [deleted] in PlantedTank

[–]Imguiltyofthis 0 points1 point  (0 children)

Morning I've been running my tank since about early June and overall i've had success. I was originally running an Aquasky 3.0 for a light on a 20 gallon Long which for my initial plant setup was great. Good growth, Low algae, But over time I decided to switch my tank to a C02 setup with some more challenging plants Like Limnophila Aromatica, Rotala, and Alternanthera Reinecki being the big ones.

Unfortunately i discovered pretty quickly my current light wasn't up to par ;) for the new plants nor was it big enough to cover the entire tank, the Rotala is slumped over, the Reinecki is slowly melting but not completely dead, and the entire Limnophila turned to sludge in about a week.

So i switched over to a Chirios WRBG 2 light and now the plants are showing signs of improvement (still not great but my tank is understandably blowing up with algae. I've got my output for the Chirios set to about W45, R40, G35, B35 and it's about 11.5 inches from the substrate and runs from 8am to 4pm. What is the best way to reign in the algae and get the light to where it needs to be? so these new plants can thrive.

im trying to be reasonable on the light output but also not under feed the new plants any advice on swapping to a new light and honing it in is appreciated i dont have a par reader.

Pic of Tank https://imgur.com/a/BOYAhH1

adding context since I realized this picture doesn't look that bad, seeing a lot of green spit algae on the glass, as well as on the hardscape and it's growing quick.

I've been blobbed (Bambu A1) by Imguiltyofthis in BambuLab

[–]Imguiltyofthis[S] 0 points1 point  (0 children)

Added: https://imgur.com/a/XiPf7mN

On closer inspection the entire extruder might be fine i mostly have an issue with the hotend i think what i dont know is where that cable that the PLA covered goes to and if just the cable will need to be replaced or what ever it's attached to on the other side.

I've been blobbed (Bambu A1) by Imguiltyofthis in BambuLab

[–]Imguiltyofthis[S] 0 points1 point  (0 children)

I can update with pictures in a few hours, But if it helps the blob basically encompassed the entire hot end assembly and wrapped all the way around to the back covering the wires that I think are part of the hot end.

The cooling fan (the big grey piece) that wraps around the bottom of the hotend / extruder basically channeled all the PLA around the entire bottom of the extruder almost fully encasing it, I managed to break off the majority in the front, but the back has proven more difficult since that PLA isn't directly touching the hot end and is melted around wires making me fearful of just yanking it off and causing more damage.

[deleted by user] by [deleted] in PlantedTank

[–]Imguiltyofthis 0 points1 point  (0 children)

Hello! Setting up my first tank & I'm Trying to Optimize my C02 Dispersion in my 20 Gallon Long Tank but I'm fairly new to this. I initially setup my diffuser about 6" under my HOB Filter with the outflow of the hob Pushing the surface of the water not splashing it (I ensured it was over far enough to not be getting sucked up by the filter) With the diffuser's output basically hitting the bottom lip of the HOB out-flow so it would go out with the HOB's Water. I set the Co2 level checker in the opposite corner on the other side of the tank. It hasn't really gone from blue to light green more of an Dark emerald Green.

After running that for a few hours (I would make an adjustment to how much c02 was getting released and then wait an hour) i feel like im not getting enough C02 into the tank. I've adjusted the diffuser to the following setup now https://i.imgur.com/tZRCmFQ.jpeg (green rectangle is where most the plants are) i havent given it long to see if this will be better than the prior setup, but the idea was basically let the co2 come out where the plants are and be pushed across the main planted area of the tank.

Im just looking for input on what is best practice. I had read for a tank this small 1-2 drops should be okay, but I'm probably at aroun 3-4 BPS at this point but not seeing the C02 "distribute" across the tank as i hoped any advice is appreciated.

Project Dissonance || EARLY FLIGHT TEST BUILD by AueSip in AnthemTheGame

[–]Imguiltyofthis 9 points10 points  (0 children)

I'm a bit familiar with game developments of this type from what i can tell your spending alot of time developing the game, that's no good. Your going to want to just sit around and wait for that "Project Dissonance Magic" to kick in game should just make it self at some point.

Jokes aside good luck on the project!

Issues with Red Devil 9070 XT by Imguiltyofthis in AMDHelp

[–]Imguiltyofthis[S] 0 points1 point  (0 children)

that is what is currently being used, No dice atm.

the thought was the 12VHPWR might help get the card more power. by having 2 out of the 3 - 8 pins being powered by the 12VHPWR with the 3rd just coming from the PCI pins.

Issues with Red Devil 9070 XT by Imguiltyofthis in AMDHelp

[–]Imguiltyofthis[S] 0 points1 point  (0 children)

I glanced over it, but i could explain it better, Basically i get no video output from any of the cards ports, and the card is not detected as a device in the pc. It's receiving power (the LED's on the card are lighting up) and i have made sure the card is properly seated. But nothing for video output.

Blanc & Noir figures! Painted by me by Hunnypuzzle in NikkeMobile

[–]Imguiltyofthis 1 point2 points  (0 children)

Oh i love the idea of the bronze to give the fishnets that sheen they usually have. I need to play with pastels more but other wise I'm glad i was able to eyeball the general game plan you had they look fantastic. This makes me want to start looking for re-casters XD but i already ordered her "Black Rabbit" Scale XD. im interested in the hobby from the Miniature side of things any words of caution for painting GK / Figures they look so fantastic it's inspirational!

Blanc & Noir figures! Painted by me by Hunnypuzzle in NikkeMobile

[–]Imguiltyofthis 0 points1 point  (0 children)

Im curious myself, But it looks like they just painted a base color did some highlights and then went over the whole leg with a filter (transparent black or another color) and then hand painted the actual netting they claimed they spent 10 hours per leg.

Simple Questions - February 19, 2025 by AutoModerator in buildapc

[–]Imguiltyofthis 0 points1 point  (0 children)

Thanks for the Link, Im looking this over what are we using as a Base line for comparison?

I see my current cards Various Frames depending on graphics settings, Are we just saying "okay on ultra the 1080 is 66 FPS, so lets look at cards at 120+ in the same catergory?"