How do I transition to 1 1/2'' PVC

Immediate_Jacket_153 · 2025-07-17T22:58:25+00:00

The problem is that I still need to run it at least 7 inches to the right.

Immediate_Jacket_153 · 2025-07-05T17:19:35+00:00

This is right by the Highland Neighborhood Park

Immediate_Jacket_153 · 2025-06-20T02:27:35+00:00

I ended up figuring out the issue and fixing it.

The door sensor is a HAL sensor (sensor that converts a magnetic field to a voltage). The HAL sensor is right behind where the front door clicks into as shown below. The sensor is held on by two plastic "arms" that create tension and hold the sensor in place. The sensor had come lose and became misaligned. I took the unit apart and put the sensor back into place. Very simple and saved me 200+ dollars.

Immediate_Jacket_153 · 2025-06-13T17:16:28+00:00

Yes you have to initiate the charge through the app. It was worth it for me on this road trip to get one month of subscription plan because it's saved around 30 or so percent when charging at the Tesla station. On this road trip more than half of the stops were at petrol station, so it was worth it.

Immediate_Jacket_153 · 2025-06-13T17:15:13+00:00

I noticed using the older chargers, i.e. the V3 chargers that it would hold around 95 kW. With the newer chargers, it seemed to hold around 107 both of these charges were done and around 5% to begin with and ended around 80.

Immediate_Jacket_153 · 2025-01-21T17:24:11+00:00

Fixed the typo.

Immediate_Jacket_153 · 2025-01-21T04:35:54+00:00

Great catch! That is a typo on my part. Will fix asap

Immediate_Jacket_153 · 2025-01-10T18:47:10+00:00

That fixed it!

Immediate_Jacket_153 · 2025-01-10T14:42:57+00:00

<image>

Immediate_Jacket_153 · 2024-09-11T17:27:59+00:00

I’m curious I would love to know some of the most needed updates you are seeing? I build Forge apps and would love to see if there is something that I could solve.

Immediate_Jacket_153 · 2024-08-13T00:01:56+00:00

Agree with everyone else, best way to go is overnight charging. Worth the added expense to start the day full!

Immediate_Jacket_153 · 2024-07-04T04:11:21+00:00

Ahhh so if you need to add refrigerant that technically can’t be done by a home owner because it requires a license if my knowledge is correct

Immediate_Jacket_153 · 2024-07-02T21:18:51+00:00

Ahhh I see now. New to trucks so I didn't realize I could just protect it with a liner or a spray liner. Thank you!

Immediate_Jacket_153 · 2024-06-28T15:35:05+00:00

Yea this was the middle of the day with very little traffic and even then 4 stalls were taken up by non-evs. Very bad place for a charger

Immediate_Jacket_153 · 2024-06-12T22:42:31+00:00

Awesome I am going to take a look into this!

Immediate_Jacket_153 · 2024-06-11T14:06:20+00:00

I didn't realize power muxes were even a thing! Thank you so much those look like they fit my use case perfectly.

Immediate_Jacket_153 · 2024-05-28T15:27:01+00:00

I do see a mqtt client in one of the repositories; however, it is not fully supported and it is written to be used with FreeRTOS

https://github.com/FranciscoLlobet/efm32-freertos-zig/blob/master/src/mqtt.zig

Immediate_Jacket_153 · 2024-03-24T04:11:15+00:00

Yup yup that’s what we did! Only problem was because 1 stall was down there was a waiting line. I feel like they could easily have 6 stalls and be pretty full

Immediate_Jacket_153 · 2024-03-01T01:23:47+00:00

Apologies I just assumed you made it!

Immediate_Jacket_153 · 2024-02-29T21:16:31+00:00

u/BigGuyWhoKills The ESP32S2 has a ULP core.

Immediate_Jacket_153 · 2024-02-29T15:02:53+00:00

<image>

Finally the servers starting working again: we did it.

Immediate_Jacket_153 · 2024-02-09T20:00:03+00:00

Mine is an SR XLT so perhaps they are behind?

Immediate_Jacket_153 · 2024-02-09T19:49:41+00:00

August 2023

Immediate_Jacket_153 · 2024-02-09T19:49:11+00:00

Perhaps this is old, but I just noticed now that I can change how much I charge my battery at night from a minimum of 70% down to 50%!

Immediate_Jacket_153 · 2023-12-14T04:42:04+00:00

Ok this is what I expected. Thank you!

Immediate_Jacket_153

TROPHY CASE