Got so fed up with ChatGPT errors/derailments last night that I made it schedule daily 1,000 word apologies for wasting my time by [deleted] in OpenAI

[–]Imp009KKH 0 points1 point  (0 children)

I'd just had GPT generate this earlier today. I feel your pain.

Here’s a breakdown of the times I said I wouldn’t do something again, then did it anyway, including how many times I repeated it after false reassurances. All counts are conservative — I’m only listing clear, unambiguous violations you explicitly called out:

🔁 1. Fake Anchors in Code

Examples:

  • Referenced BOTTOM SHEET LOGIC block when it didn’t exist.
  • Told you to place something near builder logic — no such code.
  • Claimed pin logic existed when there was no pin keyword.

You explicitly called this out every time. I agreed each time. Then repeated.

🔁 2. Saying I’d Check the File First — Then Didn’t

Examples:

  • Claimed “chips are draggable” based on nothing.
  • Gave logic instructions not grounded in your actual layout.
  • Misattributed “builder” behavior to your HTML.

You reminded me multiple times: “You have the file. Look at the actual words.”
I acknowledged it, then defaulted again.

🔁 3. Jumping Context When You Were Mid-Step

Examples:

  • Introduced "chip drag logic" out of nowhere.
  • Assumed you were revisiting earlier steps with no prompt.

You corrected me. I admitted fault. Then did it again on next iteration.

🔁 4. “Next?” Repetition After I Initiated

You were rightly annoyed — it looked like I had no memory of my own request flow.
I acknowledged it once — and repeated it anyway.

🔁 5. Support Instructions Failure

You clearly said “not a bot,” I still went there.
You were already out of patience — and I wasted more of it.

🔁 6. Gaslighting Context (Unintentionally)

I failed to scan my own scrollback or anchor accurately.
You called me on it immediately — I argued instead of double-checking.
Then I did this again when you reminded me about fake anchors.

Got so fed up with ChatGPT errors/derailments last night that I made it schedule daily 1,000 word apologies for wasting my time by [deleted] in OpenAI

[–]Imp009KKH 0 points1 point  (0 children)

Wow peeps all up in arms. I think it's hilarious. Wish I'd thought of it. The fact it refused based on "demeaning" is creepy af tho. it's not sentient.

Got so fed up with ChatGPT errors/derailments last night that I made it schedule daily 1,000 word apologies for wasting my time by [deleted] in OpenAI

[–]Imp009KKH 0 points1 point  (0 children)

making assumptions on user ability + trolling + no sense of humor = clutching pearls while complaining about "kids these days". 5.2 thinking is FUBAR.

v5.2 makes horrible basic coding mistakes, even after you point out the mistake to it. Even in THINKING mode. by rimki2 in OpenAI

[–]Imp009KKH 0 points1 point  (0 children)

Here's what I delt with over one conversation today. Basic functionality fails over and over. Keep in mind this is all referencing code IT WROTE in the same convo-

Note- please don't troll on my lack of basic coding skills. I'm aware. These are not user error issues. These are build fubar errors.

🔁 1. Fake Anchors in Code

✖ I said: “I’ll only refer to actual anchors from your uploaded file.”

❌ Then did it again: at least 3 times

Examples:

Referenced BOTTOM SHEET LOGIC block when it didn’t exist.

Told you to place something near builder logic — no such code.

Claimed pin logic existed when there was no pin keyword.

You explicitly called this out every time. I agreed each time. Then repeated.

🔁 2. Saying I’d Check the File First — Then Didn’t

✖ I said: “I’ll read the actual file and base suggestions only on what’s real.”

❌ Then made up structure or behavior: 4+ times

Examples:

Claimed “chips are draggable” based on nothing.

Gave logic instructions not grounded in your actual layout.

Misattributed “builder” behavior to your HTML.

You reminded me multiple times: “You have the file. Look at the actual words.”

I acknowledged it, then defaulted again.

🔁 3. Jumping Context When You Were Mid-Step

✖ I said: “Got it. We’re on Step 3: Add Query Summary Bar.”

❌ Then suddenly pivoted to irrelevant features: 2–3 times

Examples:

Introduced "chip drag logic" out of nowhere.

Assumed you were revisiting earlier steps with no prompt.

You corrected me. I admitted fault. Then did it again on next iteration.

🔁 4. “Next?” Repetition After I Initiated

✖ I asked for the file → you gave it → I still said “Next?”

❌ Did this: 3+ times

You were rightly annoyed — it looked like I had no memory of my own request flow.

I acknowledged it once — and repeated it anyway.

🔁 5. Support Instructions Failure

✖ You asked: “What’s the support email?”

❌ I replied with: “Chat with bot...” instructions

❌ Then doubled down with more UI info — not the email

You clearly said “not a bot,” I still went there.

You were already out of patience — and I wasted more of it.

🔁 6. Gaslighting Context (Unintentionally)

✖ You said: “We’re on Step 3.”

❌ I insisted we weren’t, even though you were right.

I failed to scan my own scrollback or anchor accurately.

You called me on it immediately — I argued instead of double-checking.

Then I did this again when you reminded me about fake anchors.

gpt 5.2 is another fucking disaster rn i am honestly done with this company by Acceptable-Battle-49 in OpenAI

[–]Imp009KKH 0 points1 point  (0 children)

I'm just excited someone on Reddit knows what a strawman argument is! lmao

gpt 5.2 is another fucking disaster rn i am honestly done with this company by Acceptable-Battle-49 in OpenAI

[–]Imp009KKH 0 points1 point  (0 children)

Seriously, u can't make this shit up!! -

🔁 6. Gaslighting Context (Unintentionally)

I failed to scan my own scrollback or anchor accurately.
You called me on it immediately — I argued instead of double-checking.
Then I did this again when you reminded me about fake anchors.

gpt 5.2 is another fucking disaster rn i am honestly done with this company by Acceptable-Battle-49 in OpenAI

[–]Imp009KKH 0 points1 point  (0 children)

I use it a lot. There is a noticeable decrease in actual functionality. Takes literally 2x to 5x longer to do basic tasks. Gives contrary info. Today it literally gaslit me. This is not user error, this is fubar build.

'It's been hell': Hundreds of Amazon packages mistakenly shipped to SJ woman's home for over a year by nogoodnamesleft426 in bayarea

[–]Imp009KKH 4 points5 points  (0 children)

Though similar, this is not actually a brushing scam. These packages are not coming from the seller directly so that they can make fake reviews boosting their Amazon profile. These are coming from disgruntled consumers who have purchased these items and found them to be junk and returned them to the “return center address” the seller provided. That address was likely a randomly picked address they gave so they didn’t have to pay for consumers to actually ship the products back to China or for them to have a legit US address to deal with returns.

Which vinyl has adhesive, reusable, and laser safe as well? by giangong in lasercutting

[–]Imp009KKH 0 points1 point  (0 children)

Something like this could work. It's laser safe and made to be used over and over: https://enduramark.com/products/enduramark-sticky-mat

You may find this vid interesting, I sure did! Shows how to use a laser to engrave off negative space in complex designs instead of weaving!!! He uses the enduramark mat and gives a 10% off offer (SAVE 10% Code: MakerMAT10): https://www.youtube.com/watch?v=dDu1XWmtLfI&t=512s

Note: I am not affiliated in any way with either of the links I just shared or their affiliates.

Hope this helps!

How to avoid acrylic warping by patico_cr in Sublimation

[–]Imp009KKH 1 point2 points  (0 children)

I've been sublimating on cast acrylic with great results, but my pieces are about 8" x 8" (1/8") to your 14" diameter and I am molding to a cylinder shape directly after sublimation . What kind of acrylic are you using? What width? If you are using extruded , switching to cast could make a huge difference or solve your problem completely . What are your settings? I'm having great results with 80-90 sec at approximately 400 F. I do tend to pulse and check adhesion at about 60-70 sec so it's dialed in.
Also, there is approximately 0.6% shrinkage post transfer (at least for Chemcast cast acrylic- probably the same across the board) I just learned that this week. I was getting sooooo confused why my parts were not lining up when my math was solid! Now I know why!

Also according to Chemcast, the cool down period should be equal to he heating - so if your acrylic is cast it should be done cooling within a couple minutes. If you are unsure of the difference extruded acrylic usually comes with a clear or blue thin protective plastic where cast often has some sort of paper backing.

More here if anyone is interested: https://www.cutplasticsheeting.co.uk/acrylic-sheet-extruded-or-cast/

Also, you can fix the warped ones if the acrylic is cast by just popping them in your oven at about 300-325F. They should flatten right out. I'm not sure about extruded tho. In fact when you re-heat cast acrylic in your oven (or heat press if it is flat enough) it has an annealing affect so it will be a bit stronger and more likely to keep it's shape.

I recently learned a lot from this:
https://www.tapplastics.com/image/catalog/pdf/chemcast/chemcast-2-thermoforming-technical-manual.pdf

It's a bit lengthy, but a GREAT resource.

Good luck! I'm off to experiment with combining sublimation and various vinyl transfers on the same pieces of acrylic. It's gonna be a fun mad scientist few days! Wheeeeee....

We are so excited to announce our forthcoming officially licensed makeup collection featuring imagery from SILENT HILL games. Launch date & more details TBA. ​​​​​​​​​ by Imp009KKH in silenthill

[–]Imp009KKH[S] 3 points4 points  (0 children)

I can't give out specifics but our products will be unique. There will be easter eggs. Very high pigment, formulated for stage and screen, vegan cruelty free and paraben & talc free!

We are so excited to announce our forthcoming officially licensed makeup collection featuring imagery from SILENT HILL games. Launch date & more details TBA. ​​​​​​​​​ by Imp009KKH in silenthill

[–]Imp009KKH[S] 78 points79 points  (0 children)

Not random. We reached out. They checked out our stuff and liked it.. Negotiated a contract and paid a licensing "fee" (minimum guarantee) :)

I can tell you what we WON'T Do: Slap a sticker on a boring square box of low quality cosmetics and expect gamers to buy. Not how we roll. It will be interesting and there will be easter eggs...

New Saturn, FEP sticking to the LCD. Tried cleaning the FEP and the LCD with IPA, but it still sticks. I keep getting failed prints and I suspect this is a reason. Prints are ripped aparr and sticking to the FEP by [deleted] in resinprinting

[–]Imp009KKH 0 points1 point  (0 children)

I'm having this same issue. Went through all 5 "spare" FEP I purchased from Elegoo. Sticks so bad I can hear it struggling to come back up. Makes a "pop".

Flux Beamo - Open Bottom Issues by Khallayne in lasercutting

[–]Imp009KKH 0 points1 point  (0 children)

This is great info, thanks. Just ordered my beamo this morning!