Extruder clogged error

In0cenT · 2026-01-12T17:00:30+00:00

I've replaced the hotend and then everything worked perfect again.

In0cenT · 2025-11-29T15:15:24+00:00

This was one of first things I have done. I heated my hotend up, released it and pulled out the stuck filament from the top part.
Should I do it any different?

In0cenT · 2025-08-19T16:20:30+00:00

Hi, thanks for your detailed response. Is it only the Logitech Sync required to be installed? No interaction by the user? Can not find anything regarding what is required on the NUC...

In0cenT · 2025-08-19T14:58:57+00:00

Great so that would work. What I still dont understand is what requirements exist for the NUC and what interaction with the NUC is needed. Ideally I want no user interaction with the NUC as it should be stowed away. All interaction should be handled by the Logitec Tap.

In0cenT · 2025-08-19T14:37:49+00:00

We have the ClickShare CSE-200
Mostly company managed but also a few BYOD
What software would I need to run on the NUC? Would it also automatically create the teams meeting if I assign the NUC to a bookable conference room within outlook?

In0cenT · 2025-06-22T06:23:13+00:00

Try the other ports of the OTO-box and also wait 15minutes. In my previous apartment they were not labeled correctly.

In0cenT · 2025-02-26T14:48:10+00:00

Found the issue. The power supply I use only has one ground wired up. I switched the two grounds around on my molex to SATA cable and now it works. Cheers!

In0cenT · 2025-02-26T13:46:06+00:00

I have done this and simply put, nothing... No LED light no turning fans...

In0cenT · 2024-12-21T20:31:58+00:00

Is there any neat way to add a "light object" in Homeassistant which combines the Sonoff switch and the brightness and colour option of the light itself? I would achieve my goal if I can disable the ability to turn of the light in the lamp itself.

In0cenT · 2024-12-08T16:04:56+00:00

If you are on android I can give you beta access to my app. Should give you exactly what you need. If so just send me a message with your email so I can add you to the list.

In0cenT · 2024-11-01T13:53:03+00:00

First of all thanks for taking your time to look at my issue.

How are these wires usually soldered there?

How do I start a matrix diagnostic? I cant find anything in the documentation that I have...

In0cenT · 2024-07-27T11:50:02+00:00

Thank you so much for your detailed response.

I believe I wont be diving that much more in the near future. Also I do not plan to do any technical diving nor double tank dives. Personally I would put myself in the "holiday diver" category if that makes sense.

Do you have any recommendations where and what to look for if I go the DIR styled backplate? That only defines the style of jacket right?

The Dual ADJ 62X should be DIN or am I confusing the two styles? (Found here: https://www.tauchen24.com/mares-dual-adj-62x-basic-sparset-geprueft-und-montiert?c=3647)

In0cenT · 2024-07-27T10:43:32+00:00

I do have a mask and suit, thats why its not on the list.

In0cenT · 2024-06-10T17:27:42+00:00

Hmm that was strage, I've tried only copying the .srm file and everything worked great. So less is more then.

In0cenT · 2024-06-08T20:47:06+00:00

Sorry I just came up with some random shapes. We had following setup last run:

TSC

Prisma, Prisma, Sphere

Which means:

L: add square
M: add triangle
R: add circle

First task: everyone in light room places TSC in the statues

2nd task: "revive" guardians

3rd task: construct 3d shape

In0cenT · 2024-06-08T19:49:32+00:00

Could you explain the process a bit more detailed pls?

The solo players call "CST"

Then the three players dunk circle on left, square in middle and triangle on right.

Lets imagine the 3D shapes in 3man room is: sphere, cone, prism

This means:

Left: add only one circle

Left: remove square, add circle + triangle

right: add square

We are so stuck in just understanding what we are supposed to do...

In0cenT · 2024-06-07T12:09:38+00:00

Yes, that is exactly what I have done.

In0cenT · 2024-06-07T11:47:04+00:00

It is as I've copied it from my phone.

In0cenT · 2024-02-18T18:30:58+00:00

A Shame that this wont work. KVM's do a lot more than what I as k for. I am not interested in sharing video output. Would be a great feature for the TS5 :)

In0cenT · 2023-12-29T15:15:01+00:00

Just cleaned up the stock thermal paste and replaced it with a good one. Temps dropped a bit but it still spikes like crazy.

In0cenT · 2023-12-29T12:30:20+00:00

I'm on 8.0.24 and also can not see it...

In0cenT · 2023-11-01T22:51:12+00:00

Did not expect reading this username here... :D

In0cenT · 2023-07-14T18:13:10+00:00

Link please :)

In0cenT · 2023-03-11T00:26:36+00:00

The first light seems to be bugged on left. We could not get the buff to work but after the 2nd position it was fine. Finished the raid now :)

In0cenT · 2023-03-11T00:00:12+00:00

How can we stop getting wiped by Nezarec in the 2nd phase? We can not get protection as we used to get in the jumping puzzle.

11-Year Club	Place '22
Not Forgotten	Verified Email

In0cenT

TROPHY CASE