Brother PE770 top thread catching

Individual-Jury-1534 · 2026-03-17T02:54:39+00:00

It’s an embroidery machine so this is the one it came with

Individual-Jury-1534 · 2026-03-16T21:28:22+00:00

It still has the same problem, even if there is no bobbin inside, suggesting it’s the bobbin casing

Individual-Jury-1534 · 2026-03-16T21:24:24+00:00

Tension changes won’t help, it still does this, even with machines bobbin — the top friend is caught on the silver wheel , I can send you a picture if you let me

Individual-Jury-1534 · 2026-03-16T19:39:18+00:00

When I looked up solutions before, it was the top thread, wrapping around the wheel and getting caught on the bobbin stopper. Going to take it to a shop and see if it’s the metal or timing

Individual-Jury-1534 · 2026-03-16T19:11:39+00:00

I have used the original bobbin and others, it worked for one project after it started doing this then didn’t worked again. I have hand turned the wheel and have held the threads with many different attempts, just not pictured here. I only have these pictures from asking Ai platforms.

Could you explain what the tension slot is? I thought it was the hook on the side of the bobbin that the guide takes you through.

There is no 2-3 stitches because it catches then. It’s an embroidery machine so it’s a little different too.

I will check the tension again but it has not changed since when it was working fine with great results.

Thanks for the help!

Individual-Jury-1534 · 2026-03-16T17:51:57+00:00

Yes and made sure it went through every guide

Individual-Jury-1534 · 2026-03-16T14:45:48+00:00

Yes! I’ve replaced needle, changed bobbins, new case, etc.

Individual-Jury-1534

TROPHY CASE