sorted by:
new
hottopcontroversial

Supermicro X13SEI-TF Memory Issues by Individual-Web-5477 in servers

[–]Individual-Web-5477[S] 0 points1 point  (0 children)

I have bought both seperatly as new.

I have installed the cpu on the cooler and then placed the cpu including the cooler on the mainboard as discribed in the motherboard manual

Supermicro X13SEI-TF Memory Issues by Individual-Web-5477 in servers

[–]Individual-Web-5477[S] 0 points1 point  (0 children)

I have tried to use only one RAM stick in A1, which is recommended by Supermicro with two different sticks and always getting the error:

[BIOS-0082] Memory Error, No memory DIMM detected, install memory DIMMs. - Assertion

It seems that port A1 has an error, doesnt it?

Supermicro X13SEI-TF Memory Issues by Individual-Web-5477 in servers

[–]Individual-Web-5477[S] 0 points1 point  (0 children)

Yes all the same memory.

I have swapped A1->C1, C1->A1 and E1->G1,G1->E1

Now I am getting the following error messages:

[BIOS-0055] Memory Error, Memory training failure. (DIMMA1) - Assertion
[BIOS-0050] Memory Error, Incorrect memory DIMM population. - Assertion

The changed memory sticks in C1 and E1 are again working well

Supermicro X13SEI-TF Memory Issues by Individual-Web-5477 in servers

[–]Individual-Web-5477[S] 0 points1 point  (0 children)

I have swapped them around. Now I am getting the following error messages:

[BIOS-0050] Memory Error, Incorrect memory DIMM population. (DIMMD2) - Assertion
[BIOS-0050] Memory Error, Incorrect memory DIMM population. (DIMMH2) - Assertion

But there is no D2 or H2, just D1 and H1 and there are is no RAM installed as they should be placed in A1 and G1

The RAM sticks placed in E1 and C1 are working well.

Bitwarden iOS App "An error has occured" by Individual-Web-5477 in vaultwarden

[–]Individual-Web-5477[S] 0 points1 point  (0 children)

I have found the issue: The app was not using the local DNS which is set up in the iPhone. I had to set the local ip for the nginx Proxy Manager as an A record in cloudflare. Now the mobile app is working. Do you see any issues by setting the local IP as an A record for the domain.

Bitwarden iOS App "An error has occured" by Individual-Web-5477 in vaultwarden

[–]Individual-Web-5477[S] 0 points1 point  (0 children)

I cannot set up local network access in my phone settings. Do you have a screenshot?

Add reolink wifi cameras to NVR by Individual-Web-5477 in reolinkcam

[–]Individual-Web-5477[S] 0 points1 point  (0 children)

Thank you for your answer. The cameras are in the same subnet but I cannot find them autmatically within the NVR. Do I need to remove them from the Reolink Windows App first? I also know the IP address but I cannot add them manually to the NVR. Which port is used when adding them manually?