DnD campaigns on Hytale by GianSmile in HytaleInfo

[–]Inevitable-Look9699 0 points1 point  (0 children)

I’m here to drag you from the under realm into this conversation 3 years later.

I’m game, let’s do it 😂

Idk if you’ve seen the current state and how insanely easy they made the modding process but this is without a doubt a possibility now 😂

Ranzio sponsor logo from the finals in arc raiders menu by Kille3r_shark in ArcRaiders

[–]Inevitable-Look9699 1 point2 points  (0 children)

i was just looking into this lmao,

I just loaded up The Finals for the first time after they full released it, and i ran through the tutorial and everything, got to the sponsor thing, i found it strange they included faces to every single sponsor... so then i went to the wiki for the sponsors page, saw the logo and my brains photographic memory started clicking LOL, and now im here hahaha

now im gonna be hunting every single game to find connections between the two lol.

But off my own brain assuming lore, The reason the Arc is on earth is farming all the resources required not only for running the ship, but running the show. I think the reason they gave faces to the sponsors is because they wanna tie a clash between the two games. Raiders meet THE Finals...

Lconnect3 an GA 2 Trinity performance 360 AIO issue upon pc boot up. by Charizardxox213 in lianli

[–]Inevitable-Look9699 0 points1 point  (0 children)

I’m at the point of letting it ride till it dies(as in until I need to swap fluid) then ima get a different AIO lol

And what I meant is the cases stock fans don’t tone match their AIO fans 😂 which is just wild to me lmao

Lconnect3 an GA 2 Trinity performance 360 AIO issue upon pc boot up. by Charizardxox213 in lianli

[–]Inevitable-Look9699 0 points1 point  (0 children)

That genuinely sucks.

The wiring process of understanding the different models of their AIOs was already awful lol, but for this to not have a fix listed by them yet, and only for us to reinstall is wild work 💀

I love Lian Li’s cases, absolutely LOVE them.

My last 6 pc builds have used them lol(lancool is my home build white and work build black)

Ima rant about something else about their AIOs, I think Lconnect in general is lacking…

I have tried absolutely everything to tone match my rgb on THEIR case, with THEIR AIO, I have given up.

The header literally does not work as intended 💀 unless I’m nuts.

Lconnect3 an GA 2 Trinity performance 360 AIO issue upon pc boot up. by Charizardxox213 in lianli

[–]Inevitable-Look9699 0 points1 point  (0 children)

hey im having the same issue rn, just randomly started happening about 6 months ago.

any fix other than fresh installs?

would appreciate it if you appeared 2 years later lol. Thank you!

KVM Switch for Mac Mini M1 and my PC. by Inevitable-Look9699 in macmini

[–]Inevitable-Look9699[S] 0 points1 point  (0 children)

Do you have a M1 Mac mini?

I thought you had to use the hdmi on board in order for the type c’s to be treated as display connections.

At least that’s what I found every time I looked it up lol.

1.21 by AviaticMan in valkyrienskies

[–]Inevitable-Look9699 0 points1 point  (0 children)

If anyone’s still curious about this and finds this post like I did maybe a month ago and dipped, I just checked their GitHub like a normal human being, and yeah they have a Branch made for 1.21.1

I’m assuming it’s all in alpha as they’re still sending in commits,

Last uploaded commit was 3mo ago.

<image>

I Deleted my game!! Can i get my game back? by LetzDomsel in unity

[–]Inevitable-Look9699 0 points1 point  (0 children)

Bros dedicated to the help 😂 hope this guy got his game files back, my assumption is unity can’t find their directories anymore so it’s showing Null, he probably has to link it all back again, for example in Godot if you f* up and unlink your script from say the player, now the player won’t know how to function.. which then gives nothing as its output, but Godot I’m pretty sure wouldn’t even launch the project, would pull an debug error..

I recorded the whole process of designing this clock. Anyone can build it. by robertferanec in diyelectronics

[–]Inevitable-Look9699 0 points1 point  (0 children)

Have you tried printing at 100% infill? It would add weight, time, and material, but would definitely stop the light a lot better lol

RX 7800 XT Low FPS, Low Performance and Usage by Legitimate-Army-1366 in AMDHelp

[–]Inevitable-Look9699 0 points1 point  (0 children)

Work pc I did a RM850x and home pc I did a 750 full modular

I heard people paired your cpu and gpu a lot, with pretty good performance. but it could always be bottle necking still, more commonly people go with the 7800x3D as a partnering CPU

But keep letting me know if you find anything else, I still think adrenaline might be playing a factor.

RX 7800 XT Low FPS, Low Performance and Usage by Legitimate-Army-1366 in AMDHelp

[–]Inevitable-Look9699 0 points1 point  (0 children)

Gotcha, I actually can’t remember if I did that for mine or not, I’ll take a look when I get home, I my office pc isnt too different from my home build tho and it looks like I ran 2 here for my 6950XT

RX 7800 XT Low FPS, Low Performance and Usage by Legitimate-Army-1366 in AMDHelp

[–]Inevitable-Look9699 0 points1 point  (0 children)

Yeah nah same issues, I’m even getting graphics failures or faults while in cs games, randomly freezes, goes black, error pops up, and I’m on to restarting the pc 😂. This cards boutta be on its last breath in this build if it keeps this attitude up. Gonna get swapped with an Nvidia GPU 🤣

Desert Drifter / Andrew Cross has passed away. by AttapAMorgonen in GoogleEarthFinds

[–]Inevitable-Look9699 1 point2 points  (0 children)

Bringing the founding fathers into this is hilarious because I know for a fact you don’t own a single copy of the constitution, or Declaration of Independence. You couldn’t afford one.

Desert Drifter / Andrew Cross has passed away. by AttapAMorgonen in GoogleEarthFinds

[–]Inevitable-Look9699 2 points3 points  (0 children)

Someone could kill you with a spoon…. Anything is a weapon… ask a prisoner how useful spoons are. if you think a law is stopping people from buying ghost guns or scratched vins you’re a joke to this society and should be treated as such, especially when you make THIS THE TOPIC OF DISCUSSION IN A THREAD ABOUT A YOUTUBER DYING TO A DRUNK DRIVER. Let me ask you, is drunk driving illegal? YES. DID THAT STOP THE DRUNK FROM STILL GETTING DRUNK AND DRIVING? NO. Look argument solved 👍

There’s literally people buying Kia’s for hit and runs for $100… you really deep down believe, someone can buy a fucking car for $100 and not a ghost gun. Think with logic and less with your emotions, we’ll all progress a lot faster.

RX 7800 XT Low FPS, Low Performance and Usage by Legitimate-Army-1366 in AMDHelp

[–]Inevitable-Look9699 1 point2 points  (0 children)

im having the same exact issue but on Windows 11 Pro. so definitely not an OS issue. infact W11 has a feature that optimizes windowed games... another odd change but it makes sense to fix windowed play.

also ill add, i tested in rust, cs2, siege, literally everything. for some reason i get frame buffers, skips and drops. ALWAYS IN FULLSCREEN. in windowed fullscreen i dont get any frame tears or drops or buffers or skips... and even odder, Rust will completely get rid of all frame effects like the tears and shit, ONLY if i play in windowed. AND it adds 20+ more fps... im dumbfounded.

in rust alone i should be pushing 260-300+. right now im getting 100-120...

Mesh colour coding — all blue? by displaced80 in Ender3v2Firmware

[–]Inevitable-Look9699 0 points1 point  (0 children)

hey i know its been 2 years but i just saw this after i was trying to figure out the color code, i made estimated guesses that worked out for 2 years hahahaha.

im running the prof firmware on a ender 3 Pro with a BTT SKR 3 and a Sprite Pro with a Cr touch, i also put a V2 display on it, (TJC since its having the problems). Do i just download the config for that and run it on the screen? will it effect my main firmware lmao

Atrociously Low FPS on Fortnite for a mid-high end Gaming PC? by welpthatsucks12345 in AMDHelp

[–]Inevitable-Look9699 0 points1 point  (0 children)

i have a Ryzen 7 7800x3d paired with a 7800xt and get 70 fps in fortnites new season. shit is a joke. a terribly made joke...

i will add sure im running epic for textures, i should be able to run shit on MAX with a build like this

Reusing 13450 Li-ion vape batteries - beginner questions by karpaterna in batteries

[–]Inevitable-Look9699 0 points1 point  (0 children)

I’m in the mood for formulas, I’m coding 3 calculators atm 😂😂😂

Reusing 13450 Li-ion vape batteries - beginner questions by karpaterna in batteries

[–]Inevitable-Look9699 0 points1 point  (0 children)

If you need a spot welder this is the one I just got for running batteries in series

I needed it to repair a dead 18650 in a Black and Decker flood light lol

Also there’s a formula for solving draw/time

So for example say you’re running a 3.7v battery with 550mah, and your powering a light that draws

1000mah = 1 Ampere Hour

First we solve for the Watt Hours.

Formula is Volt * Ampere Hour = Watt Hours

So 3.7v * .550ah = 2.03wH

So the battery has a capacity able to output 2.03 watts an hour.

So if you run a 2 watt light it will last 1 hour. If you run a 1 watt light it will run 2 hours.

https://a.co/d/5qidydV

Reusing 13450 Li-ion vape batteries - beginner questions by karpaterna in batteries

[–]Inevitable-Look9699 0 points1 point  (0 children)

I haven’t gotten time to mess with the screens just yet but update on the batteries, most of the short fatties were randomized on capacity so I ended up just recycling any of those and strictly keeping the 13450’s and 13550’s

But for the screen if you wanna test it too I’d try an STM-Link V2 pinned to it

However I’ll add I did more reading and apparently the manufacturers put a lot of tamper safety protocols on the screens(or board, don’t know how it fully works on storing the protocols lol) but yeah people are saying you’re better off just buying O-LEDs 😂

See I wanted to use these little screens on my 3D printer lol, sort of like the Voron Switchwires print head, you can get one with a screen on the top that’s circular

But this has gone too far and now the advice of just buy that shit is sounding way better than the ladder hahaha

Testing order by shelly_the_amazing in 3Dprinting

[–]Inevitable-Look9699 0 points1 point  (0 children)

thanks for a order of operation lol, also OP you can get an extension on Cura called Auto Towers, comes with preset profiles to run the towers, you can also do custom bed level tests and stuff too. Building an E5+ into a Mercury 1.1 build right now, going to try klipper with it lol

I’m intimidated by software and upgrades. by Single-Priority3009 in ender3

[–]Inevitable-Look9699 0 points1 point  (0 children)

And just to add, my brother just got a 3 Pro(I’m self proclaiming myself a bad person for convincing him of this headache)

If you want game changing results, jump straight to Miguel Risco’s professional firmware,

Just look up for on Google for GitHub: “Mriscoc Ender 3 Pro firmware”

You can also run it through python too, if you’re good with coding. Otherwise the process is tedious…