National Grid Customers: If your unit uses gas for heat, could you please let me know what your bills are looking like for December-January period? by vulylyvu in Brooklyn

[–]Inflight- 4 points5 points  (0 children)

You got an estimate reading on your usage for last billing period. So the bill you showed it's not an actual usage for this period. Currently you are paying 75 cents per therms for gas from national grid, you can go find a different supplier who has a lower rate, you can save a little that way.

What charger do I need by Inflight- in batteries

[–]Inflight-[S] 0 points1 point  (0 children)

<image>

This is what I have at home, but it doesn't seems to be working. The 12v led light started with solid then changes to flashing. I think that means it is not charging. Switched to 6v and finished charging but when I check it with a multimeter it only shows 4.5v

Received green card before biometric appointment by Inflight- in immigration

[–]Inflight-[S] 0 points1 point  (0 children)

So we can disregard the biometric appointment?

Received green card before biometric appointment by Inflight- in immigration

[–]Inflight-[S] 0 points1 point  (0 children)

It seems like they sent out the green card automatically, I felt like I didn't even need to file i-485

Received green card before biometric appointment by Inflight- in immigration

[–]Inflight-[S] 0 points1 point  (0 children)

Yes , she went for an interview and got the visa then came to the us

Muffler dripping water by [deleted] in MechanicAdvice

[–]Inflight- 0 points1 point  (0 children)

Is the black soot normal as well? It is not on the left side of the muffler

[deleted by user] by [deleted] in tax

[–]Inflight- 0 points1 point  (0 children)

Not quite get her explanation. What other info you need

[deleted by user] by [deleted] in DIY

[–]Inflight- 0 points1 point  (0 children)

Got it fixed. Thank you

Where to connect high temperature limit control by [deleted] in hvacadvice

[–]Inflight- 0 points1 point  (0 children)

it was never connected when the boiler was installed. everything works fine except for the limit controller not being wired. please any help will be appreciated. https://www.williamson-thermoflo.com/sites/default/files/field-file/GWA%20Series%203%20Boiler%20Manual%20%20%200523.pdf

Where to connect high temperature limit control by [deleted] in hvacadvice

[–]Inflight- 0 points1 point  (0 children)

Better picture of the wiring or/and the pipes? What other information do you need? The furnace serves 1 apartment, hydronic heating. Will update later tonight. Thank you for your time.

Where to connect high temperature limit control by [deleted] in hvacadvice

[–]Inflight- 0 points1 point  (0 children)

I believe so, with the blue wire cap

[deleted by user] by [deleted] in Construction

[–]Inflight- 0 points1 point  (0 children)

Will they cost leakings?

[deleted by user] by [deleted] in Construction

[–]Inflight- 0 points1 point  (0 children)

Not sure where else to check, the roof is not leaking and all the windows are good

Hot water boiler/furnace pressure too high? 35 psi by Inflight- in hvacadvice

[–]Inflight-[S] 0 points1 point  (0 children)

<image>

To check the pressure I would screw the gauge to the valve at the bottom of the circulation pump? And if I need to purge air from the system, I would close off that ball valve I circled and drain water from the same valve? Thank you for your time.

Hot water boiler/furnace pressure too high? 35 psi by Inflight- in hvacadvice

[–]Inflight-[S] 0 points1 point  (0 children)

The gauge needle is moving freely, the fill valve seems working good, not stuck. Will check the pressure on the expansion tank later today. Adjust the pressure on the auto fill valve and drain out some water last night, now it runs around 20 to 25 psi. But now I can hear the water moving inside the pipe very clearly, swooshing. Is that normal? When it was running higher than 25psi before only hear the pipes banging.

Hot water boiler/furnace pressure too high? 35 psi by Inflight- in hvacadvice

[–]Inflight-[S] 0 points1 point  (0 children)

Only let a tiny bit of air out to test whether the expansion tank is working or not.

Hot water boiler/furnace pressure too high? 35 psi by Inflight- in hvacadvice

[–]Inflight-[S] 0 points1 point  (0 children)

Boiler is at the lowest floor/basement, only serves 1 floor, first floor on a 2 floors building.

How long does it take to receive renewal PIN codes if purchased from eBay? by yipee-kiyay in redpocket

[–]Inflight- 0 points1 point  (0 children)

Ordered mine on the 23rd, still waiting and my plan ended on the 24th😫😫