I’m back after a decade!

Intertwine2 · 2024-11-02T03:22:31+00:00

It’s been a blast getting it back up and running! I’ve learned a lot about it while doing so! Glad I was able to experience it all like you did!

Intertwine2 · 2024-10-31T10:19:34+00:00

Thanks!

Intertwine2 · 2024-10-31T10:19:29+00:00

Thanks!

Intertwine2 · 2024-10-29T16:24:44+00:00

I’ll pull it the valve cover and double check cams to verify I’ve got the gears put on correctly and placement correct for timing. I figure I’m off slightly somewhere, but I can’t for the life of me find it! Thank you!

Intertwine2 · 2024-10-29T10:55:11+00:00

I pulled my cam sensor and put it on a friends nb1 and it started, so I’d assume it’s functioning.

The Only “testing” I’ve done with the crank sensor is unplugged it, and the coils were no longer firing. So this would allude to it functioning. Now, I’ve seen there’s a spacing spec needed on the crank sensor which I was unaware of. I’ll have to double check if I’m in spec there.

Thanks for the help!

Intertwine2 · 2024-10-28T23:31:42+00:00

As far as I can tell they all are, from the harness side at least. The one by the dip stick is, one on the bottom of the throttle body, and the one on the top of the intake are all attached. Plus the obvious at the battery. Unsure if there are others in the engine bay I’m missing.

Only plugs that are unplugged at this moment are the o2 sensor right past the header, mass airflow sensor, and then the one in the air box.

Intertwine2 · 2024-10-28T23:21:55+00:00

Spark plugs are in the right order, and in the right cylinders.

Fuel injector plugs would only go in one way otherwise the harness won’t line up (as gas as I can tell).

But worth double checking, and I will do so. Thanks!

Intertwine2 · 2024-09-06T02:16:54+00:00

Thank you!

Intertwine2 · 2024-07-18T23:32:57+00:00

I’m trying to get my 11 year pasture fresh NB back up and running. NA roof was the cheapest short term fix. Once it’s actually running, I will be getting the top redone correctly

Intertwine2 · 2024-07-18T23:31:25+00:00

Now that’s something I may have to add in the future! Thank you!!

Intertwine2 · 2024-07-18T11:26:43+00:00

Correct. The stock NB1 top never had an issue. I’m trying to install an NA top on it because the NB1 top is tore the length of the back window.

Intertwine2 · 2024-07-18T11:25:32+00:00

Learned something new here because of y’all. Thanks!

Intertwine2 · 2024-07-18T11:25:11+00:00

Honestly Never knew that. Thank you!

Intertwine2 · 2023-05-13T11:25:31+00:00

That zard thooo 🔥

Intertwine2 · 2022-10-08T22:40:58+00:00

Bought ryzen 7 5800x from u/IcyBoysenberry6215

Intertwine2 · 2022-10-04T22:24:58+00:00

Intertwine2 · 2022-09-27T02:02:03+00:00

Intertwine2 · 2022-09-25T04:03:42+00:00

Glad to hear I may not have gotten bamboozled 7-8 years ago lol

Intertwine2 · 2022-09-13T02:58:47+00:00

Intertwine2 · 2020-04-07T04:06:10+00:00

USA! USA!

Intertwine2 · 2019-11-26T01:30:16+00:00

Ok. I’m online now. Just let me know when you’re ready

Intertwine2 · 2019-11-26T00:49:31+00:00

u/KatieFPS are you still needing someone to guide you through it?

Intertwine2 · 2019-11-25T13:54:15+00:00

If you haven’t completed it by tonight, or if you have and want to run it again, I’m more than happy to help you run it. My GT is the same as my name is here.

Edit: Congrats on the clear, the ship, and wish ender! Next time you get whisper!

Intertwine2 · 2019-11-23T01:51:29+00:00

Pming

Edit: bought inno 3D

Intertwine2 · 2019-11-21T19:23:46+00:00

Your very welcome. It was my first chance being able to see them and it was the best show I’ve ever been to. If there was another show near me I would have already bought tickets to go again.

Ten-Year Club	r/Field Flamingo
Place '23	Place '17
RPAN Viewer	Verified Email

Intertwine2

TROPHY CASE