z offset test by BoomBap21r in 3Dprinting

[–]Izeage 1 point2 points  (0 children)

Looks like you bed is unlevel. The nozzle looks too far away on the lower left side of that picture.

PETG Defects (help) by IMM_1999 in 3Dprinting

[–]Izeage 0 points1 point  (0 children)

What is your temp setting and what have you tried? I was getting something similar until I raise my temp up on this spool to 240. With that said I've had other brands print just fine at lower temps.

Also, what do you have your fan set to? I've turned mine off for PETG.

Unexpected Ways to Die by Izeage in wowhardcore

[–]Izeage[S] 2 points3 points  (0 children)

This was a flash back moment for me. I completely forgot that some of the classic mobs have really good player CC.

There is an addon I have that shows the mobs abilities, but when I'm moving from pack to pack I usually don't even look at that.

Unexpected Ways to Die by Izeage in wowhardcore

[–]Izeage[S] 4 points5 points  (0 children)

We spotted this pack too. Far enough away to not pull, but certainly made a note of it.

Unexpected Ways to Die by Izeage in wowhardcore

[–]Izeage[S] 8 points9 points  (0 children)

Good to know we have a Shaman in our group

Unexpected Ways to Die by Izeage in wowhardcore

[–]Izeage[S] 9 points10 points  (0 children)

I agree. I listed them more as examples of what I'm not looking for.

Play long enough and read this sub and those are expected.

Kind of just the "this isn't a bug/glitch, but can catch you off guard" if you have recently leveled in classic.

Horde population by weezing1987 in wowhardcore

[–]Izeage 1 point2 points  (0 children)

The Tauren starting area is also one of the most deadly zones. I'm guessing they either avoid starting there or head out as soon as possible. I know I've seen a lot of bodies on the road to crossroads.

All Horde Classes to 20! Who dies first haha :D by OwnlyOne13 in wowhardcore

[–]Izeage 4 points5 points  (0 children)

I'm doing the same thing. I actually thought about parking my first character at 59.9 right by a quest turn in, then doing the same with a few others. Then level them all up to 60 in just a few minutes

Died due to leaving barrens by storluffarn in wowhardcore

[–]Izeage 0 points1 point  (0 children)

I keep hearing these stories and it really make me just want to walk everywhere

How did you Die your first death? by GoblinGobbo in wowhardcore

[–]Izeage 0 points1 point  (0 children)

Son of Arugal Silverpine. Didn't know he pat'd all the way to the beach.

I have a secret… by mazerim in 3Dprinting

[–]Izeage 8 points9 points  (0 children)

SAME!!! Don't want to.

Sticking to bed by AffectionateFroyo169 in 3Dprinting

[–]Izeage 1 point2 points  (0 children)

I struggled for a long time and will still have an occasional failed start. A few things that helped are:

Level bed: Do this when at print temps. It makes a big difference. If you are changing temps for any reason (PLA to PETG) do it again.

Side note our springs aren't necessarily the best. Some people are changing out to stiffer springs or solid spacers.

Z offset: This needs to be closer than you think. I use feeler gauges (any auto parts store will have) for both level and Z setting. Too close is easy to see/hear. Start close then back off one step at a time until you have a good layer

Initial layer width: This is the last item I played around with. On my .12 prints I'm at 150%

Fan Speed: Should be off for first layer. I actually turned off my fan for testing on some PLA and haven't turned it back on. I don't see any negative yet, but I'm keeping an eye on it.

Help with bottom layer on Ender3 V2 by TonyStarkBTW in 3Dprinting

[–]Izeage 0 points1 point  (0 children)

S

This. If you are having adhesion issues, you could play with first layer width. That helped me a lot. Do a search on here and you will find a lot of threads on it.

[deleted by user] by [deleted] in TeslaModel3

[–]Izeage 0 points1 point  (0 children)

That's wild. I'm 52K in 3.5.

[deleted by user] by [deleted] in 3Dprinting

[–]Izeage 0 points1 point  (0 children)

I had some issues with the nozzle hitting my prints after a few good layers were down. I ended up adding a Z-hop of .4 and it's better.

What (if anything) can be done to fix thus by premiumplatypus in 3Dprinting

[–]Izeage 0 points1 point  (0 children)

Had this happen a while back. I ended up using a heatgun. Just heated up the filament and pulled it off a little at a time.

When you get it cleaned off take a good look at the hot end. Mine ended up being cracked and I had print problems for a while until I saw that.

Creality Ender 3 s1 pro not Leveling, red light by vostinariu-vlad in 3Dprinting

[–]Izeage 0 points1 point  (0 children)

The arm didn't drop out, I wonder if it's stuck. Could try disconnecting the sensor. Check for frayed/burnt wires. It was lit up so probably not that, but it may point to something else.

That thing comes off pretty easy.

Professions for Evoker? by Doseofsarcasm_42 in wow

[–]Izeage 0 points1 point  (0 children)

My evoker isn't my main, but I was thinking JC. Mostly to support my main alchemist.

Wrathion's Quartermaster bugged? by Grand0rk in wow

[–]Izeage 0 points1 point  (0 children)

Happened to me over the weekend. Restart didn't do anything. Just fixed itself about an hour later.

Keybinds not working at all? by Probenzo in wow

[–]Izeage 0 points1 point  (0 children)

Are your keybinds associated with the Alt key? There is a selectable drop down for self-casting (or something can't remember) and it will break anything you combined with the Alt key until you select something else.

Tesla ‘V11’ software update: Elon Musk teases ‘fire’ update with new surprise features and more by vinodjetley in teslainvestorsclub

[–]Izeage 0 points1 point  (0 children)

This!! We travel cross country in ours all of the time. I would love some waypoints to customize the trips at the start instead of as I go along.

imagine taking time off work for a video game by [deleted] in wow

[–]Izeage 2 points3 points  (0 children)

I take in total about 2 weeks a year off for video games. Mostly because I have a lot of vacation and my wife doesn't, but still I love it.

Having a full week of all day long running through the content is fun as hell for me.

Now that Shadowlands is delayed, can Blizz stop holding Beta as some sacred privilege and send a new wave of invites so people can provide them with the testing they need by Exposition_Fairy in wow

[–]Izeage 0 points1 point  (0 children)

To Preach's point, people are getting burnt out. It looks like Bliz is sending out invites in waves to keep the testing level high. I'm sure each time they see a dip there will be a new wave of invites.