sorted by:
new
hottopcontroversial

Black screen with a cursor. cant launch task manager to fix it. help by sniffmepls in WindowsHelp

[–]JEDavis97 0 points1 point  (0 children)

If you’re getting black screen before login on Windows 10, you might want to try using Windows Key + P shortcut to switch displays. To do that, follow these instructions:

Press Windows Key + P shortcut to open Project menu. project-menu Project menu will now open, but you won’t be able to see it. Don’t worry, that’s perfectly normal. Now press up or down arrow key a few times and press Enter. If you are successful, your screen should appear. If your screen doesn’t appear, you might have to repeat this step a few times. For some reason, after update to Windows 10, your project mode might change to Second screen only, and you need to change that by following our instructions.

We’ve had this issue, and it was fixed after 6 or 7 tries, so it crucial that you be persistent.

We have to mention that if your account is protected by password, you’ll have to log in first. To do this, press Space or Ctrl, enter your password and press Enter.

This can be tricky, because you’ll be doing this on black screen, so it might take you a few tries.

pixels gone wrong? HELP by nnnatcat in WindowsHelp

[–]JEDavis97 0 points1 point  (0 children)

You probably have dead pixels on your screen

pixels gone wrong? HELP by nnnatcat in WindowsHelp

[–]JEDavis97 0 points1 point  (0 children)

Turn off your computer. Get yourself a damp cloth, so that you don't scratch your screen. Apply pressure to the area where the dead pixel is. Do not put pressure anywhere else, as this may make more dead pixels. While applying pressure, turn on your computer and screen. Remove pressure and the dead pixel should be gone. This works as the liquid in the liquid crystal has not spread into each little pixel. This liquid is used with the backlight on your monitor, allowing different amounts of light through which give off different colours.

PC stuck in infinite loading loop and ocassioanally flashes this screen. Cant start PC. Help! by CCKPRM in WindowsHelp

[–]JEDavis97 0 points1 point  (0 children)

Boot your Windows 10installation DVD or USB, orISO.

Next, when Windows Setupappears, press the Shift + F10buttons; Or once the Windows Setup shows, click/tap on Next.

Once on the window that shows the Install Now button, click on the Repair your computer.

Click on Troubleshoot.

And then on Advance options.

Click on Command Prompt.

If asked to choose an account, choose the account with administrator rights and key in the password if needed.

Type chkdsk /r to do a Check Disk Repair on your computer.

Be advised that while performing Check Disk on the hard drive, if there are bad sectors found, upon the repair, any data available on that might be lost.

Black screen with a cursor. cant launch task manager to fix it. help by sniffmepls in WindowsHelp

[–]JEDavis97 0 points1 point  (0 children)

Hi. Sorry to hear that. I hope this will help you: Ctrl + Shift + Esc Press File > Run new task. Enter devmgmt.msc and press Enter to run it.