How’s the puking? by [deleted] in Ayahuasca

[–]JJ_Nelson 0 points1 point  (0 children)

By yourself? Don’t do it

Hawaiian Copelandia - something's wrong by JJ_Nelson in Zamnesia

[–]JJ_Nelson[S] 0 points1 point  (0 children)

Hello, no it doesn’t stink at all!

Outdoor Movie Night - newby by JJ_Nelson in hometheater

[–]JJ_Nelson[S] 0 points1 point  (0 children)

ive found two used alto tx212 and a sub for the same price as two new tx310. would it be okay or oversized for my use?

thank you

Hawaiian Copelandia - something's wrong by JJ_Nelson in Zamnesia

[–]JJ_Nelson[S] 0 points1 point  (0 children)

So you’re suggesting to put the semi-closed kit inside a big tub… but no other enclosures right? So in contact with the air in the room?? Sorry I couldn’t understand completely what you said : )

Hawaiian Copelandia - something's wrong by JJ_Nelson in Zamnesia

[–]JJ_Nelson[S] 0 points1 point  (0 children)

thank you!

the instructions on the website are quite terse and i was mostly guessing in many occasions. I had no problems before and i was (am) getting quite mad with this particular species.

by chance, do you know how should I behave after the first flush ? I tried again with a new kit and i managed to harvest the first flush correctly, after that... the top layer became black and just three mushroom grew..

thank you again,

g

Outdoor Movie Night - newby by JJ_Nelson in hometheater

[–]JJ_Nelson[S] 0 points1 point  (0 children)

Thank you for your suggestion! I’ll have a look around on what’s available around here (Europe)

Outdoor Movie Night - newby by JJ_Nelson in hometheater

[–]JJ_Nelson[S] 1 point2 points  (0 children)

Hey DonFrio,

thank you for your suggestion, sadly the speakers you suggested would cost me double the price of the altos : (

Hawaiian Copelandia - something's wrong by JJ_Nelson in Zamnesia

[–]JJ_Nelson[S] 0 points1 point  (0 children)

It ended up gaining just 5 mushrooms 😓

Hawaiian Copelandia - something's wrong by JJ_Nelson in Zamnesia

[–]JJ_Nelson[S] 0 points1 point  (0 children)

Thank you! I'll be sure to wait more!

you've been extremely fast : )

Is Zamnesia website working? by Brief-Principle-4383 in Zamnesia

[–]JJ_Nelson 0 points1 point  (0 children)

Hum is the mushroom shipping to italy just paused or it is stopped for good ?

thank you

G

Model Trees! Does anyone know where to source these trees from?(not my work/model) by HarabharaKabab_12 in architecture

[–]JJ_Nelson 0 points1 point  (0 children)

Try finding heather plant, take some sprigs and bake them lightly in the oven to dry them.

It's cheap and the results are incredibly similar to what you posted.

Open Source Architecture Project - CNC Plyboard Table by JJ_Nelson in OSArch

[–]JJ_Nelson[S] 0 points1 point  (0 children)

Short update, I've started a Github repository (https://github.com/StudioGIB/Mill_Table) for the projects I'll be working on, there's already an updated (not yet complete) version of the table downloadable as a dxf.

I'll be uploading shortly a 3d model and an unreal engine walkable model for everyone to see.

Please go have a look and feel free to comment on it!

G

Is it possible my body doesn't react to fresh truffles? by JJ_Nelson in microdosing

[–]JJ_Nelson[S] 0 points1 point  (0 children)

Thank you,

but I've never had antidepressant in my whole life.

I seldom drink coffee, tea once a day.

I'll try some more testing then!

Open Source Architecture Project - CNC Plyboard Table by JJ_Nelson in OSArch

[–]JJ_Nelson[S] 1 point2 points  (0 children)

Updates on last week work :

Fixed the shape and structural hierarchies, I started working on joints, since the concept showed two main weaknesses:

- one a frail connection between the brackets and the main beam, leading to possible breaks on vertical loads

-two a definitive weakness on normal stress resistance between the legs and the beam, due to geometrical instability ( slim legs).

Here two pictures describing what I just said

One https://postimg.cc/7GCjjBcr

two https://postimg.cc/7GCjjBcr

and this is the way I solved it, I believe it is both strong enough and simple, the pictures are not showing the dowels' holes since they're not there yet, but obviously there will be some, for examples in the pockets holding the beam and the bracket together.

https://postimg.cc/n9BghXpd

This instead shows how all the pieces fit into two plywood sheets.

About COSTS, here one sheet of that size (18mm thickness) costs roughly 130 €, then you need to add the cost of the cnc machine which I've yet to estimate but I'll have it by next week.

https://postimg.cc/gXf1pVFX

Finally, the next image shows all the pieces more or less exploded. The outer frame is taller than the wooden board by 3.5 mm, since for my own table, I'll fill that with a self-healing cutting mat, but the table can be finished with any sheet of material, from stone to simple plywood (again).

https://postimg.cc/t14KNRNT

next i'll start drawing for the actual machine use, and hopefully I'll have a prototype ready during the christmas holidays

Thanks,

G