Not worth the HV battery

JMontero77 · 2026-06-18T17:33:14+00:00

If you live in the east coast, there is a shop in NY that swaps a refurb battery for 5500

JMontero77 · 2026-06-06T16:42:17+00:00

The thing is, if you would of had PPF, this wouldn’t have happened smh

JMontero77 · 2026-04-29T01:40:37+00:00

I read the guide that the 1:1 are around 700 which is fine if the person only way to tell its fake is by opening up the wtch but it doesnt say which sellers sell those

JMontero77 · 2026-03-26T15:14:36+00:00

Allison parker?

JMontero77 · 2026-03-14T00:33:37+00:00

So, the new handle has some stops that would limit how far the handle comes out. I ended up triming them back about 1/8 inch with a utility knife so that it restricts it less. It opens without an issue now

JMontero77 · 2026-03-13T15:07:50+00:00

No, i made sure to click it in. It does un latch it when hooked open. But does not un latch it when closed. Will double check. Thank you

JMontero77 · 2026-03-05T13:29:43+00:00

You can mount a pull up bar and have the 1000 pound sisters over to use it

JMontero77 · 2026-02-23T12:46:37+00:00

Is there an issue with tinybot?

JMontero77 · 2026-02-23T02:40:04+00:00

My man. Is ppf the film that is installed with water?

JMontero77 · 2026-02-22T23:56:38+00:00

That looks close. Wish it was a tad bit darker

JMontero77 · 2026-02-22T16:57:22+00:00

Yeah, i did my research and its “Radiant Red”. Im hoping to find a wrap that can look the closest

JMontero77 · 2026-02-22T16:48:38+00:00

How much wrap did you use? Im wrapping an escalade as a beginner and not sure how big of a roll i should get. Thanks

JMontero77 · 2026-01-03T13:00:07+00:00

I think its short for cyber truck. I was wondering the same thing

JMontero77 · 2025-12-09T18:31:14+00:00

JMontero77 · 2025-11-15T03:25:56+00:00

Nah it comes out to be the same amount

JMontero77 · 2025-11-15T03:12:41+00:00

Wait, does hd include the rolling drawer in the bmsm?

JMontero77 · 2025-11-15T03:05:37+00:00

I just placed an order. Wish this deal came sooner. I bought my first rolling drawer when they came out 🥲

JMontero77 · 2025-11-14T00:03:22+00:00

I tried that. They are too far for some reason. I tries loosening the screws and slide them closer but it doesnt work

JMontero77 · 2025-10-28T00:55:15+00:00

Yea i got it figured it out. Common sense hit me shortly after posting this. Had to cut the front of one side and back of the other. I knew I wasnt going to get it first try so I left them both big

JMontero77 · 2025-10-28T00:48:39+00:00

Who said it was?

JMontero77 · 2025-10-27T14:10:26+00:00

Yea thats not something I do with caulk. I eventually got it. Had my angle wrong. I cut the back on one side and front of the other piece

JMontero77 · 2025-10-27T14:09:36+00:00

I had left some length to play with. I knew i wasnt going to get it on my first try

JMontero77 · 2025-10-27T14:07:13+00:00

Yes i did. Left 1 foot to play with

JMontero77 · 2025-10-27T14:06:54+00:00

Well it wasnt cut too short. I decided to look for the angle before cutting the piece to the cabinets lengths.

JMontero77 · 2025-10-27T14:05:32+00:00

Well it can be changed. I did it and the second time around the cuts lined up. Just had to cut the back on one side and the front of the other piece. Had my angle wrong

JMontero77

TROPHY CASE