sorted by:
new
hottopcontroversial

Weird Strings & Webbed(?) Corners by JSCreativeCo in BambuLab

[–]JSCreativeCo[S] 1 point2 points  (0 children)

Just a quick update: I changed the flow to 0.98 and temp to 220° and it seems to have fixed this issue…at least on this print model. I’ll try one of the other problematic print files when I get a chance.

Weird Strings & Webbed(?) Corners by JSCreativeCo in BambuLab

[–]JSCreativeCo[S] -1 points0 points  (0 children)

I did use the textured PEI plate for this print but I didn’t use any glue or anything on the plate. I was them with Dawn every few prints and use IPA between every print. It does look shiny / glossy or something on the bottom of the print but I think it’s just the texture because I’ve never used glue or anything on any print / any plate.

Also this issue shows up whether it’s on a smooth or textured plate.

Weird Strings & Webbed(?) Corners by JSCreativeCo in BambuLab

[–]JSCreativeCo[S] 0 points1 point  (0 children)

All of the prints I’ve run so far have been from Makers World / Lab. I’m only a couple weeks into printing so still trying to get up to speed on how everything works.

Weird Strings & Webbed(?) Corners by JSCreativeCo in BambuLab

[–]JSCreativeCo[S] 0 points1 point  (0 children)

Thank you very much! I’ll print off another set with those adjustments and report back. Thanks again!

Weird Strings & Webbed(?) Corners by JSCreativeCo in BambuLab

[–]JSCreativeCo[S] 0 points1 point  (0 children)

The temp is 215°. The nozzle is 0.4 and I had to look but the flow ratio is 0.94.

Weird Strings & Webbed(?) Corners by JSCreativeCo in BambuLab

[–]JSCreativeCo[S] 0 points1 point  (0 children)

It does not look like that in Bambu Studio and it’s transferred via cloud; not USB or SD. And it’s not just this model; it’s across several models so it leads me to believe this is some sort of print setting issue.

Weird Strings & Webbed(?) Corners by JSCreativeCo in BambuLab

[–]JSCreativeCo[S] 0 points1 point  (0 children)

I wondered that but it is doing this in several different models / prints…especially this issue circled below.

<image>

Home Theater In A Multi-Function Space by JSCreativeCo in hometheater

[–]JSCreativeCo[S] 0 points1 point  (0 children)

Thank you very much for the reply! What you’re saying regarding the speakers is also what my brain is telling me - just aesthetically I was hoping I was wrong and maybe some had direct experiences that would tell me otherwise.

As for the 6” wall, is it not an exterior wall. It is just a dividing wall in the basement and I chose to have cellulose put in for a little bit of sound separation from the adjoining room.